# Tubes for the Bogner Duende

### The Bogner Duende amplifier requires the following components:

× 5
12AX7

Russian made reissue of the original Tungsol. The Ultimate 12AX7. Big, warm, and musical. High Gain, ultra-low microphonics, and superb linearity with a dynamic 3-D sound. Available with gold pins.

Russian made reissue of the original Tungsol. The Ultimate 12AX7. Big, warm, and musical. High Gain, ultra-low microphonics, and superb linearity with a dynamic 3-D sound. Available with gold pins.

The JJ Electronic 12AX7 / ECC83 has quickly become a modern classic in preamp tubes. Its rugged design and rich harmonics make this tube an obvious choice for musicians who need a reliable and high quality tube at a reasonable price. The balanced tone of the JJ 12AX7 works well in any amp.

The JJ Electronic 12AX7 / ECC83 has quickly become a modern classic in preamp tubes. Its rugged design and rich harmonics make this tube an obvious choice for musicians who need a reliable and high quality tube at a reasonable price. The balanced tone of the JJ 12AX7 works well in any amp.

A high performance, long plate version of the ECC83 / 12AX7. Like all JJ preamp tubes, these are built into a rugged package using the spiral filament and robust plate structure resulting in low microphonics and high reliability. The long plate version of this tube differs from the standard version with its stronger and fuller sound. This tube will work in any 12AX7 or ECC83 position.

A high performance, long plate version of the ECC83 / 12AX7. Like all JJ preamp tubes, these are built into a rugged package using the spiral filament and robust plate structure resulting in low microphonics and high reliability. The long plate version of this tube differs from the standard version with its stronger and fuller sound. This tube will work in any 12AX7 or ECC83 position.

Genalex Gold Lion ECC83/B759 (12AX7) dual triode preamp tube with gold pins. Original Genalex Gold Lion ECC83/B759 tubes are considered among the best 12AX7 types ever made. They are hard to find and when they are available, they are expensive. They exhibit a large detailed soundstage that is sought after by discerning audiophiles who demand the highest quality sound. The reissue Genalex Gold Lion ECC83/B759 recreates the sound signature of the original. This tube features balanced sections and gold plated pins.

Genalex Gold Lion ECC83/B759 (12AX7) dual triode preamp tube with gold pins. Original Genalex Gold Lion ECC83/B759 tubes are considered among the best 12AX7 types ever made. They are hard to find and when they are available, they are expensive. They exhibit a large detailed soundstage that is sought after by discerning audiophiles who demand the highest quality sound. The reissue Genalex Gold Lion ECC83/B759 recreates the sound signature of the original. This tube features balanced sections and gold plated pins.

Miniature high-mu twin triode each section of which has an individual cathode connection - especially suited for use in resistance-coupled voltage amplifiers, phase inverters, multivibrators, and industrial-control circuits.

Russian-made Mullard Reissue 12AX7 dual triode. Large sound stage with excellent detail. Factory selected for low noise and microphonics. Great for hi-fi amps.

9 pin miniature preamp tube (Amplification Factor =100). Very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness. Selected with balanced systems and recommended for guitar amps to improve overall response.

Peavey 'Super 7' 12AX7

This Russian tube is full bodied and bright with a more straightforward presentation. It packs a lot of bite with its higher-than-normal gain. In overdrive, it offers a lot of crunchy fizz. High gain preamplifier tube with ultra low noise and detailed, musical tone. Unique spiral filament eliminates filament to cathode induced hum common on amplifiers that use AC on the filaments.

9 pin miniature preamp tube (Amplification Factor = 100). This Russian tube is full bodied and well balanced. It has a high gain with a very smooth presentation. In overdrive, it is not quite as defined as the 12AX7-S-JJ, but it offers more crunchy fizz.

9 pin miniature preamp tube (Amplification Factor = 100). This Russian tube has strong lows and bright highs. Its lows demand attention when playing full bar chords. In overdrive, it offers a lot of crunchy fizz.

Sovtek 12AX7WB dual triode.

