Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.

Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-0A2_150C2 Vacuum Tube - 0A2 / 150C2, Voltage Regulator, Diode, Glow-Discharge
0A2 or 150C2 - Voltage Regulator, Diode, miniature glow-discharge type.
$6.90
T-0A3_VR75 Vacuum Tube - 0A3 / VR75, Voltage Regulator, Diode, Glow-Discharge
Voltage Regulator, Diode, Glow-Discharge type.
$6.90
T-0B2 Vacuum Tube - 0B2, Voltage Regulator, Diode, Glow-Discharge
The 0B2 is a two-electrode, inert-gas-filled cold cathode miniature tube intended for use as a voltage regulator.
$5.90
T-0Z4-A Vacuum Tube - 0Z4-A, Rectifier, Full Wave, Gas
The 0Z4A is a gas-filled, double diode employing an ionic-heated cathode. Its principal application is as a full-wave power rectifier in equipment with vibrator type power supplies.
$3.90
T-1A5GT Vacuum Tube - 1A5GT, Pentode, Power Amplifier
Filament type power-amplifier pentode designed for use in the output stage of low drain battery operated equipment. The 1A5GT may be operated singly or in push-pull combination.
$4.90
T-1H5GT-G Vacuum Tube - 1H5GT-G, Diode, Triode, High MU
Tube containing a single diode and a high-mu triode in one bulb. It is designed for service as a diode detector, AVC rectifier, and as a resistance-coupled amplifier.
$3.90
T-1LB4 Vacuum Tube - 1LB4, Pentode, Power
Low-voltage, low-current drain, battery type power pentode. It is designed for service with 90 volts of "B" battery and a single dry cell "A" battery.
$11.90
T-1LD5 Vacuum Tube - 1LD5, Diode, Pentode
Diode-audio pentode designed especially for service as a combined diode detector and pentode audio amplifier. The diode plate is located at the negative end of the filament.
$5.90
T-1LH4 Vacuum Tube - 1LH4, Diode, Triode
Tube combining a single diode and a high-mu triode in one bulb. It is designed for service as a diode detector, AVC rectifier, and as a resistance coupled amplifier.
$4.90
T-1LN5 Vacuum Tube - 1LN5, Pentode (VT179)
Sharp-cutoff pentode designed for use as a radio-frequency, intermediate frequency, or audio-frequency amplifier in battery operated receivers.
$6.25
T-1N5GT_1P5GT Vacuum Tube - 1N5GT / 1P5GT, Pentode, Sharp Cut-Off, RF
Filamentary type sharp cut-off pentode voltage amplifier. It is designed for service in low-drain battery-operated receivers as an RF, IF, or AF amplifier.
$5.90
T-1S5_DAF91 Vacuum Tube - 1S5 / DAF91, Diode, Sharp Cut-Off Pentode
Miniature tube containing a diode and a sharp-cutoff pentode. It is designed for use as a combined detector and audio-frequency voltage amplifier in compact battery-powered equipment.
$3.55
T-1T4_DF91 Vacuum Tube - 1T4 / DF91, Pentode, Remote Cut-Off
Miniature remote-cutoff pentode designed for use as a radio-frequency or intermediate frequency amplifier in compact, battery-operated equipment.
$4.90
T-1U4 Vacuum Tube - 1U4, Pentode
Miniature, filamentary, sharp-cutoff pentode intended for radio frequency or intermediate frequency amplifier use in battery-operated receivers.
$6.90
T-1U5 Vacuum Tube - 1U5, Diode, Sharp Cut-Off Pentode
Miniature diode sharp-cutoff pentode designed for use as a combined detector, audio-frequency amplifier, and automatic-volume-control tube in compact, battery-operated receivers.
$6.90
T-1V_6Z3 Vacuum Tube - 1V / 6Z3, Rectifier
Glass-type half-wave high-vacuum rectifier with an indirectly heated cathode. It is especially designed for use in a-c/d-c and automobile receivers.
$7.90
T-2-01C Vacuum Tube - 2-01C, Rectifier
Small, closely spaced, low-capacitance, high-vacuum diode designed for use through ultra-high frequencies. In measurement work, it is well suited to mounting in a probe and will maintain accuracy
$18.45
Save 50%
Originally: $36.90
T-2A5 Vacuum Tube - 2A5, Pentode, Power Amplifier
Type 2A5 is a pentode amplifier designed for application in power output stages of receivers. With the exception of heater ratings, their electrical characteristics are identical.
Starting at $11.65
Save 0%
Originally: $11.65
Partially Out of Stock
T-2A6 Vacuum Tube - 2A6, Dual Diode, Triode
Heater-cathode type duplex-diode high-mu triode designed for use as a combined detector, audio-frequency amplifier and automatic-volume-control tube. Except for heater rating the 2A6 and 75 are identical.
$7.90
T-2E26 Vacuum Tube - 2E26, Pentode, Beam
V-H-F beam power amplifier.
$6.90
T-3A4 Vacuum Tube - 3A4, Pentode, Power Amplifier
The 3A4 is designed for use in compact, lightweight, portable equipment. The relatively large filament employed in the 3A4 enables it to supply the high peak currents required in RF power applications.
$5.90
T-3Q4 Vacuum Tube - 3Q4, Pentode, Power
The type 3Q4 is a miniature type power-amplifier pentode designed for use in the output stage of battery operated equipment.
$2.95
Save 50%
Originally: $5.90
T-3S4_DL92 Vacuum Tube - 3S4 / DL92, Pentode, Power
Filamentary type power output pentode in the miniature construction. It is characterized by economy of filament power and ability to perform well at low plate supply voltages such as encountered in portable equipment.
$4.90
T-3V4_DL94 Vacuum Tube - 3V4 / DL94, Pentode, Power
Miniature power amplifier pentode designed for use in the power output stage of compact, battery operated equipment. It is particularly useful in three-way portable receivers which employ 90-volta batteries.
$8.90
Don't see what you're looking for? Send us your product suggestions!