The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
JJ ElectronicsJJ vacuum tubes and capacitors are widely used in guitar and audio amplifiers, recording studio equipment and in a variety of applications for audiophiles.
New Old Stock (NOS)Our new-old-stock tubes were made by the major U.S. manufacturers, along with a small number of European manufacturers and are tested and guaranteed.
Vacuum Tube - 2A3, JJ Electronics
The JJ Electronic 2A3 features a robust construction in a beautiful thick glass envelope. The JJ 2A3 offers 40 Watts of plate dissipation which far surpasses the headroom of other 2A3 tubes by 25 Watts. The single plate build and increased ratings give this tube the highest reliability. The JJ 2A3 has amazing detail and clarity with excellent separation.
Starting at $129.95
Vacuum Tube - 2A3, RCA, Triode, Power Amplifier
Three-electrode, high-vacuum type of power amplifier tube for use in the power-output stage of a-c operated receivers. The exceptionally large power-handling ability of the 2A3 is the result of its design features.
Out of Stock
Vacuum Tube - 5V6GT, Tetrode, Beam Power
Beam power amplifier designed for service in the output stage of 600mA series heater operated TV receivers. It has high power sensitivity and high power output with comparatively low supply voltage.
Vacuum Tube - 6A3, Triode, Power Amplifier
Filament type triode power amplifier designed for service in the output stage of audio amplifiers where high output and low harmonic distortion are desired. Its ratings and characteristics are similar to those of the 2A3 and 6B4G.
Out of Stock
Vacuum Tube - 6AG7 / 6AK7, Pentode, Power
Metal, power-amplifier pentode primarily designed for use in the output stage of video amplifiers. The tube is capable of operating at high plate current levels and exhibits high transconductance and high power sensitivity.
Vacuum Tube - 6AQ5A / 6HG5, Tetrode, Beam Power
Miniature beam-power pentode designed for use in the audio-frequency power output stage of television and radio receivers. It may also be used as a triode-connected vertical deflection amplifier in television receivers.
Vacuum Tube - 6AR5, Pentode, Power
Pentode power amplifier using the miniature construction. It is intended for service in AC and storage battery operated receivers where moderate power sensitivity and power output is desired.
Vacuum Tube - 6B4G, Triode, Power Amplifier
Glass triode power amplifier tube designed particularly for service in the power output stages of storage battery operated or a-c receivers
Vacuum Tube - 6BM8 / ECL82, Triode, Pentode, Power
The 6BM8 contains both a power pentode and triode. It has a pentode plate dissipation rating of 7 watts with convection cooling.
Vacuum Tube - 6CA5 / 6EH5, Tetrode, Beam Power
Miniature beam power pentode designed for service as an audio output amplifier. It features high power sensitivity at relatively low plate and screen voltages.
Vacuum Tube - 6CA7, JJ Electronics
A true to form reproduction of a classic tube that will work in most EL34 amps. The 6CA7 is often considered the American cousin to the British EL34. Sonically, this tube is closer to a 6L6 than an EL34 but without the sometimes harsh high end of the 6L6.
Starting at $16.45
Vacuum Tube - 6CL6, Pentode, Power
Miniature power pentode designed primarily for use as the video output amplifier in television receivers. The tube exhibits high transconductance, high power sensitivity, and low interelectrode capacitances.
Vacuum Tube - 6CM6, Tetrode, Beam Power
Miniature beam power pentode designed for service as a general purpose audio power amplifier or vertical deflection amplifier in television receiver sweep circuits
Vacuum Tube - 6CW5 / EL86, Pentode, Power Amplifier
The 6CW5 is an A.F. output pentode in the 9 pin miniature construction. It is intended for use in single-ended push-pull output stages.
Vacuum Tube - 6CZ5, Tetrode, Beam Power
9 pin miniature type beam power tube. Its heater has a controlled warm-up time.
Vacuum Tube - 6DG6GT / 6W6GT, Beam Power Amplifier
Beam power pentode intended for service as an audio power amplifier.
Vacuum Tube - 6DQ6A-B / 6GW6, Beam Power Amplifier
High-perveance beam power pentode designed for use as a horizontal deflection amplifier tube in high efficiency deflection circuits of television receivers.
Vacuum Tube - 6EM5, Beam Power Amplifier
High-vacuum, heater-cathode type of tube designed to indicate visually the effect of change in the controlling voltage. The tube is essentially a voltage indicator and as such is particularly useful to facilitate exact tuning of a radio receiver.
Vacuum Tube - 6F6, Pentode, Power
Pentode amplifier designed for application in power output stages of receivers
Vacuum Tube - 6G6G, Pentode, Power Amplifier
Pentode power amplifier designed for service where economy in current consumption is desired.
Vacuum Tube - 6GE5, Beam Power Amplifier
Compactron beam power pentode designed for use as the horizontal deflection amplifier in television receivers.
Vacuum Tube - 6GW8 / ECL86, Triode, Pentode, Power
High-mu triode sharp-cutoff pentode
Vacuum Tube - 6JE6C / 6LQ6, Beam Power Amplifier
Beam pentode featuring Novar construction with a special plate fin. The fin provides improved heat distribution and a greater plate dissipation capability. This in turn increases reliability under rated conditions.
Vacuum Tube - 6JN6, Beam Power Amplifier
Compactron beam-power pentode primarily designed for use as the horizontal-deflection amplifier in television receivers. A separate connection is provided for the beam plates to minimizes "snivets".