The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 7408 / 6V6GT, Beam Power Amplifier
Beam power pentode primarily designed for use in audio frequency power amplifier applications. The tube is a direct replacement for the 6V6Gt, but features additional controlled zero-bias characteristics.
Vacuum Tube - 809, Triode, Power Amplifier
Vacuum Tube - 81, Rectifier, ST Glass
Half-wave high-vacuum rectifier which may be used with either choke or condenser input to the filter.
Vacuum Tube - 8233 / E55L, Pentode, Power Amplifier
Special quality pentode designed for use as a wide band output tube.
Out of Stock
Vacuum Tube - 841, Triode, Power Amplifier
The 841 is an RF power amplifier, oscillator, and AF voltage amplifier.
Vacuum Tube - 8950, Pentode, Power Amplifier
Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.
Vacuum Tube - 8SN7GTB, Dual Triode
Medium-mu triode intended for use as a combined vertical oscillator and vertical deflection amplifier in 450 mA. series heater operated television receivers.
Out of Stock
Vacuum Tube - EL84 / 6BQ5, Amperex Bugle Boy, Pentode, Power
Amperex Bugle Boy, Pentode, Power
Vacuum Tube - EL84 / 6BQ5, Mullard, Pentode, Power
The EL84 is an output pentode rated for 12W anode dissipation, primarily intended for use in a.c. mains operated equipment.
Vacuum Tube - EL84 / 6BQ5, Telefunken, Pentode, Power
Telefunken, Pentode, Power
Out of Stock
Vacuum Tube - UM80, Indicator, Electron Ray
Tuning indicator for AM receivers
Vacuum Tube - 6FH5, Triode, HF
Neutrode triode tuner in the 7 pin miniature construction. It is designed for use in grounded cathode RF amplifiers, with the neutrode construction providing a lower grid to plate capacitance with consequent ease of neutralization.
Vacuum Tube - C1K / 6014, Thyratron
Compact, quick heating thyratron designed for timing and control applications. It is xenon filled for quick starting and the ability to operate within very wide temperature limits.
Vacuum Tube - 7189, Pentode, Beam
New Old-Stock (N.O.S.) tube. The 7189 is a power-amplifier pentode designed for use in the audio-frequency power output stage of television and radio receivers and high-fidelity amplifiers.
Vacuum Tube - 930, Photocell, Sound
New Old-Stock (N.O.S.) tube. The 930 is a gas phototube sensitive to red through infrared light.
Vacuum Tube - 25CD6G, Beam Pentode
New Old Stock (N.O.S.) tube. 25CD6GB is identical to the 6CD6GA except with different heater ratings. Beam power tube, octal base.
Vacuum Tube - 6W5-G, Rectifier, Full Wave
New Old Stock 6W5-G. Full-wave high-vacuum rectifier.
6M11 - Triode, Dual - Pentode
New-Old-Stock (NOS) tube. Compactron twin-triode pentode.
Vacuum Tube - 12AX7B, China
9 pin miniature preamp tube (Amplification Factor = 100). The Chinese 12AX7B is very similar in tone to its standard Chinese cousin, but the Bs seem to average in at slightly lower gain and noise.
Vacuum Tube - 5751, JJ Electronics
A dual triode that can be used in place of most 12AX7 circuits. The rugged build of this tube and reduced gain (30% less than a 12AX7) can improve headroom and give better control in high gain stages allowing users to more easily dial in sweet spots. The JJ 5751 features a smooth and balanced tone and a detailed response with low noise and low microphonics.
Vacuum Tube - E83CC Frame Grid, JJ Electronics
Alternative to the 12AX7 or ECC83. The JJ Electronic E83CC is a high quality dual triode that rivals the NOS version of this tube. The E83CC was originally designed as an audio specific dual triode with very low noise and microphonics. The JJ E83CC stays true to the original design with the signature thick frame grid and boxed plate. The rigid frame allows for tighter tolerances and closer construction which results in lower noise and increased stability. The JJ Electronic E83CC is a great choice for high fidelity amplifiers as well as guitar amps and studio equipment. The E83CC has the same pinout and amplification factor as a standard 12AX7 and can be used in any 12AX7 or ECC83 position. Guitarist Description: This frame grid tube has an incredibly rich yet balanced tone. The E83CC works well for clean sounds but also breaks up with a satisfying warmth and plenty of articulation.