Miniature high-mu twin triode each section of which as an individual cathode connection suited for use in resistance-coupled voltage amplifiers, phase inverters, multivibrators, andindustrial-control circuits where high voltage gain is desired.
Miniature, high-mu, twin triode primarily designed for use in low-level stages of high-gain audio-frequency amplifiers. Use of the 7025 in this application is advantageous because of its low hum output.

A dual triode that can be used in place of most 12AX7 circuits. The rugged build of this tube and reduced gain (30% less than a 12AX7) can improve headroom and give better control in high gain stages allowing users to more easily dial in sweet spots. The JJ 5751 features a smooth and balanced tone and a detailed response with low noise and low microphonics.

A new take on the classic 12AX7 preamp tube. While it uses the same rugged build and thick glass as other JJ preamp tubes, this tube differs in construction from the typical 12AX7 in that it features a medium-long plate, which provides a dynamic and open sound with a rich forward sounding mid range. This tube offers low noise and low microphonics.

Sovtek 12AX7WC dual triode preamp tube. Made in Russia.

Tung Sol 5751 dual triode preamp tube. Made in Russia. NOS specs call the 5751 a “special 12AX7” having a high-mu amplification factor of 70.

Low-noise Tube for Best Clean Tone! The TAD Selected 5751 is Tube Amp Doctor's first choice for noticeably improved clarity, smoothness, and a true vintage tone character for most guitar amps!

Warm, clean tone with creamy overdrive! PREMIUM selected quality for the most demanding amp stages. This tube works greatly for warm clean tones and creamy overdrive. We recommend this tube for the 1st gain stage and as input tube. It upgrades 12AX7A and ECC83 tubes and replaces E83CC tubes. The HIGHGRADE Selection is the tip-of-the-top quality at the lowest noise (microphony, hum, hiss) level. Typically only 0.5-2% out of the whole production of this tube meet the HIGHGRADE requirements.

$15.95 × 5$26.95 × 5
$12.95 × 5$22.50 × 5
$15.75 × 5$24.95 × 5
$24.75 × 5$43.95 × 5
$59.95 × 5$18.95 × 5
$19.35 × 5$20.50 × 5
$13.95 × 5$16.95 × 5
$14.75 × 5$16.75 × 5
$49.95 × 5$59.95 × 5
$14.95 × 5$13.95 × 5
$14.95 × 5$26.75 × 5
$24.95 × 5$30.95 × 5
× 1
5AR4
The YJR is a direct plug-in replacement adapter for use in most amplifiers that use 5AR4/GZ34, 5U4, 5Y3 or similar full-wave rectifier tubes. The YJR converts your amp's vacuum tube rectifier to a solid state rectifier, reducing tube sag for a tighter sound and feel. The tube rectifier can easily be swapped back in when sag is desired. This Yellow Jacket® is a solid state device and as such does not come with vacuum tubes.
• Converts most audio amplifiers which use a vacuum tube rectifier 5AR4/GZ34, 5U4 or 5Y3 to a solid state device.
• Safe for all common amplifiers and transformers.
All Yellow Jacket® converters have a one year warranty against manufacturer defects.
Chinese 5AR4 Vacuum Tube

The JJ Electronic GZ34 / 5AR4 is rugged rectifier at a reasonable price. JJ has a reputation for building sturdy tubes and this one is no exception. Users report that the JJ GZ34 / 5AR4 is a reliable rectifier in their Vox, Fender, and hifi amplifiers.

Octal rectifier tube (Max DC output current = 250 mA)

Tube Amp Doctor 5AR4 Rectifier, Premium Selected. A faithful reproduction of the Mullard/VALVO GZ34. Pure power and the typical sag is the distinguishing characteristic of the most popular guitar amps of the 1960s guitar heroes till today.

Solid State Rectifier Direct plug-in replacement for 5AR4, 5U4 and 5Y3 rectifier vacuum tubes in amplifiers with center tapped secondary power transformer. Use when less 'sag' is desired in the power supply; just switch back to the tube rectifier when 'sag' is desired.

Premium directly heated heavy duty rectifier Diode. Re-issue of the most popular rectifier valve ever built by Mullard. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied.

