Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-6L6 Vacuum Tube - 6L6, Tetrode, Beam Power, Metal
The 6L6 is designed with high power sensitivity and high efficiency for service in the output stages of AC receivers. They are capable of delivering an output at all power levels with a very low percentage of harmonic distortion.
T-6MJ6 Vacuum Tube - 6MJ6, Beam Power Pentode
Novar type beam power tube used as a horizontal-deflection amplifier in color and black-and-white television receivers.
T-6T7G Vacuum Tube - 6T7G, Dual Diode, Triode
The 6SS7GT is an RF pentode which as remote plate current cutoff. It is suitable for operating with AVC in Rf and IF amplifiers. The use of this tube will reduce cross modulation effects.
T-6W5-G Vacuum Tube - 6W5-G, Rectifier, Full Wave
New Old Stock 6W5-G. Full-wave high-vacuum rectifier.
T-6X5G Vacuum Tube - 6X5G, Rectifier, Full Wave
The 6X5G is an indirectly heated full-wave rectifiers for use in equipment where the current drain does not exceed 70 mA.
Out of Stock
T-7027-A Vacuum Tube - 7027-A, Tetrode, Beam Power
Beam power tube for high-fidelity audio-amplifier applications.
T-7119_E182CC Vacuum Tube - 7119 / E182CC, Dual Triode
The 7119 i a special quality double triode designed for use in computer circuits.
Out of Stock
T-7308_E188CC Vacuum Tube - 7308 / E188CC, Dual Triode
Special quality double triode designed for use as cascode amplifier, cathode follower, etc. in RF and AF circuits.
T-7408_6V6GT Vacuum Tube - 7408 / 6V6GT, Beam Power Amplifier
Beam power pentode primarily designed for use in audio frequency power amplifier applications. The tube is a direct replacement for the 6V6Gt, but features additional controlled zero-bias characteristics.
T-7534_E130L Vacuum Tube - 7534 / E130L, Pentode
Special quality tube designed for use as a wide band amplifier, cathode follower, series regulator tube for stabilized DC supply and output tube.
Out of Stock
T-7581A_KT66 Vacuum Tube - 7581A / KT66, Beam Power Amplifier
Beam-power pentode primarily designed for use in audio-frequency power-amplifier applications. The 7581A is unilaterally interchangeable with the 7581 and the 6L6GC.
T-7DJ8_PCC88 Vacuum Tube - 7DJ8 / PCC88, Dual Triode
Double triode with high transconductance and low noise for use as a cascode amplifier in tuners for television receivers.
T-801-A Vacuum Tube - 801-A, Triode, Power Amplifier
The 801A is an RF power amplifier, AF power amplifier, and modulator
Out of Stock
T-809 Vacuum Tube - 809, Triode, Power Amplifier
Transmitting triode
T-826 Vacuum Tube - 826, Triode, Power Amplifier
Transmitting triode for operation at maximum ratings up to 250 Mc.
T-829B_3E29 Vacuum Tube - 829B / 3E29, Dual Tetrode, Beam Power
Twin beam power tube
T-832A Vacuum Tube - 832A, Dual Tetrode, Beam Power
Push-pull RF beam power amplifier
T-8SN7GTB Vacuum Tube - 8SN7GTB, Dual Triode
Medium-mu triode intended for use as a combined vertical oscillator and vertical deflection amplifier in 450 mA. series heater operated television receivers.
T-930 Vacuum Tube - 930, Photocell, Sound
New Old-Stock (N.O.S.) tube. The 930 is a gas phototube sensitive to red through infrared light.
T-5751-JJ Vacuum Tube - 5751, JJ Electronics
A dual triode that can be used in place of most 12AX7 circuits. The rugged build of this tube and reduced gain (30% less than a 12AX7) can improve headroom and give better control in high gain stages allowing users to more easily dial in sweet spots. The JJ 5751 features a smooth and balanced tone and a detailed response with low noise and low microphonics.
T-E83CC-JJ Vacuum Tube - E83CC Frame Grid, JJ Electronics
Alternative to the 12AX7 or ECC83. The JJ Electronic E83CC is a high quality dual triode that rivals the NOS version of this tube. The E83CC was originally designed as an audio specific dual triode with very low noise and microphonics. The JJ E83CC stays true to the original design with the signature thick frame grid and boxed plate. The rigid frame allows for tighter tolerances and closer construction which results in lower noise and increased stability. The JJ Electronic E83CC is a great choice for high fidelity amplifiers as well as guitar amps and studio equipment. The E83CC has the same pinout and amplification factor as a standard 12AX7 and can be used in any 12AX7 or ECC83 position. Guitarist Description: This frame grid tube has an incredibly rich yet balanced tone. The E83CC works well for clean sounds but also breaks up with a satisfying warmth and plenty of articulation.
Don't see what you're looking for? Send us your product suggestions!