Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.

Yellow Jackets

Yellow Jackets allows amplifiers using common power tubes to use EL84s without modification or rebiasing.

Ruby

Ruby tubes are manufactured in China and tested for quality and performance.

New Old Stock (NOS)

Our new-old-stock tubes were made by the major U.S. manufacturers, along with a small number of European manufacturers and are tested and guaranteed.
T-0A2_150C2 Vacuum Tube - 0A2 / 150C2, Voltage Regulator, Diode, Glow-Discharge
0A2 or 150C2 - Voltage Regulator, Diode, miniature glow-discharge type.
$6.90
T-0A3_VR75 Vacuum Tube - 0A3 / VR75, Voltage Regulator, Diode, Glow-Discharge
Voltage Regulator, Diode, Glow-Discharge type.
$6.90
T-0B2 Vacuum Tube - 0B2, Voltage Regulator, Diode, Glow-Discharge
The 0B2 is a two-electrode, inert-gas-filled cold cathode miniature tube intended for use as a voltage regulator.
$5.90
T-0B3_VR90 Vacuum Tube - 0B3 / VR90, Voltage Regulator
The 0B3 is a two-element gas-filled, cold cathode voltage regulator. It is designed to provide regulated outputs of approximately 90 volts.
$3.90
T-0C2 Vacuum Tube - 0C2, Voltage Regulator, miniature
The 0C2 is a cold cathode, gas-filled diode of miniature construction designed for use as a voltage regulator.
$8.90
T-0C3-A_VR105 Vacuum Tube - 0C3-A / VR105, Voltage Regulator
The 0C3-A is a two-element gas filled, cold cathode voltage regulator. It is designed to provide a regulated output of approximately 105 volts.
$6.90
T-0D3-A_VR150 Vacuum Tube - 0D3-A / VR150, Voltage Regulator
The 0D3-A is a two-element gas filled, cold cathode voltage regulator. It is designed to provide a regulated output of approximately 150 volts.
$6.15
T-0Z4-A Vacuum Tube - 0Z4-A, Rectifier, Full Wave, Gas
The 0Z4A is a gas-filled, double diode employing an ionic-heated cathode. Its principal application is as a full-wave power rectifier in equipment with vibrator type power supplies.
$3.90
T-1A5GT Vacuum Tube - 1A5GT, Pentode, Power Amplifier
Filament type power-amplifier pentode designed for use in the output stage of low drain battery operated equipment. The 1A5GT may be operated singly or in push-pull combination.
$4.90
T-1A7GT Vacuum Tube - 1A7GT, Pentagrid Converter
Filament type pentagrid converter designed for service as a combined mixer and oscillator tube in low drain battery operated equipment.
$4.90
T-1G4GT Vacuum Tube - 1G4GT, Triode, Medium MU
Filament type general purpose triode especially designed for use in low drain battery operated receivers.
$14.90
T-1H4G Vacuum Tube - 1H4G, Triode, Medium MU
General purpose filament type triode designed for service in battery operated receivers. With the exception of capacitances its ratings and characteristics are identical with those of the 30.
$15.90
T-1H5GT-G Vacuum Tube - 1H5GT-G, Diode, Triode, High MU
Tube containing a single diode and a high-mu triode in one bulb. It is designed for service as a diode detector, AVC rectifier, and as a resistance-coupled amplifier.
$3.90
T-1L6 Vacuum Tube - 1L6, Heptode
Miniature type pentagrid converter designed for use in low drain battery operated receivers.
Starting at $40.65
Partially Out of Stock
T-1LA6 Vacuum Tube - 1LA6, Heptode
Low-voltage, low-current drain battery type pentagrid converter. It is designed for service as an oscillator and mixer in superheterodyne receivers which require only 90 volts of "B" battery and a single dry cell "A" battery.
$11.90
T-1LB4 Vacuum Tube - 1LB4, Pentode, Power
Low-voltage, low-current drain, battery type power pentode. It is designed for service with 90 volts of "B" battery and a single dry cell "A" battery.
$11.90
T-1LC6 Vacuum Tube - 1LC6, Heptode
Filament-type pentagrid converter designed particularly for use in low drain battery-operated equipment. This tube will operate satisfactorily with only 45 volts B supply.
$4.90
T-1LD5 Vacuum Tube - 1LD5, Diode, Pentode
Diode-audio pentode designed especially for service as a combined diode detector and pentode audio amplifier. The diode plate is located at the negative end of the filament.
$5.90
T-1LE3_1LF3 Vacuum Tube - 1LE3 / 1LF3, Triode
Low-voltage, low-current drain, battery type triode. It is designed for service as an oscillator, detector, or amplifier in receivers using 90 volts "B" battery and a single dry cell "A" battery.
$7.90
T-1LH4 Vacuum Tube - 1LH4, Diode, Triode
Tube combining a single diode and a high-mu triode in one bulb. It is designed for service as a diode detector, AVC rectifier, and as a resistance coupled amplifier.
$4.90
T-1LN5 Vacuum Tube - 1LN5, Pentode (VT179)
Sharp-cutoff pentode designed for use as a radio-frequency, intermediate frequency, or audio-frequency amplifier in battery operated receivers.
$6.25
T-1N5GT_1P5GT Vacuum Tube - 1N5GT / 1P5GT, Pentode, Sharp Cut-Off, RF
Filamentary type sharp cut-off pentode voltage amplifier. It is designed for service in low-drain battery-operated receivers as an RF, IF, or AF amplifier.
$5.90
T-1Q5GT Vacuum Tube - 1Q5GT, Tetrode, Amplifier
Low voltage, low current drain battery type beam power output tube. It is designed for services with 90 volts of "B" battery and a single dry cell "A" battery.
$4.90
T-1R5_DK91 Vacuum Tube - 1R5 / DK91, Heptode
Miniature pentagrid-converter designed for use as a combined mixer and oscillator in superheterodyne circuits. Because of its small size and high operating efficiency, the 1R5 is especially adapted for compact, battery-operated equipment.
$5.90
Don't see what you're looking for? Send us your product suggestions!