Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
The Tube Amp Doctor KT-66 is an incredible remake of the classic British tube. With its large glass envelope contoured by smooth curves tapering into a rounded brown base, the TAD KT-66 not only looks like the original, it performs like the original. This KT66 offers plenty of headroom for a thick full bodied sound with smooth yet articulate highs. The KT-66 is famously used in vintage British plexi amps and makes a great replacement for that style of amplifier and many others. The TAD KT66 is matched for both plate current and transconductance and passes all of the tests of the TAD Premium Selection process. The TAD KT-66 can be used in any KT-66 position as well as 6L6GC and 5881 amps that can supply the required 1.27A for the heater.
Starting at $32.40
The 6AL5 combines two independent diode units in the 7 pin miniature construction. Its high perveance permits high efficiency in either FM or AM detector service.
$4.90
Premium directly heated heavy duty rectifier Diode. Re-issue of the most popular rectifier valve ever built by Mullard. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied.
- Low internal voltage drop & controlled heater warm up time
- Excellent choice for both Hifi and instrument amplification
- Replacement/upgrade for all 5AR4/GZ34 types
$39.50
Mullard 6V6GT tube. Made in Russia. This valve is built to stand the high voltages encountered in the Fender Deluxe Reverb and other guitar amplifiers that ran the valves above the published specification. The smooth and balanced frequency response also makes it suitable for hi-fi use.
Starting at $28.50
Combines two diode units and a high-mu triode in a single envelope. Each section uses a common cathode. It is intended for service as a combined detector, AVC source, and high gain audio amplifier.
$19.90
Heater-cathode type diode designed for use as a half-wave rectifier in ac/dc receivers. A heater tap is provided to permit operation with a panel lamp.
$23.90
Cathode type rectifier designed particularly for use in automobile receivers.
$12.90
The Perfect Choice for Stereo Audio Applications - Ideal as a Balanced Driver. Latest revision providing great musical performance and rich tone. This TAD 12AU7A / ECC82 has especially strong systems which are selected to provide two symmetric triodes. The perfect choice for stereo audio applications and ideal as a balanced driver.
$17.82
Miniature, medium-mu triode suitable for use in a wide variety of general purpose applications. It is especially useful as a local oscillator in high-frequency and very-high-frequency receiver circuits.
$6.90
Electro-Harmonix 6CG7 dual triode preamp tube. Made in Russia.
$19.50
High frequency twin triode preamplifier tube used in studio and hi-fi equipment.
Starting at $16.75
Package of 3
This Russian tube is full bodied and bright with a more straightforward presentation. It packs a lot of bite with its higher-than-normal gain. In overdrive, it offers a lot of crunchy fizz.
$39.75
The JJ Electronic 6SN7 is the classic double triode with a rugged construction the offers the high reliability that JJ is known for. The JJ 6SN7 features the outstanding linearity and sound of the original tubes. This tube is an excellent replacement for Hi-Fi amplifiers and preamps and will replace any 6SN7, 6SN7GTA, 6SN7GTB, or 6SN7GT.
$16.50
The Tube Amp Doctor EF86 / 6267 is a low noise and low microphonic version of the vintage pentode. These tubes were famously used in classic HiFi equipment and microphone preamps. The original Vox® AC15 circuit also used an EF86 and now, thanks to its recent availability, there are plenty of options for guitar amplifiers utilizing this unique tube. The TAD EF86 / 6267 meets all of the standards of the Tube Amp Doctor Premium Selection process. This tube has a rugged construction featuring an aesthetically pleasing perforated shield. The TAD EF86 / 6267 will work in and EF86 or 6267 position.
$23.40
The 6K6GT is an indirectly heated cathode type power amplifier pentode designed for service in the output stages of AC, AC/DC and storage battery operated receivers.
$11.90
Electro-Harmonix 7868 power pentode tube with “novar” base. Made in Russia.
Starting at $30.75
The 12AU6 is a pentode amplifier having a sharp cut-off control characteristic using the miniature construction. With high transconductance, low grid-plate capacitance, it is intended for service as either an RF or AF amplifier.
$5.90
The Tube Amp Doctor Blackplate series offers the highest tube performance due to the stable heat dissipation of the black anode. This results in an increased tube-life and tones that rival the classic NOS tubes.
Starting at $23.40
Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
$6.90
Tung Sol 12AU7W / 6189 dual triode preamp tube. Made in Russia.
$20.95
Electro-Harmonix EF86 pentode preamp tube. Made in Russia.
$18.95
The 6K7G is an indirectly heated pentode of the vari-mu (remote cut-off) type for use in the RF or IF stages of radio equipment.
$3.13
Save 50%
Originally: $6.25