• Low internal voltage drop & controlled heater warm up time
• Excellent choice for both Hifi and instrument amplification
• Replacement/upgrade for all 5AR4/GZ34 types
Tung Sol 5AR4 rectifier tube. Made in Russia. Premium directly heated heavy duty rectifier Diode. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied. Tung-Sol tubes reflect the best in vintage construction with unsurpassed tone and reliability.
• Low internal voltage drop & controlled heater warm up time
• Excellent choice for both Hifi and instrument amplification
• Replacement/upgrade for all 5AR4/GZ34 types

Genalex Gold Lion U77 / GZ34 full-wave rectifier tube. Made in Russia.

$14.95 × 1$18.54 × 1
$17.75 × 1$21.95 × 1
$32.50 × 1$9.95 × 1
$39.95 × 1$34.85 × 1
42.95 × 1 × 2 6V6 Please make a selection above. Mullard 6V6GT tube. Made in Russia. This valve is built to stand the high voltages encountered in the Fender Deluxe Reverb and other guitar amplifiers that ran the valves above the published specification. The smooth and balanced frequency response also makes it suitable for hi-fi use. Genalex Gold Lion 6V6GT / CV511 beam-power tube. Made in Russia. This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. These tubes can cover a spectrum of sounds and styles all within the same amplifier. Totally Tweed! The preferred OEM tube of '50s-era Fender Tweed Champ and Deluxe amplifiers The Tungsol 6V6 has a geometry designed to safely handle the higher voltages used in guitar amps " plus heavier plate and grid materials. The result.. better mids and bottom while keeping the smooth top of the classic 6V6's. The Tungsol 6V6 breaks up evenly from low E to high up the neck. Blues players will LOVE these tubes for the way they sing! Octal power tube (Max Plate Watts = 14W) Beam power tetrode with a specially developed cathode coating, careful alignment of the grid, tri-alloy plate material for flawless performance up to 475 volts. Perfect for high plate voltage amplifiers like the Fender Deluxe Reverb. This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. These tubes can cover a spectrum of sounds and styles all within the same amplifier. This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. These tubes can cover a spectrum of sounds and styles all within the same amplifier. The 6V6 is a low-output power tube (12-18 watts) often used in Fender® amplifiers, including the Champ®, Deluxe™, Dual Professional, Vibro-King®, Princeton®, Vibrolux® and others. It has a very warm, round and soft response with rich harmonics, and distorts easily. One of the best choices ever produced for rehearsal and recording amplifiers. Our most premium design, for long life and professional performance. The choice for many pro players who use Groove Tubes in their favorite amps for recording and rehearsal; fully captures the spirit and sound of tube amps from the '50s and '60s to the present. Octal power tube (Max Plate Watts = 14W) Beam power tetrode with a specially developed cathode coating, careful alignment of the grid, tri-alloy plate material for flawless performance up to 475 volts. Perfect for high plate voltage amplifiers like the Fender Deluxe Reverb. Totally Tweed! The preferred OEM tube of '50s-era Fender Tweed Champ and Deluxe amplifiers The Tungsol 6V6 has a geometry designed to safely handle the higher voltages used in guitar amps " plus heavier plate and grid materials. The result.. better mids and bottom while keeping the smooth top of the classic 6V6's. The Tungsol 6V6 breaks up evenly from low E to high up the neck. Blues players will LOVE these tubes for the way they sing! Mullard 6V6GT tube. Made in Russia. This valve is built to stand the high voltages encountered in the Fender Deluxe Reverb and other guitar amplifiers that ran the valves above the published specification. The smooth and balanced frequency response also makes it suitable for hi-fi use. Genalex Gold Lion 6V6GT / CV511 beam-power tube. Made in Russia.59.00 × 1
$69.90 × 1$36.30 × 1
$60.00 × 1$42.90 × 1
$38.80 × 1$16.65 × 2
$54.95 × 1$19.95 × 2
$28.50 × 2$28.50 × 2
$33.95 × 2 Total price for all components:$0.00
 12AX7: Not selected 5AR4: Not selected 6V6: Not selected