Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-1L6 Vacuum Tube - 1L6, Heptode
Miniature type pentagrid converter designed for use in low drain battery operated receivers.
Starting at $40.65
Partially Out of Stock
T-1LA6 Vacuum Tube - 1LA6, Heptode
Low-voltage, low-current drain battery type pentagrid converter. It is designed for service as an oscillator and mixer in superheterodyne receivers which require only 90 volts of "B" battery and a single dry cell "A" battery.
T-1LB4 Vacuum Tube - 1LB4, Pentode, Power
Low-voltage, low-current drain, battery type power pentode. It is designed for service with 90 volts of "B" battery and a single dry cell "A" battery.
T-1LC6 Vacuum Tube - 1LC6, Heptode
Filament-type pentagrid converter designed particularly for use in low drain battery-operated equipment. This tube will operate satisfactorily with only 45 volts B supply.
T-1LD5 Vacuum Tube - 1LD5, Diode, Pentode
Diode-audio pentode designed especially for service as a combined diode detector and pentode audio amplifier. The diode plate is located at the negative end of the filament.
T-1LE3_1LF3 Vacuum Tube - 1LE3 / 1LF3, Triode
Low-voltage, low-current drain, battery type triode. It is designed for service as an oscillator, detector, or amplifier in receivers using 90 volts "B" battery and a single dry cell "A" battery.
T-1LH4 Vacuum Tube - 1LH4, Diode, Triode
Tube combining a single diode and a high-mu triode in one bulb. It is designed for service as a diode detector, AVC rectifier, and as a resistance coupled amplifier.
T-1LN5 Vacuum Tube - 1LN5, Pentode (VT179)
Sharp-cutoff pentode designed for use as a radio-frequency, intermediate frequency, or audio-frequency amplifier in battery operated receivers.
T-1N5GT_1P5GT Vacuum Tube - 1N5GT / 1P5GT, Pentode, Sharp Cut-Off, RF
Filamentary type sharp cut-off pentode voltage amplifier. It is designed for service in low-drain battery-operated receivers as an RF, IF, or AF amplifier.
T-1Q5GT Vacuum Tube - 1Q5GT, Tetrode, Amplifier
Low voltage, low current drain battery type beam power output tube. It is designed for services with 90 volts of "B" battery and a single dry cell "A" battery.
T-1R5_DK91 Vacuum Tube - 1R5 / DK91, Heptode
Miniature pentagrid-converter designed for use as a combined mixer and oscillator in superheterodyne circuits. Because of its small size and high operating efficiency, the 1R5 is especially adapted for compact, battery-operated equipment.
T-1S5_DAF91 Vacuum Tube - 1S5 / DAF91, Diode, Sharp Cut-Off Pentode
Miniature tube containing a diode and a sharp-cutoff pentode. It is designed for use as a combined detector and audio-frequency voltage amplifier in compact battery-powered equipment.
T-1T4_DF91 Vacuum Tube - 1T4 / DF91, Pentode, Remote Cut-Off
Miniature remote-cutoff pentode designed for use as a radio-frequency or intermediate frequency amplifier in compact, battery-operated equipment.
T-1U4 Vacuum Tube - 1U4, Pentode
Miniature, filamentary, sharp-cutoff pentode intended for radio frequency or intermediate frequency amplifier use in battery-operated receivers.
T-1U5 Vacuum Tube - 1U5, Diode, Sharp Cut-Off Pentode
Miniature diode sharp-cutoff pentode designed for use as a combined detector, audio-frequency amplifier, and automatic-volume-control tube in compact, battery-operated receivers.
T-1V_6Z3 Vacuum Tube - 1V / 6Z3, Rectifier
Glass-type half-wave high-vacuum rectifier with an indirectly heated cathode. It is especially designed for use in a-c/d-c and automobile receivers.
T-20LF6 Vacuum Tube - 20LF6, Pentode, Beam
Beam power pentode designed for use in horizontal deflection circuits of color television receivers.
T-211_VT-4C Vacuum Tube - 211 / VT-4C, Triode, Power Amplifier
New-Old-Stock (NOS) tube.
Also known by US military identifier VT-4C.
T-21JS6_23JS6 Vacuum Tube - 21JS6A/23JS6, Beam Power Amplifier
Beam Power Amplifier
T-24A Vacuum Tube - 24A, Tetrode
Screen grid R-F amplifier.
T-24JE6C_24LQ6 Vacuum Tube - 24JE6C / 24LQ6, Beam Power Amplifier
Beam-power pentode primarily designed for use as the horizontal-deflection amplifier in color television receivers. Control testing gives the assurance the 24LQ6 is capable of withstanding a 200 watt plate dissipation for 40 seconds
T-25L6 Vacuum Tube - 25L6, Beam Power Amplifier, Metal
Power-amplifier tube of the all-metal type for use in the output stage of transformerless (ac/dc) radio receivers, especially those designed to have ample reserve of power-delivering bilities.
T-25Z6GT Vacuum Tube - 25Z6GT, Dual Rectifier
Heater-cathode type full-wave high-vacuum rectifier doubler tube designed for use in the power supply of a-c or a-c/d-c receivers. Eletrically the 25Z5, 25Z6, and 25Z6GT are identical.
T-26A6 Vacuum Tube - 26A6, Pentode
R-F amplifier pentode, miniature remote-cutoff type, for use with 12-cell storage battery supply.
Don't see what you're looking for? Send us your product suggestions!