Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-6AJ5 Vacuum Tube - 6AJ5, Pentode, Sharp Cut-Off
Miniature sharp cutoff pentode designed for use where only low plate and screen voltages are available. The 6AJ5 is especially suitable for operation at high frequencies.
$6.25
T-1LN5 Vacuum Tube - 1LN5, Pentode (VT179)
Sharp-cutoff pentode designed for use as a radio-frequency, intermediate frequency, or audio-frequency amplifier in battery operated receivers.
$6.25
T-14B6 Vacuum Tube - 14B6, Dual Diode, Triode
Combined high-mu triode and double diode using the 8 pin lock-in construction. It is designed for use as a diode detector, AVC rectifier, and an impedance or resistance coupled amplifier.
$6.40
T-AZ41 Vacuum Tube - AZ41, Rectifier, Full Wave
High vacuum full wave rectifying tube.
$6.45
Save 50%
Originally: $12.90
T-5763 Vacuum Tube - 5763, Tetrode, Beam Power
Heater-cathode type transmitting beam power amplifier in the 9 pin miniature construction. It is intended for use in compact, low-power mobile transmitters and in the low-power stages of larger fixed station transmitters.
$6.45
Save 50%
Originally: $12.90
T-6SB7-Y Vacuum Tube - 6SB7-Y, Pentagrid Converter
Pentagrid metal tube designed for use as a combined mixer and oscillator in superheterodyne circuits. Especially useful in FM receiver service below 120 megacycles.
$6.65
T-0C3-A_VR105 Vacuum Tube - 0C3-A / VR105, Voltage Regulator
The 0C3-A is a two-element gas filled, cold cathode voltage regulator. It is designed to provide a regulated output of approximately 105 volts.
$6.90
T-6ES8_ECC189 Vacuum Tube - 6ES8 / ECC189, Dual Triode, Remote Cut-Off
Semi-remote cutoff double triode designed for use as a cascode VHF amplifier. It features extremely high gm, low capacitance, and low noise.
$6.90
T-6CW5_EL86 Vacuum Tube - 6CW5 / EL86, Pentode, Power Amplifier
The 6CW5 is an A.F. output pentode in the 9 pin miniature construction. It is intended for use in single-ended push-pull output stages.
$6.90
T-6J7_EF36 Vacuum Tube - 6J7 / EF36, Pentode, Sharp Cut-Off
Sharp cut-off general purpose amplifier. With the exception of heater and capacitance ratings, the electrical characteristics are similar to those of the 6C6.
$6.90
Out of Stock
T-10BQ5 Vacuum Tube - 10BQ5, Beam Power Amplifier, output pentode
The 10BQ5 is an output pentode designed for application in medium power hi-fi amplifiers. A pair of tubes in class AB, push-pull conventional operation yields an output of up to 17 watts at 4% distortion (without feedback).
$6.90
T-12B7_14A7 Vacuum Tube - 12B7 / 14A7, Pentode, Remote Cut-Off
Pentode type amplifier tube with remote cutoff characteristics designed for use as a high frequency amplifier in radio receivers.
$6.90
T-13EM7_15EA7 Vacuum Tube - 13EM7 / 15EA7, Triode, Dissimilar Double
Dissimilar double-triode designed for use as a combined vertical deflection oscillator and amplifier in television receivers
$6.90
T-12SL7GT Vacuum Tube - 12SL7GT, Triode, Dual, HI-MU
High-mu twin triode designed for use in resistance-coupled circuits as a voltage amplifier or phase inverter. Except for heater characteristics and ratings, the 12SL7GT is identical to the 6SL7GT.
$6.90
T-6SS7 Vacuum Tube - 6SS7, Pentode, Remote Cut-Off
The 6SS7 is an RF pentode which as remote plate current cutoff. It is suitable for operating with AVC in Rf and IF amplifiers. The use of this tube will reduce cross modulation effects.
$6.90
T-6SJ7 Vacuum Tube - 6SJ7, Pentode, Sharp Cut-Off
Metal sharp-cutoff pentode designed for use as a biased detector or high-gain amplifier.
$6.90
T-6SQ7 Vacuum Tube - 6SQ7, Diode, Dual Triode
Metal duplex-diode high-mu triode. It is intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers.
$6.90
T-6DR7 Vacuum Tube - 6DR7, Triode, Dissimilar Double
Double triode with dissimilar section in the 9 pin miniature construction. Section #1 has a high mu and is intended for use as a vertical deflection oscillator. Section #2 has a low mu and is designed for use as a vertical deflection amplifier
$6.90
T-6SK7 Vacuum Tube - 6SK7, Pentode, Remote Cut-Off, RF
Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
$6.90
T-7H7 Vacuum Tube - 7H7, Pentode
Semi-remote cutoff pentode using the lock in construction. IT is designed for use as an RF or IF amplifier.
$6.90
T-1U4 Vacuum Tube - 1U4, Pentode
Miniature, filamentary, sharp-cutoff pentode intended for radio frequency or intermediate frequency amplifier use in battery-operated receivers.
$6.90
T-2E26 Vacuum Tube - 2E26, Pentode, Beam
V-H-F beam power amplifier.
$6.90
T-6AL7GT Vacuum Tube - 6AL7GT, Indicator
The 6AL7GT is an electron-ray indicator designed especially for use in AM-FM receivers. Through its use, precise tuning of either FM or AM signals is easily accomplished without the use of additional tubes or circuit components.
$6.90
T-6F5_H63 Vacuum Tube - 6F5 / H63, Triode
General purpose high-mu triode. It is designed for service as a high gain resistance coupled amplifier in AC and AC - DC operated receivers.
$6.90
Don't see what you're looking for? Send us your product suggestions!