Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
New Old Stock (NOS)
Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
Vacuum Tube - 7H7, Pentode
Semi-remote cutoff pentode using the lock in construction. IT is designed for use as an RF or IF amplifier.
$6.90
Vacuum Tube - 0Z4-A, Rectifier, Full Wave, Gas
The 0Z4A is a gas-filled, double diode employing an ionic-heated cathode. Its principal application is as a full-wave power rectifier in equipment with vibrator type power supplies.
$3.90
Vacuum Tube - 12AL8, Triode, Tetrode
Power tetrode, medium-mu 9-pin miniature for use in automobile radio receivers operated directly from 12-volt storage batteries.
$5.90
Vacuum Tube - 12BL6, Pentode
Miniature remote-cutoff pentode intended for use as a radio-frequency or intermediate frequency amplifier in automobile radio receivers.
$3.90
Vacuum Tube - 12GN7A / 12HG7, Pentode, Sharp Cut-Off
Miniature, sharp-cutoff pentode designed primarily for video amplifier service in television receivers.
$7.90
Vacuum Tube - 5693, Pentode, Sharp Cut-Off
Sharp cutoff pentode intended for critical industrial applications where 10,000 hour life, extreme uniformity, rigid construction, and exceptional stability are paramount.
$19.90
Out of Stock
Vacuum Tube - 5881 / 6L6WGB, Tetrode, Beam Power
The 5881 is the electrical equivalent to types 6L6 and 6L6GC except that the plate and screen dissipation ratings have been increased approximately 20 percent.
$59.90
Vacuum Tube - 6BH6 / E90F, Pentode, Sharp Cut-Off
Miniature sharp-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include low grid-plate capacitance, relatively high transconductance, and low heater current.
$5.90
Vacuum Tube - 6DQ5, Pentode, Beam Power
Beam power tube for use as a horizontal-deflection amplifier tube in color and black-and-white television receivers.
$14.90
Vacuum Tube - 6G6G, Pentode, Power Amplifier
Pentode power amplifier designed for service where economy in current consumption is desired.
$7.90
Vacuum Tube - 6JN6, Beam Power Amplifier
Compactron beam-power pentode primarily designed for use as the horizontal-deflection amplifier in television receivers. A separate connection is provided for the beam plates to minimizes "snivets".
$8.90
Vacuum Tube - 6KG6A / EL509, Beam Power Amplifier
Magnoval type used as a horizontal-deflection amplifier in color television receivers.
$44.50
Vacuum Tube - 6L5G, Triode
General purpose triode designed for service as an oscillator, detector, or amplifier. It is recommended for use where economy of heater current is important.
$7.90
Vacuum Tube - 6SA7GT, Pentagrid Converter
Pentagrid converter. It is intended to perform the combined functions of the mixer and oscillator in superheterodyne receivers, especially those of the all-wave type. The 6SA7GT is constructed to provide excellent frequency stability.
$4.90
Vacuum Tube - 7AF7, Dual Triode
Medium-mu twin triode designed for use as a voltage amplifier or oscillator.
$14.90
Vacuum Tube Set - for calibrating TV-7 Testers
This is a set of measured vacuum tubes for use in TV-7 vacuum tube tester calibration. The values for each vacuum tube will be measured and included for the purpose of calibrating your own TV-7 tester at home. Steps for this calibration can be found online. Three tubes will be included:
These tubes are tested at the following settings: Tube Filament Settings Bias Shunt Range 6L6 6.3 HS5-3481 23 0 D Tube Filament Settings Bias Shunt Range 6AU6 6.3 ET1-5672 16 0 B Tube Filament Settings Bias Shunt Range 12AT7 12.6 EV7-6080 10 0 C Note that brands are not guaranteed to match photograph.
- 6L6
- 6AU6
- 12AT7
These tubes are tested at the following settings: Tube Filament Settings Bias Shunt Range 6L6 6.3 HS5-3481 23 0 D Tube Filament Settings Bias Shunt Range 6AU6 6.3 ET1-5672 16 0 B Tube Filament Settings Bias Shunt Range 12AT7 12.6 EV7-6080 10 0 C Note that brands are not guaranteed to match photograph.
$75.00
Vacuum Tube - 12J5, Triode, Medium MU
Medium-mu general-purpose triode designed for use as an amplifier, an oscillator, or a detector. Except for heater ratings, the 12J5 is identical to the 6J5.
$7.35
Vacuum Tube - 13DE7, Triode, Dissimilar Double
Miniature double triode in the 9-pin miniature construction. Section #1 is intended for use as a vertical deflection oscillator having medium mu and section #2 is intended for use as a vertical deflection amplifier with lo mu.
$3.90
Vacuum Tube - 1H4G, Triode, Medium MU
General purpose filament type triode designed for service in battery operated receivers. With the exception of capacitances its ratings and characteristics are identical with those of the 30.
$15.90
Vacuum Tube - 1L6, Heptode
Miniature type pentagrid converter designed for use in low drain battery operated receivers.
$99.90
Vacuum Tube - 1LC6, Heptode
Filament-type pentagrid converter designed particularly for use in low drain battery-operated equipment. This tube will operate satisfactorily with only 45 volts B supply.
$4.90
Vacuum Tube - 1LH4, Diode, Triode
Tube combining a single diode and a high-mu triode in one bulb. It is designed for service as a diode detector, AVC rectifier, and as a resistance coupled amplifier.
$4.90
Vacuum Tube - 2A7, Pentagrid Converter
Are pentagrid converters designed for service as oscillators and mixers in ac operated and ac-dc operated receivers. With the exception of heater ratings, they have identical rating and electrical characteristics.
$9.90