Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Sharp cut-off amplifier pentode designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. The 6SH7 is not recommended for use as a high-gain audio amplifier because undesirable hum may be encountered.
$4.90
Sharp cutoff pentode of the 7 pin miniature type with heater having controlled warm-up time.
$39.90
Miniature type triode-pentode designed for use as an AF amplifier by triode section and AF power amplifier by pentode section in radio receivers.
$5.90
Triode intende for use as a grounded grid UHF amplifier for bands IV and V.
$7.90
The Psvane 12BH7 is a high quality, medium gain, dual triode with a noval base. With 3.5W plate dissipation per triode, the Psvane 12BH7 is an excellent driver tube and works well in any 12BH7 position. The Psvane Classic Series is focused on the reproduction of popular vacuum tubes found in classic audio equipment. When designing the Classic Series, Psvane collected the most sought-after NOS tubes and analyzed each element of their construction, incorporating the most effective manufacturing techniques to produce stable tubes with excellent sound. Whether used in guitar amplifiers or hifi stereo systems, the Psvane Classic Series vacuum tubes excel in all applications. Psvane has been producing high quality vacuum tubes since 2011. The Psvane team originally formed in Shuguang’s high-end tube division but eventually split off to form their own brand.
$26.95
Miniature duplex-diode medium-mu triode in which separate cathode and plate connections are provided for each diode section. The tube is intended primarily as a combined synchronous detector and chrominance amplifier in color television receivers.
$6.90
Beam-power pentode designed for use in the audio frequency power output stage of television and radio receivers. Capable of supply high power output with high sensitivity, high efficiency, and low third and higher-order harmonic distortion.
$34.90
A medium gain dual triode built with the quality and reliability that we’ve come to expect from a JJ tube. This 12AU7 offers smooth tones and clear definition which is why it’s no surprise that this tube is often found in hifi equipment as well as guitar amplifiers.
Starting at $19.85
The 6L6G is designed with high power sensitivity and high efficiency for service in the output stages of AC receivers. They are capable of delivering an output at all power levels with a very low percentage of harmonic distortion.
$59.60
Miniature heptode primarily intended to perform the combined functions of mixer and oscillator in automobile radio receivers. Specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.
$3.90
The Sovtek 5881WXT is the same as the 5881 but with a full size base for easy installation in vintage amp designs. The Sovtek 5881 delivers a warm, round tone that "sweetens" any vintage or modern guitar amp design. Built to rigid military standards, the 5881 will tolerate higher voltages than any other 6L6. In fact, they're frequently used as replacements for the old 7027 model in vintage Ampegs. Extremely consistent from piece to piece. The Sovtek 5881 has a heater voltage of 6.3 volts at 0.88 amperes.
Starting at $41.70
Russian Tung-Sol 6EU7 tube. High-Mu twin triode with 9 pin miniature base. Made in Russia.
$37.60
Heater-cathode type duplex-diode high-mu triode designed for use as a combined detector, audio-frequency amplifier and automatic-volume-control tube. Except for heater rating the 2A6 and 75 are identical.
$7.90
Miniature remote-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include small size, low grid-plate capacitance, and high transconductance
$6.90
New Old-Stock (N.O.S.) tube. The 930 is a gas phototube sensitive to red through infrared light.
$24.95
Small, sturdy, beam power tube having a high efficiency and high power sensitivity. It is designed for use as an rf power amplifier and oscillator as well as an af power amplifier and modulator in both mobile and fixed equipment.
$34.90
Medium mu triode and sharp cutoff pentode in the 9 pin miniature construction. It is intended for use as a combined VHF oscillator and mixer in television receivers.
$9.90
Cathode type twin triode designed for use as a voltage amplifier
$39.90
Superior "Black base" high-voltage power pentode. Most common power pentode found in British amplifiers such as Marshall, Hiwatt, Laney, and Sound City. The EL34EH defines the classic British rock sound of the 1960s and 1970s. Perfect EL34 for vintage equipment and for improved performance of modern amps. Extremely musical and predictable, with a sound that is rich, smooth, and detailed without being edgy.
Starting at $38.00
Single ended cathode type super control pentode primarily designed for amplifier service in radio or intermediate frequency circuits. In properly designed superheterodyne circuits it may also be used as a mixer tube.
$6.90
Beam power pentode featuring a remarkably high power sensitivity as an audio power amplifier. In Class A1 operation, it can deliver 4.5 watts of power with a B+ voltage of only 130 volts.
$5.90
Transmitting triode for oscillator applications requiring unusually stable characteristics.
$14.90
The impossible search for tubes to use in your high end studio equipment is over. JJ Electronic has spared no effort in creating a tube that meets the quality demands of working studios with the JJ 6386-LGP. This solidly constructed tube features gold pins.
$184.95
Electro-Harmonix 6SN7 medium-mu twin triode preamp tube. Made in Russia. New low noise HiFi 6SN7.
$32.60