Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
New Old Stock (NOS)
Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
Vacuum Tube - 4D32, Tetrode, Beam Power
Beam type aligned grid power amplifier. It has a unipotential oxide-coated cathode, a hard glass nonex bulb, and a glass base with short tungsten leads. The tube has a heater designed to operate from a 6.3 volt supply.
$71.95
Vacuum Tube - 420-A / 5755, Western Electric, Dual Triode
Triode, Double, Western Electric brand
$72.90
Vacuum Tube Set - for calibrating TV-7 Testers
This is a set of measured vacuum tubes for use in TV-7 vacuum tube tester calibration. The values for each vacuum tube will be measured and included for the purpose of calibrating your own TV-7 tester at home. Steps for this calibration can be found online. Three tubes will be included:
These tubes are tested at the following settings: Tube Filament Settings Bias Shunt Range 6L6 6.3 HS5-3481 23 0 D Tube Filament Settings Bias Shunt Range 6AU6 6.3 ET1-5672 16 0 B Tube Filament Settings Bias Shunt Range 12AT7 12.6 EV7-6080 10 0 C Note that brands are not guaranteed to match photograph.
- 6L6
- 6AU6
- 12AT7
These tubes are tested at the following settings: Tube Filament Settings Bias Shunt Range 6L6 6.3 HS5-3481 23 0 D Tube Filament Settings Bias Shunt Range 6AU6 6.3 ET1-5672 16 0 B Tube Filament Settings Bias Shunt Range 12AT7 12.6 EV7-6080 10 0 C Note that brands are not guaranteed to match photograph.
$75.00
Vacuum Tube - 7868, Pentode, Power Amplifier
Power pentode for output stages of high fidelity audio-amplifiers and radio receivers
$77.90
Vacuum Tube - 813, Beam Power Amplifier
General-purpose transmitting beam power tube of the thoriated-tungsten filament type designed for use as an rf power amplifier and oscillator as well as an af power amplifier and modulator.
$79.90
Vacuum Tube - 6973, Beam Power Amplifier
Beam power tube, 9 pin miniature type, for high-fidelity audio-amplifier applications
$79.90
Vacuum Tube - 811A, Triode, Power Amplifier, United States
Triode, Power Amplifier, United States
$89.90
Vacuum Tube - 50A1 / D5TF30, Ballast Tube
Gas-filled ballast tube designed to maintain a relatively constant current over a specified operating range.
$89.90
Vacuum Tube - 20LF6, Pentode, Beam
Beam power pentode designed for use in horizontal deflection circuits of color television receivers.
$90.40
Vacuum Tube - 6C10, Triple Triode
Contains three high-mu triodes with separate pin connections for all three cathodes, grids, and plates in a compact T-9 glass envelope with the novel 12 pin base.
$99.90
Vacuum Tube - 7308 / E188CC, Dual Triode
Special quality double triode designed for use as cascode amplifier, cathode follower, etc. in RF and AF circuits.
$99.90
Vacuum Tube - 6CD7 / EM34, Indicator, Tuning
Electron-ray tuning indicator with triode unit and two indicating sectors of different sensitivity.
$99.90
Out of Stock
Vacuum Tube - 7591A, Beam Power Amplifier
Glass octal beam power pentode designed for use as an audio frequency power output tube. The tube has a high power sensitivity and high efficiency and is especially designed for applications where high power output is required.
$99.90
Vacuum Tube - 1L6, Heptode
Miniature type pentagrid converter designed for use in low drain battery operated receivers.
$99.90
Vacuum Tube - 7581A / KT66, Beam Power Amplifier
Beam-power pentode primarily designed for use in audio-frequency power-amplifier applications. The 7581A is unilaterally interchangeable with the 7581 and the 6L6GC.
$99.90
Vacuum Tube - 6A5G, Triode, Power Amplifier
6A5G is a heater type power amplifier triode designed for the same service as types 6A3 and 6B4G. The tube is equipped with an octal base. This tube is quite free from hum so that no potentiometer is required for hum balance.
$99.90
Vacuum Tube - 8417, Beam Power Amplifier
Beam-power pentode intended for service in high power, high-fidelity audio equipments and is capable of 100 watts output in push-pull circuitry. It also finds application as a regulator tube.
$129.90
Vacuum Tube - 45, Triode
Filament type triode power amplifier designed for service in the output stage of audio amplifiers where high output and low harmonic distortion are desired.
$139.90
Vacuum Tube - 2A3, Triode
Filament type triode power amplifier. It is designed for service in the output stage of audio amplifiers where high output and low harmonic distortion is desired.
$179.90
Vacuum Tube - 6386, Triode, Dual, Remote Cut-Off
Miniature medium-mu twin triode in which each section exhibits a remote-cutoff characteristic. It is designed primarily for use as a cascode radio-frequency amplifier, intermediate-frequency amplifier, or mixer
$249.90