Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.

New Old Stock (NOS)

Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
T-5814A Vacuum Tube - 5814A, Triode, Dual, Medium MU
Medium-mu twin triode 9-pin miniature type, intended for applications where dependable performance under shock and vibration is paramount. The 5814A is a "premium" version of the 12AU7.
T-5672_DL69 Vacuum Tube - 5672 / DL69, Pentode
Subminiature pentode for use as an A.F. power amplifier in portable equipment.
T-6BQ7A_6BZ7 Vacuum Tube - 6BQ7A / 6BZ7, Dual Triode
Miniature, medium-mu twin triode primarily designed for use as a cascode, radio-frequency amplifier in very high frequency television tuners. In this application, its performance is characterized by high gain and low noise figure.
T-6BX6_EF80 Vacuum Tube - 6BX6 / EF80, Pentode
Pentode for use as RF, IF, or video amplifying valve or mixing valve in television receivers.
T-6SG7 Vacuum Tube - 6SG7, Pentode, Semi Remote
Remote-cutoff pentode designed for use as a high-gain radio or intermediate-frequency amplifier. Features of the tube include high transconductance, low grid-plate capacitance, and a dual cathode connection
T-6KH8_ECLL800 Vacuum Tube - 6KH8 / ECLL800, Triode, Dual Pentode, AF
Triode, Dual Pentode, AF
Out of Stock
T-12DZ6 Vacuum Tube - 12DZ6, Pentode, Remote Cut-Off
Pentode in the 7-pin miniature construction. It is intended for use as an RF amplifier in automobile radio receivers and is designed to operate with its plate and screen voltages supplied directly from a 12-volt storage battery.
T-12SA7 Vacuum Tube - 12SA7, Heptode
Pentagrid converter designed to minimize frequency drift. They are intended for service as combined oscillators and mixers in AC, storage battery, and AC/DC operated superheterodynes.
T-8SN7GTB Vacuum Tube - 8SN7GTB, Dual Triode
Medium-mu triode intended for use as a combined vertical oscillator and vertical deflection amplifier in 450 mA. series heater operated television receivers.
Out of Stock
T-35Y4 Vacuum Tube - 35Y4, Rectifier, Half Wave
Half-wave high-vacuum rectifier designed for use in a-c/d-c receivers. The heater is tapped to permit operation of a panel lamp.
T-6688_E180F-GP Vacuum Tube - 6688 / E180F, Philips, Pentode, RF, Gold Pin
Special quality pentode designed for use as wide band amplifier.
Save 50%
Originally: $12.55
T-6669_6AQ5A Vacuum Tube - 6669 / 6AQ5A, Tetrode, Beam Power
Miniature beam-power pentode designed for use as an audio-frequency power amplifier.
Out of Stock
T-6EV7 Vacuum Tube - 6EV7, Dual Triode, High MU
Miniature high-mu twin triode having separate cathodes. It is designed for service as a relay-control tube in remote tuning units of television receivers.
T-6F7 Vacuum Tube - 6F7, Pentode
Combines a triode and a remote cut-off pentode, utilizing a common cathode, in a single bulb.
T-80-ST Vacuum Tube - 80, Rectifier, Full Wave, ST Glass
Filamentary full-wave high-vacuum rectifier designed for use in the power supply of a-c operated equipment
Starting at $17.60
T-7308_E188CC Vacuum Tube - 7308 / E188CC, Dual Triode
Special quality double triode designed for use as cascode amplifier, cathode follower, etc. in RF and AF circuits.
T-1LE3_1LF3 Vacuum Tube - 1LE3 / 1LF3, Triode
Low-voltage, low-current drain, battery type triode. It is designed for service as an oscillator, detector, or amplifier in receivers using 90 volts "B" battery and a single dry cell "A" battery.
T-6K11_6Q11 Vacuum Tube - 6K11 / 6Q11, Triode, Triple
Compactron device containing two high-mu triodes and one medium-mu triode. Features of the tube include separate pin connections for all three cathodes, grids, and plates; an internal shield between sections 1 and 3.
T-6HS6 Vacuum Tube - 6HS6, Pentode, Sharp Cut-Off, RF
Sharp cutoff pentode of the 7 pin miniature type with heater having controlled warm-up time.
T-12A6 Vacuum Tube - 12A6, Tetrode, Beam Power
Heater-cathode type beam-power amplifier tube designed for use in the audio-output stage of ac or ac/dc receivers.
T-12AV6 Vacuum Tube - 12AV6, Diode, Dual Triode
Combines a high mu triode and two independent diode units in the 7-pin miniature construction. It permits a single tube to function as detector, AVC rectifier, and audio amplifier.
T-7G7_1232 Vacuum Tube - 7G7 / 1232, Pentode
Sharp cut-off pentode voltage amplifier designed for use in television or other high-frequency amplifiers where the low impedance circuits required result in low gain which may be partially compensated for by use of a high transconductance tube.
T-25Z6GT Vacuum Tube - 25Z6GT, Dual Rectifier
Heater-cathode type full-wave high-vacuum rectifier doubler tube designed for use in the power supply of a-c or a-c/d-c receivers. Eletrically the 25Z5, 25Z6, and 25Z6GT are identical.
T-6060_ECC801 Vacuum Tube - 6060 / ECC801, Triode, Dual
Miniature type double triode employing the 9 pin glass button base, having the same general characteristics as the 12AT7 and as a frequency changer, opoerating at frequencies up to 500 Mc/s.
Out of Stock
Don't see what you're looking for? Send us your product suggestions!