Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-6BC8_6BZ8 Vacuum Tube - 6BC8 / 6BZ8, Dual Triode
Miniature, medium-mu, semi-remote cutoff twin triode intended for application as a VHF cascode amplifier in a television receiver.
$5.90
T-6BH6_E90F Vacuum Tube - 6BH6 / E90F, Pentode, Sharp Cut-Off
Miniature sharp-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include low grid-plate capacitance, relatively high transconductance, and low heater current.
$5.90
T-6Q7 Vacuum Tube - 6Q7, Dual Diode, Triode
Combines two diodes and a high-mu triode using a common cathode. It is designed for service as a diode detector, AVC rectifier, and as a high gain resistance coupled amplifier in AC, storage battery, and AC - DC operated receivers.
$5.90
T-6SK7GT Vacuum Tube - 6SK7GT, Pentode, Remote Cut-Off, RF
Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
$5.90
T-6SQ7GT Vacuum Tube - 6SQ7GT, Diode, Dual Triode
Duplex-diode high-mu triode intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers. The triode section incorporates a high amplification factor
$5.90
T-6Y6GT Vacuum Tube - 6Y6GT, Beam Power Amplifier
Beam power pentode primarily intended for use as an audio frequency power amplifier. It is particularly useful in applications where the available supply voltage is relatively low.
$5.90
T-12AL8 Vacuum Tube - 12AL8, Triode, Tetrode
Power tetrode, medium-mu 9-pin miniature for use in automobile radio receivers operated directly from 12-volt storage batteries.
$5.90
T-12J5GT Vacuum Tube - 12J5GT, Triode, Medium-MU
General purpose medium-mu triode. It is useful for service as an oscillator or audio-frequency amplifier.
$5.90
T-12K7GT Vacuum Tube - 12K7GT, Pentode, Remote Cut-Off
Variable-mu pentode amplifier in the octal glass construction. It is suitable for use with AVC in RF and IF amplifier and minimizes cross modulation.
$5.90
T-12SC7 Vacuum Tube - 12SC7, Dual Triode, HI-MU
The type 12SC7 is a twin-triode amplifier designed for use as an audio amplifier or phase inverter. Special shielding arrangement in the base permits operation at a low hum level.
$5.90
T-14N7 Vacuum Tube - 14N7, Dual Triode
Combines two low-mu triodes in the lock-in construction. It is designed for use either as a phase inverter or as a voltage amplifier.
$5.90
T-14Q7 Vacuum Tube - 14Q7, Heptode
Pentagrid converter designed for use as a combined oscillator and mixer in superheterodyne receiver. The electrical characteristics of the 14Q7 are similar to those of the 12SA7
$5.90
T-1LD5 Vacuum Tube - 1LD5, Diode, Pentode
Diode-audio pentode designed especially for service as a combined diode detector and pentode audio amplifier. The diode plate is located at the negative end of the filament.
$5.90
T-1N5GT_1P5GT Vacuum Tube - 1N5GT / 1P5GT, Pentode, Sharp Cut-Off, RF
Filamentary type sharp cut-off pentode voltage amplifier. It is designed for service in low-drain battery-operated receivers as an RF, IF, or AF amplifier.
$5.90
T-1R5_DK91 Vacuum Tube - 1R5 / DK91, Heptode
Miniature pentagrid-converter designed for use as a combined mixer and oscillator in superheterodyne circuits. Because of its small size and high operating efficiency, the 1R5 is especially adapted for compact, battery-operated equipment.
$5.90
T-25Z6GT Vacuum Tube - 25Z6GT, Dual Rectifier
Heater-cathode type full-wave high-vacuum rectifier doubler tube designed for use in the power supply of a-c or a-c/d-c receivers. Eletrically the 25Z5, 25Z6, and 25Z6GT are identical.
$5.90
T-26A6 Vacuum Tube - 26A6, Pentode
R-F amplifier pentode, miniature remote-cutoff type, for use with 12-cell storage battery supply.
$5.90
T-35Z3 Vacuum Tube - 35Z3, Rectifier, Half Wave
Half-wave high-vacuum rectifier designed for use in a-c/d-c receivers. Electrically the 35Z3 is equivalent to the 35Z5GT except that the heater of the 35Z3 is not tapped for operation of a panel lamp.
$5.90
T-3A4 Vacuum Tube - 3A4, Pentode, Power Amplifier
The 3A4 is designed for use in compact, lightweight, portable equipment. The relatively large filament employed in the 3A4 enables it to supply the high peak currents required in RF power applications.
$5.90
T-3A5_DCC90 Vacuum Tube - 3A5 / DCC90, Dual Triode
The 3A5 is intended for use in high frequency applications. The relatively large filament employed in the 3A5 enables it to supply the high peak currents required in RF power applications.
$5.90
T-50BM8_UCL82 Vacuum Tube - 50BM8 / UCL82, Triode, Pentode, Power
Miniature type triode-pentode designed for use as an AF amplifier by triode section and AF power amplifier by pentode section in radio receivers.
$5.90
T-50EH5 Vacuum Tube - 50EH5, Pentode, Power Amplifier
Miniature power pentode primarily designed for use in the audio-frequency power output stage of radio receivers and phonographs. The tube features high power sensitivity at low plate and screen voltages.
$5.90
T-6BZ6_6JH6 Vacuum Tube - 6BZ6 / 6JH6, Pentode, Semi-Remote Cut-Off
Miniature semi-remote-cutoff pentode designed primarily for use as an intermediate frequency amplifier in television receivers.
$5.90
T-6FD7 Vacuum Tube - 6FD7, Dual Triode, Dissimilar
Dissimilar section double triode intended to serve the combined functions of the vertical deflection oscillator and amplifier. It features the T-9 bulb with integral wafer base which fits the standard 9 pin miniature socket.
$5.90
Don't see what you're looking for? Send us your product suggestions!