Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
New Old Stock (NOS)
Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
Vacuum Tube - 12SA7, Heptode
Pentagrid converter designed to minimize frequency drift. They are intended for service as combined oscillators and mixers in AC, storage battery, and AC/DC operated superheterodynes.
$8.90
Vacuum Tube - 6SG7, Pentode, Semi Remote
Remote-cutoff pentode designed for use as a high-gain radio or intermediate-frequency amplifier. Features of the tube include high transconductance, low grid-plate capacitance, and a dual cathode connection
$6.90
Vacuum Tube - 12SJ7, Pentode, Sharp Cut-Off
A single-ended RF pentode having sharp cut-off characteristics. It is designed for use as a general purpose amplifier, biased detector, radio frequency oscillator or as a mixer tube in properly designed circuits.
$3.90
Vacuum Tube - 30, Triode
General purpose filament type triode designed for service in battery operated receivers. With the exception of capacitances, its ratings and characteristics are identical with those of the 1H4G.
$19.90
Vacuum Tube - 6DT8, Dual Triode
Miniature, high-mu, twin triode designed for use as a radio frequency amplifier or as a combined oscillator and mixer in FM receivers.
$3.90
Out of Stock
Vacuum Tube - 6CB6A / 6CF6, Pentode, Sharp Cut-Off
Miniature pentode designed for use as a radio-frequency or intermediate-frequency amplifier in television receivers. Features of the tube include high transconductance and low interelectrode capacitances.
$3.90
Vacuum Tube - 6EJ7 / EF184, Pentode, Sharp Cut-Off
The 6EJ7 is a high transconductance sharp-cutoff pentode in the 9 pin miniature construction.
$4.90
Vacuum Tube - 6K7GT, Pentode, Remote Cut-Off, RF
The 6K7GT is an indirectly heated pentode of the vari-mu (remote cut-off) type for use in the RF or IF stages of radio equipment.
$5.90
Vacuum Tube - 12AX7-A, Triode, Dual, High MU
Miniature high-mu twin triode each section of which has an individual cathode connection - especially suited for use in resistance-coupled voltage amplifiers, phase inverters, multivibrators, and industrial-control circuits.
$59.95
Vacuum Tube - 6CJ3 / 6CH3, Diode, Damper
Single heater-cathode type diode intended for service as the damping diode in the horizontal-deflection circuit of color television receivers. The diffusion bonded cathode practically eliminates one of the major failure mechanisms in damping diodes
$6.90
Vacuum Tube - 12AZ7A, Triode, Dual
9-pin miniature type high-mu twin triode, with heater having controlled warm-up time.
$8.90
Vacuum Tube - 1U4, Pentode
Miniature, filamentary, sharp-cutoff pentode intended for radio frequency or intermediate frequency amplifier use in battery-operated receivers.
$6.90
Vacuum Tube - 6CW5 / EL86, Pentode, Power Amplifier
The 6CW5 is an A.F. output pentode in the 9 pin miniature construction. It is intended for use in single-ended push-pull output stages.
$6.90
Vacuum Tube - 3S4 / DL92, Pentode, Power
Filamentary type power output pentode in the miniature construction. It is characterized by economy of filament power and ability to perform well at low plate supply voltages such as encountered in portable equipment.
$4.90
Vacuum Tube - 50B5, Beam Power Amplifier
Miniature beam-power amplifier designed primarily for use in the output stage of compact a-c/d-c receivers. The 50B5 features high power sensitivity and is capable of providing a relatively high power output
$3.90
Vacuum Tube - 6AJ8 / ECH81, Triode, Heptode
Triode-heptode for use in F.M., AM/FM, A.M, and television receivers.
$8.90
Vacuum Tube - 12AV7, Twin Triode
Miniature, medium-mu twin triode for use as a radio-frequency amplifier or as a combined oscillator and mixer in VHF television receivers. It my also be used as an audio-frequency amplifier.
$6.90
Vacuum Tube - 6SF5, Triode
Heater-cathode type high-mu triode designed for service as a high gain audio-frequency amplifier and is especially useful in resistance-coupled amplifier circuits in a-c or battery operated equipment
$4.90
Vacuum Tube - 6SQ7GT, Diode, Dual Triode
Duplex-diode high-mu triode intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers. The triode section incorporates a high amplification factor
$5.90
Out of Stock
Vacuum Tube - 6Y6GT, Beam Power Amplifier
Beam power pentode primarily intended for use as an audio frequency power amplifier. It is particularly useful in applications where the available supply voltage is relatively low.
$5.90
Vacuum Tube - 1A5GT, Pentode, Power Amplifier
Filament type power-amplifier pentode designed for use in the output stage of low drain battery operated equipment. The 1A5GT may be operated singly or in push-pull combination.
$4.90
Vacuum Tube - 25L6GT / 25W6, Beam Power Amplifier, Tubular Glass
Beam pentode designed for use in the audio-frequency power output stage of radio and television receivers. Features include high power sensitivity and high efficiency at relatively low plate and screen voltages.
$6.90
Vacuum Tube - 3V4 / DL94, Pentode, Power
Miniature power amplifier pentode designed for use in the power output stage of compact, battery operated equipment. It is particularly useful in three-way portable receivers which employ 90-volta batteries.
$8.90