Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-6973-EH-X Vacuum Tube - 6973, Electro-Harmonix
Electro-Harmonix 6973 Power Tube Beam power amplifier used in vintage Gretsch and Magnatone amplifiers. This is a real 6973, not a rebrand of a "close" tube.
Starting at $21.15
T-6V6GT-MUL Vacuum Tube - 6V6GT, Mullard Reissue
Mullard 6V6GT tube. Made in Russia. This valve is built to stand the high voltages encountered in the Fender Deluxe Reverb and other guitar amplifiers that ran the valves above the published specification. The smooth and balanced frequency response also makes it suitable for hi-fi use.
Starting at $28.50
T-12AX7EH-3 Vacuum Tube - 12AX7 / ECC83, Electro-Harmonix, package of 3
Package of 3
This Russian tube is full bodied and bright with a more straightforward presentation. It packs a lot of bite with its higher-than-normal gain. In overdrive, it offers a lot of crunchy fizz.
T-12DW7_7247-GE Vacuum Tube - 12DW7 / 7247, Dual Triode, GE
Dissimilar double triode in the 9-pin miniature construction. It is especially suitable for applications requiring a high gain voltage amplifier and a cathodyne type phase-inverter.
T-EL34M-MP-GT Vacuum Tube - EL34, Groove Tubes, Matched Pair
Package of 2
Octal power tube (Max Plate Watts = 25W) The GT EL34 is based on the original Mullard® EL34 of the '60s - the stock tube in all early Marshall® and Hiwatt® amps. Mullard produced it for about 15 years, and this is a faithful reproduction of the classic XF2 dual-getter version. It has a big, fat and well-defined tone and really “wakes up" reissue amps to perform like the originals. As close as you can get to vintage Marshall® power tube heaven.
T-6BC8_6BZ8 Vacuum Tube - 6BC8 / 6BZ8, Dual Triode
Miniature, medium-mu, semi-remote cutoff twin triode intended for application as a VHF cascode amplifier in a television receiver.
Out of Stock
T-6GH8A Vacuum Tube - 6GH8A, Triode, Pentode
Miniature tube which contains a sharp-cutoff pentode and a medium-mu triode. Each section has a separate cathode and is electrically independent.
T-1T4_DF91 Vacuum Tube - 1T4 / DF91, Pentode, Remote Cut-Off
Miniature remote-cutoff pentode designed for use as a radio-frequency or intermediate frequency amplifier in compact, battery-operated equipment.
T-6AK5_EF95 Vacuum Tube - 6AK5 / EF95, Pentode, Sharp Cut-Off
Miniature types used as rf or if amplifiers especially in high-frequency wide-band applications at frequencies up to 400MHz.
T-7025-S-TAD Vacuum Tube - 7025 S, Tube Amp Doctor, Premium Selected
The vintage made in England Mullard ECC83 has been accurately recreated in the Tube Amp Doctor 7025 S. This highly sought after tube is regarded by many as the best dual triode to have ever been created for audio use. TAD offers a reliable and affordable way to experience the sound of this legendary tube.
The 7025 S is notable for its rich and complex harmonics. The warmth in the midrange of this tube stands out among similar preamp tubes. The TAD 7025 has nice round clean tones as well as a creamy yet articulate overdrive. Its rugged mechanical construction with extra thick mica spacers along with TAD’s premium selection process ensures a highly reliable preamp tube. Tube Amp Doctor especially recommends the 7025 S for use in British and British style amplifiers.
The Tube Amp Doctor 7025 works in any 7025, 12AX7, or ECC83 position.
T-12AZ7A Vacuum Tube - 12AZ7A, Triode, Dual
9-pin miniature type high-mu twin triode, with heater having controlled warm-up time.
T-6K6GT Vacuum Tube - 6K6GT, Pentode, Power Amplifier
The 6K6GT is an indirectly heated cathode type power amplifier pentode designed for service in the output stages of AC, AC/DC and storage battery operated receivers.
T-7868-EH Vacuum Tube - 7868, Electro-Harmonix
Electro-Harmonix 7868 power pentode tube with a magnoval style base. Made in Russia.
Starting at $30.75
T-6J5 Vacuum Tube - 6J5, Triode, Medium-MU
General-purpose triode designed for use as a detector, amplifier, or oscillator. Features include a relatively high transconductance and a medium amplification factor.
T-6X5GT_EZ35 Vacuum Tube - 6X5GT / EZ35, Rectifier, Full Wave
Cathode type rectifier designed particularly for use in automobile receivers.
T-50C5 Vacuum Tube - 50C5, Beam Power Amplifier
Miniature beam pentode primarily designed for use in the audio-frequency power-output stage of radio receivers. The tube features high power sensitivity and high efficiency at relatively low plate and screen voltages
T-6N1-P-SOVT Vacuum Tube - 6N1-P, Sovtek
Sovtek 6N1P dual triode preamp tube. Made in Russia.
The 6H1P double triode has been designed for low-frequency voltage amplification.
T-6414W Vacuum Tube - 6414, Triode, Dual
Heater-cathode type, medium-mu double triode of miniature construction. This type is characterized by long life and stable performance. Features a high zero-bias plate current, a sharp cutoff characteristic, and separate cathode connections.
T-6AC10 Vacuum Tube - 6AC10, Triple Triode
Compactron containing three high-mu triodes. It is designed for use primarily as a color-difference amplifier in color television receivers.
T-12AX7WB-SOVT Vacuum Tube - 12AX7WB, Sovtek
Sovtek 12AX7WB dual triode.
T-1S5_DAF91 Vacuum Tube - 1S5 / DAF91, Diode, Sharp Cut-Off Pentode
Miniature tube containing a diode and a sharp-cutoff pentode. It is designed for use as a combined detector and audio-frequency voltage amplifier in compact battery-powered equipment.
T-6AJ8_ECH81 Vacuum Tube - 6AJ8 / ECH81, Triode, Heptode
Triode-heptode for use in F.M., AM/FM, A.M, and television receivers.
T-ECC823-JJ Vacuum Tube - ECC823, JJ Electronics, Dual Triode
In the ECC823, Section 1 of the tube (pins 6, 7, and 8) is the low gain 12AU7/ECC82 spec (gain factor 17) and Section 2 (pins 1, 2, and 3) is the high gain 12AX7/ECC83 spec (gain factor 100).
T-12SQ7 Vacuum Tube - 12SQ7, Diode, Dual, Triode
Combines two diode units and a high-mu triode in a single envelope. Each section uses a common cathode. It is intended for service as a combined detector, AVC source, and high gain audio amplifier.
Don't see what you're looking for? Send us your product suggestions!