Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.

New Old Stock (NOS)

Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
T-5AW4 Vacuum Tube - 5AW4, Rectifier, Full Wave
High-vacuum rectifier intended for use as a full-power rectifier in television receivers.
Out of Stock
T-6384 Vacuum Tube - 6384, Beam Power Amplifier
High-perveance beam power amplifier designed as a direct retrofit for the 6AR6 or 6098 in aircraft, military, and industrial applications
T-6CG7_6FQ7 Vacuum Tube - 6CG7 / 6FQ7, Triode, Dual
Miniature medium-mu twin triode suitable for use in a wide variety of general-purpose applications. It is particularly useful as a vertical-deflection oscillator and horizontal-deflection oscillator in television receivers.
T-6GT5-A Vacuum Tube - 6GT5-A, Beam Power Amplifier
Beam power tube for horizontal deflection amplifier service in black-and-white TV receivers.
T-6U10 Vacuum Tube - 6U10, Triode, Triple
Compactron containing two medium-mu triodes and one high-mu triode.
T-7G7_1232 Vacuum Tube - 7G7 / 1232, Pentode
Sharp cut-off pentode voltage amplifier designed for use in television or other high-frequency amplifiers where the low impedance circuits required result in low gain which may be partially compensated for by use of a high transconductance tube.
T-14Q7 Vacuum Tube - 14Q7, Heptode
Pentagrid converter designed for use as a combined oscillator and mixer in superheterodyne receiver. The electrical characteristics of the 14Q7 are similar to those of the 12SA7
T-12SK7 Vacuum Tube - 12SK7, Pentode, Remote Cut-Off
The T-12SK7 is the same as the 6SK7 except for heater ratings.
T-50EH5 Vacuum Tube - 50EH5, Pentode, Power Amplifier
Miniature power pentode primarily designed for use in the audio-frequency power output stage of radio receivers and phonographs. The tube features high power sensitivity at low plate and screen voltages.
T-6AH4GT Vacuum Tube - 6AH4GT, Triode
High perveance triode for use as a vertical deflection amplifier in television receivers.
T-6C8G Vacuum Tube - 6C8G, Dual Triode
General purpose twin triode having two independent units, with all electrodes brought out to separate terminals.
T-6J5GT Vacuum Tube - 6J5GT, Triode, Medium MU
General-purpose triode designed for use as a detector, amplifier, or oscillator. Features include a relatively high transconductance and a medium amplification factor.
T-6P5GT Vacuum Tube - 6P5GT, Triode, Medium MU
General purpose triode designed for service as an oscillator, detector, or amplifier
T-117Z6GT Vacuum Tube - 117Z6GT, Dual Rectifier doubler
Full-wave rectifier designed for use in three-way portable receivers. Except for a common heater, the rectifier sections are separate, permitting the tube to be used as a full-wave or a half-wave rectifier, or as a voltage doubler.
T-26LX6 Vacuum Tube - 26LX6, Beam Power Amplifier
Compactron beam-power pentode primarily designed for use as the horizontal-deflection amplifier in color television receivers. It is characterized by having a very low knee with a very high peak current of over an ampere.
T-6Q7 Vacuum Tube - 6Q7, Dual Diode, Triode
Combines two diodes and a high-mu triode using a common cathode. It is designed for service as a diode detector, AVC rectifier, and as a high gain resistance coupled amplifier in AC, storage battery, and AC - DC operated receivers.
T-7408_6V6GT Vacuum Tube - 7408 / 6V6GT, Beam Power Amplifier
Beam power pentode primarily designed for use in audio frequency power amplifier applications. The tube is a direct replacement for the 6V6Gt, but features additional controlled zero-bias characteristics.
T-12DZ6 Vacuum Tube - 12DZ6, Pentode, Remote Cut-Off
Pentode in the 7-pin miniature construction. It is intended for use as an RF amplifier in automobile radio receivers and is designed to operate with its plate and screen voltages supplied directly from a 12-volt storage battery.
T-12AY7 Vacuum Tube - 12AY7, Triode, Dual
Miniature medium-mu twin triode designed primarily for use in low-level stages of high-gain audio-frequency amplifiers. The tube is specially designed to exhibit low noise and low microphonic output.
T-3S4_DL92 Vacuum Tube - 3S4 / DL92, Pentode, Power
Filamentary type power output pentode in the miniature construction. It is characterized by economy of filament power and ability to perform well at low plate supply voltages such as encountered in portable equipment.
T-6189_12AU7WA Vacuum Tube - 6189 / 12AU7WA, Triode, Dual, Medium MU
Miniature medium-mu twin triode suitable for a wide variety of general-purpose amplifier, oscillator, and multivibrator applications.
T-6B5 Vacuum Tube - 6B5, Dual Triode
Consists of two dynamically coupled triodes and is designed for service in the power output stage of AC and storage battery operated receivers. All necessary biases are supplied internally
T-6EA7_6EM7 Vacuum Tube - 6EA7 / 6EM7, Triode, Double
Dissimilar double-triode designed for use as a combined vertical-deflection oscillator and amplifier in television receivers.
T-6JZ6 Vacuum Tube - 6JZ6, Beam Power Amplifier
Compactron beam-power pentode designed for use in the horizontal deflection amplifier in television receivers. A separate connection is provided for the beam plates to minimize "snivets".
Don't see what you're looking for? Send us your product suggestions!