Wire

Brown 2 conductor 18 gauge, stranded power cord, similar to woven cloth covered cords in early AC radios. 105°C temperature rating, 600V.

Easy to use cable tie gun cuts ties up to 50 lb. tensile. Use this tool to pull ties tightly and then cut the excess length.

High quality 42AWG Elektrisola P155 magnet wire with heavy (two coats) enamel. Perfect for winding coils, pickups, or transformers. Properties

• Very good solderability
• High thermal properties

Applications

• Small transformers
• Relays
• Solenoids
• Small motors
• Watch coils
• Transformers
• Instruments

Please note: Product length is based on weight and may vary slightly from the listed values. SKU Weight Approx. Length S-MW-42-2OZ 2 oz. 6200 ft S-MW-42-4OZ 4 oz. 12400 ft S-MW-42-8OZ 8 oz. 24800 ft S-MW-42-1LB 1 lb 49600 ft

2 to 1 heat shrink tubing variety pack with multiple colors in each size. This pack includes six different diameters ranging from 1/16” to 3/8”. Each piece is 4” in length. This set comes in a hard plastic case perfect for sorting and storing heat shrink. Features:

• Resistant to common fluids and solvents
• UL and CSA listed
• UV resistant
• Meets DEF. STAN 59.97
• Meets UL 224, 125°C and CSA C22.2 No. 198.1
• Meets MIL-DTL-23053/5 Class 2 & 3
• Flame retardant (Does not include transparent)
• Seals and protects cable splices and terminations.

Included Sizes (Diameter):

• 60 pieces - 1/16 in.
• 35 pieces - 3/32 in.
• 25 pieces - 1/8 in.
• 20 pieces - 3/16 in.
• 10 pieces - 1/4 in.
• 10 pieces - 3/8 in.

High quality 18AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required.

Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces

Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.

High quality 22AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required.

Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V rating. Tinned copper. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue

​​9 Pack (9 colors, 90 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue
• Orange
• Brown
• Purple

See S-W33 for 50 foot rolls of individual colors.

2 to 1 heat shrink tubing variety pack. This pack includes six different diameters ranging from 1/16” to 1/2”. Each piece is 2.5” in length. This set comes in a hard plastic case perfect for sorting and storing heat shrink. Features:

• Resistant to common fluids and solvents
• UL and CSA listed
• UV resistant
• Meets DEF. STAN 59.97
• Meets UL 224, 125°C and CSA C22.2 No. 198.1
• Meets MIL-DTL-23053/5 Class 2 & 3
• Flame retardant (Does not include transparent)
• Seals and protects cable splices and terminations.

Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue

​​9 Pack (9 colors, 90 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue
• Orange
• Brown
• Purple

See S-W22 for 50 foot rolls of individual colors.

The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 23.

Fender® replacement pre-cut standard fret wire (24 pieces). Pre-radiused to 9.5"
Features:

• 24 pre-cut standard frets for guitar fingerboards
• Pre-radiused to 9.5"
• Each piece .046" tall and .103 wide

The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 27.

Fender® replacement pre-cut vintage fret wire. Pre-radiused to 7.25"
Features:
24 vintage-style pre-cut frets for guitar fingerboards
Pre-radiused to 7.25"
Each piece .039" tall and .084 wide

The ZipWire™ Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.

600V solid wire. UL style 1015, rated to 105 degrees C. Perfect for new projects, rewiring electrical equipment, or use in breadboards, perfboard, and veroboard/stripboard.

High quality 24AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required. This wire is ready to go as soon as it is cut and stripped making assembly that much easier. Rated at 300V and offered in a variety of colors, this wire is a great option for a variety of different projects.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 28 gauge, 200 foot. 105°C temperature rating, 600V.

600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 24 gauge, 200 foot. 105°C temperature rating, 600V.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 32 gauge, 400 foot. 105°C temperature rating, 600V.

Solid tinned copper bus wire. 105°C temperature rating, 600V.

22 AWG stranded hook-up wire on a 50 foot roll. This wire is smaller than our other wire options which makes it perfect for tight spaces like effects pedal and other small electronic projects. Strands are tinned individually. See photo for detail.