The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 7B8, Heptode
Pentagrid converter designed to perform the combined functions of the oscillator and mixer in superheterodyne receivers
Vacuum Tube - 6CS6 / EH90, Heptode
Miniature dual control pentagrid tube intended for use in sync separator circuits. In these circuits it provides improved noise immunity. Both control grids have sharp cut-off characteristics.
Vacuum Tube - 6BY6, Heptode
Miniature dual-control heptode designed primarily for use as a combined sync separator and sync clipper in television receivers. Each of the two independent control grids exhibits a sharp cutoff characteristic.
Vacuum Tube - 12AD6 / 12AG6, Heptode
Miniature heptode primarily intended to perform the combined functions of mixer and oscillator in automobile radio receivers. Specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.
Vacuum Tube - 6SA7, Heptode
Metal pentagrid converter. It is intended to perform the combined functions of the mixer and oscillator in superheterodyne receivers, especially those of the all-wave type. The 6SA7 is constructed to provide excellent frequency stability.
Vacuum Tube - 1LC6, Heptode
Filament-type pentagrid converter designed particularly for use in low drain battery-operated equipment. This tube will operate satisfactorily with only 45 volts B supply.
Vacuum Tube - 5750 / 6BE6W, Heptode
Miniature pentagrid converter designed for use as a combined mixer and oscillator in superheterodyne circuits.
Vacuum Tube - 14Q7, Heptode
Pentagrid converter designed for use as a combined oscillator and mixer in superheterodyne receiver. The electrical characteristics of the 14Q7 are similar to those of the 12SA7
Vacuum Tube - 1R5 / DK91, Heptode
Miniature pentagrid-converter designed for use as a combined mixer and oscillator in superheterodyne circuits. Because of its small size and high operating efficiency, the 1R5 is especially adapted for compact, battery-operated equipment.
Vacuum Tube - 6L7, Heptode
Mixer tube designed for service with a separate oscillator as the first detector in superheterodyne receivers. The control grid is of the remote cut-off type which allows the use of AVC and minimizes cross-modulation.
Vacuum Tube - 6BE6 / EK90, Heptode
Miniature heptode primarily designed to perform the combined functions of the mixer and oscillator in superheterodyne circuits in both the standard broadcast and FM bands.
Vacuum Tube - 12BE6 / HK90, Heptode
Miniature pentagrid converter designed to perform simultaneously the combined functions of the mixer and oscillator in superheterodyne receivers. The tube is suitable for use in the standard broadcast and FM bands.
Vacuum Tube - 12SA7, Heptode
Pentagrid converter designed to minimize frequency drift. They are intended for service as combined oscillators and mixers in AC, storage battery, and AC/DC operated superheterodynes.
Vacuum Tube - 6AJ8 / ECH81, Triode, Heptode
Triode-heptode for use in F.M., AM/FM, A.M, and television receivers.
Vacuum Tube - 6BA7, Heptode
Cathode type high gain pentagrid converter in the small 9 pin button construction. It is designed for service as a combined local oscillator and mixer at high frequencies, especially in the FM broadcast band.
Vacuum Tube - 12AT7 / ECC81, JJ Electronics
A good choice for phase inverters, reverb drivers, and general preamp use. This tube offers low noise, low microphonics, and warm smooth tones at a great price. Like all JJ tubes, it has a rugged construction that doesn’t compromise the sound of your amp. The JJ 12AT7 is a solid replacement for any 12AT7, ECC81, or 6201 tube. It can also be used to replace 12AX7 tubes in position 1 to reduce gain.
Starting at $10.95
Vacuum Tube - 12AU7 / ECC82, JJ Electronics
A medium gain dual triode built with the quality and reliability that we’ve come to expect from a JJ tube. This 12AU7 offers smooth tones and clear definition which is why it’s no surprise that this tube is often found in hifi equipment as well as guitar amplifiers.
Starting at $10.95
Vacuum Tube - 12AX7 / ECC83, JJ Electronics
The JJ Electronic 12AX7 / ECC83 has quickly become a modern classic in preamp tubes. Its rugged design and rich harmonics make this tube an obvious choice for musicians who need a reliable and high quality tube at a reasonable price. The balanced tone of the JJ 12AX7 works well in any amp.
Starting at $10.95
Vacuum Tube - 1LA6, Heptode
Low-voltage, low-current drain battery type pentagrid converter. It is designed for service as an oscillator and mixer in superheterodyne receivers which require only 90 volts of "B" battery and a single dry cell "A" battery.
Vacuum Tube - 12AU7A / ECC82, Electro-Harmonix
Superior medium-Mu Twin Triode for use in preamplifier and driver circuits. Standard replacement for all circuits requiring 12AU7/ECC82 types.
Starting at $12.95
Vacuum Tube - 12DW7 / ECC832, JJ Electronics, Dual Triode
In the 12DW7/ECC832, Section 1 of the tube (pins 6, 7, and 8) is the high gain 12AX7/ECC83 spec (gain factor 100) and Section 2 (pins 1, 2, and 3) is the low gain 12AU7/ECC82 spec (gain factor 17).
Starting at $12.95
Vacuum Tube - 12AX7 / ECC83, Electro-Harmonix
This Russian tube is full bodied and bright with a more straightforward presentation. It packs a lot of bite with its higher-than-normal gain. In overdrive, it offers a lot of crunchy fizz. High gain preamplifier tube with ultra low noise and detailed, musical tone. Unique spiral filament eliminates filament to cathode induced hum common on amplifiers that use AC on the filaments.
Starting at $13.25
Vacuum Tube - ECC802 / 12AU7, JJ Electronics, Long Plate
A high performance, long plate version of the ECC82 / 12AU7. Like all JJ preamp tubes, these are built into a rugged package using the spiral filament and robust plate structure resulting in low microphonics and high reliability. The long plate version of this tube differs from the standard version with its stronger and fuller sound which offers a wider and more balanced frequency response.
Starting at $13.45
Vacuum Tube - 6922 / E88CC, JJ Electronics
The JJ Electronic E88CC / 6922 is a great replacement for any 6922, 6DJ8, or E88CC tube. JJ implements a solid construction that those familiar with their preamp tubes will find familiar. This tube’s high end clarity and warm smooth mids make the JJ E88CC and excellent choice for Hi-Fi preamps and amplifiers.
Starting at $13.95