# Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 12AD6 / 12AG6, Heptode
Miniature heptode primarily intended to perform the combined functions of mixer and oscillator in automobile radio receivers. Specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.
$3.90 Vacuum Tube - 14Q7, Heptode Pentagrid converter designed for use as a combined oscillator and mixer in superheterodyne receiver. The electrical characteristics of the 14Q7 are similar to those of the 12SA7$5.90
Vacuum Tube - 1L6, Heptode
Miniature type pentagrid converter designed for use in low drain battery operated receivers.
Starting at $40.65 Partially Out of Stock Vacuum Tube - 1LA6, Heptode Low-voltage, low-current drain battery type pentagrid converter. It is designed for service as an oscillator and mixer in superheterodyne receivers which require only 90 volts of "B" battery and a single dry cell "A" battery.$11.90
Vacuum Tube - 1LC6, Heptode
Filament-type pentagrid converter designed particularly for use in low drain battery-operated equipment. This tube will operate satisfactorily with only 45 volts B supply.
$4.90 Vacuum Tube - 1R5 / DK91, Heptode Miniature pentagrid-converter designed for use as a combined mixer and oscillator in superheterodyne circuits. Because of its small size and high operating efficiency, the 1R5 is especially adapted for compact, battery-operated equipment.$5.90
Vacuum Tube - 5750 / 6BE6W, Heptode
Miniature pentagrid converter designed for use as a combined mixer and oscillator in superheterodyne circuits.
$4.90 Vacuum Tube - 6BA7, Heptode Cathode type high gain pentagrid converter in the small 9 pin button construction. It is designed for service as a combined local oscillator and mixer at high frequencies, especially in the FM broadcast band.$9.90
Vacuum Tube - 6BY6, Heptode
Miniature dual-control heptode designed primarily for use as a combined sync separator and sync clipper in television receivers. Each of the two independent control grids exhibits a sharp cutoff characteristic.
$2.95 Save 50% Originally:$5.90
Vacuum Tube - 6CS6 / EH90, Heptode
Miniature dual control pentagrid tube intended for use in sync separator circuits. In these circuits it provides improved noise immunity. Both control grids have sharp cut-off characteristics.
$2.45 Save 50% Originally:$4.90
Vacuum Tube - 6J8G, Triode, Heptode
Converter tube designed for stable operation over an extended frequency range. It consists of a heptode mixer and a triode oscillator, having a common cathode. The injector grid of the heptode is internally connected to the triode grid.
$18.90 Vacuum Tube - 6L7, Heptode Mixer tube designed for service with a separate oscillator as the first detector in superheterodyne receivers. The control grid is of the remote cut-off type which allows the use of AVC and minimizes cross-modulation.$5.90
Vacuum Tube - 6SA7, Heptode
Metal pentagrid converter. It is intended to perform the combined functions of the mixer and oscillator in superheterodyne receivers, especially those of the all-wave type. The 6SA7 is constructed to provide excellent frequency stability.
$3.90 Vacuum Tube - 7B8, Heptode Pentagrid converter designed to perform the combined functions of the oscillator and mixer in superheterodyne receivers$1.95
Save 50%
Originally: $3.90 Vacuum Tube - 12BH7, Electro-Harmonix Superior medium-mu twin triode driver tube for hifi use. 3.5 watts dissipation per plate. New design of excellent quality Starting at$17.85
Vacuum Tube - 6L6GC, JJ Electronics
The JJ Electronic 6L6GC is the classic pentode built with the rugged construction that only JJ could deliver. At 30W, this tube delivers plenty of headroom. The highs are clear and responsive with warm mids and tight solid lows. Known for their reliability and articulation, the JJ 6L6GC is a great option guitar amplifiers and Hi-Fi stereo equipment.
Starting at $18.25 Vacuum Tube - 6V6, JJ Electronics This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. These tubes can cover a spectrum of sounds and styles all within the same amplifier. Starting at$15.95
Vacuum Tube - E34L, JJ Electronics
The JJ Electronic E34L adds more power to a standard EL34 due to its higher grid voltage rating. This increase gives the tube more headroom and a tighter response on the low end. The wide frequency response of this tube offers excellent harmonics that work in a variety of genres ranging from the cleanest cleans to rich and aggressive breakup.
Starting at $15.50 Vacuum Tube - ECC802 / 12AU7, JJ Electronics, Long Plate A high performance, long plate version of the ECC82 / 12AU7. Like all JJ preamp tubes, these are built into a rugged package using the spiral filament and robust plate structure resulting in low microphonics and high reliability. The long plate version of this tube differs from the standard version with its stronger and fuller sound which offers a wider and more balanced frequency response. Starting at$13.45
Vacuum Tube - ECC803 / 12AX7, JJ Electronics, Long Plate
A high performance, long plate version of the ECC83 / 12AX7. Like all JJ preamp tubes, these are built into a rugged package using the spiral filament and robust plate structure resulting in low microphonics and high reliability. The long plate version of this tube differs from the standard version with its stronger and fuller sound. This tube will work in any 12AX7 or ECC83 position.
Starting at $13.95 Vacuum Tube - ECC99, JJ Electronics The JJ Electronic ECC99 is a noval based dual triode. This tube features a rugged construction and is also available with gold pins. The ECC99 is typically used as a driver for power triodes in 2A3 and 300B amplifiers but can also be used as a power tube in small amps and headphone amps. This tube can also be a functional replacement for 5687, E182CC, 6840, and 6BL7 tubes. Note: Sockets on some of these types could have a different set-up. Starting at$15.95
Vacuum Tube - EF806 / EF86 / 6267, JJ Electronics, Long Plate
The JJ Electronic EF806S is a high quality reproduction of the classic EF86. This pentode features a robust construction with the internal shielding used in the original tubes. The JJ EF806 can be used in any EF86 circuit including microphones and amplifiers.
Starting at $29.95 Vacuum Tube - EL34, JJ Electronics Another classic from JJ. This tube features a rugged construction leading to an incredibly reliable EL34 with astonishing tone. Overall the sound is nicely balanced with tight lows, a rich and dynamic mid range and clear highs. The JJ EL34 is a great replacement for guitar amplifiers and stereo amps as well. Starting at$14.95
Vacuum Tube - EL84, JJ Electronics
The JJ Electronic EL84 is a solidly built EL84 / 6BQ5 with excellent tonal qualities. JJ’s rugged construction of this tube offers high reliability without any compromise to the sound. This tube has solid lows with warm bright mids and shimmery highs. When saturated the harmonics are rich and dynamic. The JJ EL84 nails the classic sound of this tube. This tube can replace any EL84 or 6BQ5 tube.
Starting at \$10.95
Don't see what you're looking for? Send us your product suggestions!