Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.

New Old Stock (NOS)

Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
T-12B4A Vacuum Tube - 12B4A, Triode, Low MU
Miniature low-mu triode designed primarily for service as a vertical-deflection amplifier in television receivers. The tube features high plate current at relatively low plate voltages
$5.90
T-6L7G Vacuum Tube - 6L7G, Pentagrid Mixer
Mixer tube designed for service with a separate oscillator as the first detector in superheterodyne receivers. The control grid is of the remote cut-off type which allows the use of AVC and minimizes cross-modulation.
$5.90
T-6AX5GT Vacuum Tube - 6AX5GT, Rectifier, Full Wave
Full-wave rectifier of the heater-cathode type intended for use in AC operated and automobile receivers. Because of its heater-cathode construction it has the same heating time as that of other heater-cathode types in the receiver.
$5.90
T-6SK7GT Vacuum Tube - 6SK7GT, Pentode, Remote Cut-Off, RF
Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
$5.90
T-12SC7 Vacuum Tube - 12SC7, Dual Triode, HI-MU
The type 12SC7 is a twin-triode amplifier designed for use as an audio amplifier or phase inverter. Special shielding arrangement in the base permits operation at a low hum level.
$5.90
T-12AU6 Vacuum Tube - 12AU6, Pentode, Sharp Cut-Off
The 12AU6 is a pentode amplifier having a sharp cut-off control characteristic using the miniature construction. With high transconductance, low grid-plate capacitance, it is intended for service as either an RF or AF amplifier.
$5.90
T-25Z5 Vacuum Tube - 25Z5, Rectifier, Dual, ST Glass
Heater-cathode type full-wave high-vacuum rectifier doubler tube designed for use in the power supply of a-c or a-c/d-c receivers. Eletrically the 25Z5, 25Z6, and 25Z6GT are identical.
$5.90
T-8SN7GTB Vacuum Tube - 8SN7GTB, Dual Triode
Medium-mu triode intended for use as a combined vertical oscillator and vertical deflection amplifier in 450 mA. series heater operated television receivers.
$5.90
Out of Stock
T-14N7 Vacuum Tube - 14N7, Dual Triode
Combines two low-mu triodes in the lock-in construction. It is designed for use either as a phase inverter or as a voltage amplifier.
$5.90
T-0B2 Vacuum Tube - 0B2, Voltage Regulator, Diode, Glow-Discharge
The 0B2 is a two-electrode, inert-gas-filled cold cathode miniature tube intended for use as a voltage regulator.
$5.90
T-7A7 Vacuum Tube - 7A7, Pentode, Remote Cut-Off
Pentode voltage amplifier using the lock-in construction. It is designed for RF or IF service in AC/DC receivers.
$5.90
T-6J11 Vacuum Tube - 6J11, Dual Pentode
Compactron device containing two sharp cutoff pentodes, designed primarily for intermediate-frequency amplifier service in television receivers.
$5.90
T-12AV6 Vacuum Tube - 12AV6, Diode, Dual Triode
Combines a high mu triode and two independent diode units in the 7-pin miniature construction. It permits a single tube to function as detector, AVC rectifier, and audio amplifier.
$5.90
T-12SA7GT Vacuum Tube - 12SA7GT, Pentagrid Converter
Pentagrid converter designed to minimize frequency drift. They are intended for service as combined oscillators and mixers in AC, storage battery, and AC/DC operated superheterodynes.
$5.90
T-12J5GT Vacuum Tube - 12J5GT, Triode, Medium-MU
General purpose medium-mu triode. It is useful for service as an oscillator or audio-frequency amplifier.
$5.90
T-26A6 Vacuum Tube - 26A6, Pentode
R-F amplifier pentode, miniature remote-cutoff type, for use with 12-cell storage battery supply.
$5.90
T-6FD7 Vacuum Tube - 6FD7, Dual Triode, Dissimilar
Dissimilar section double triode intended to serve the combined functions of the vertical deflection oscillator and amplifier. It features the T-9 bulb with integral wafer base which fits the standard 9 pin miniature socket.
$5.90
T-6Y6G Vacuum Tube - 6Y6G, Tetrode, Beam Power
Beam power amplifier having high power sensitivity and high power output at comparatively low DC supply voltages.
$5.90
T-50EH5 Vacuum Tube - 50EH5, Pentode, Power Amplifier
Miniature power pentode primarily designed for use in the audio-frequency power output stage of radio receivers and phonographs. The tube features high power sensitivity at low plate and screen voltages.
$5.90
T-3A4 Vacuum Tube - 3A4, Pentode, Power Amplifier
The 3A4 is designed for use in compact, lightweight, portable equipment. The relatively large filament employed in the 3A4 enables it to supply the high peak currents required in RF power applications.
$5.90
T-6BZ6_6JH6 Vacuum Tube - 6BZ6 / 6JH6, Pentode, Semi-Remote Cut-Off
Miniature semi-remote-cutoff pentode designed primarily for use as an intermediate frequency amplifier in television receivers.
$5.90
T-12AB5 Vacuum Tube - 12AB5, Tetrode, Beam Power
Beam power tube of the 9-pin miniature type designed for use as the output amplifier in automobile radio receivers operating from a 12-volt storage battery. The 12AB5 can provide high power output.
$5.90
T-6L7 Vacuum Tube - 6L7, Heptode
Mixer tube designed for service with a separate oscillator as the first detector in superheterodyne receivers. The control grid is of the remote cut-off type which allows the use of AVC and minimizes cross-modulation.
$5.90
T-77 Vacuum Tube - 77, Pentode, Sharp Cut-Off
Triple grid general purpose detector amplifier.
$5.90
Don't see what you're looking for? Send us your product suggestions!