Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.

Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-6AX5GT Vacuum Tube - 6AX5GT, Rectifier, Full Wave
Full-wave rectifier of the heater-cathode type intended for use in AC operated and automobile receivers. Because of its heater-cathode construction it has the same heating time as that of other heater-cathode types in the receiver.
$5.90
T-6BH6_E90F Vacuum Tube - 6BH6 / E90F, Pentode, Sharp Cut-Off
Miniature sharp-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include low grid-plate capacitance, relatively high transconductance, and low heater current.
$5.90
T-6C5 Vacuum Tube - 6C5, Triode, Medium-MU
General purpose triode designed for service as an oscillator, detector, or amplifier. It is similar in characteristics to the 6C6, 6J7, and 57 with triode connection.
$6.90
T-6DC8_EBF89 Vacuum Tube - 6DC8 / 6AD8 / EBF89, Dual Diode, Pentode
Double diode remote cut-off pentode for use as an R.F. or I.F. amplifier.
$6.90
T-6K11_6Q11 Vacuum Tube - 6K11 / 6Q11, Triode, Triple
Compactron device containing two high-mu triodes and one medium-mu triode. Features of the tube include separate pin connections for all three cathodes, grids, and plates; an internal shield between sections 1 and 3.
$43.90
T-12AL5 Vacuum Tube - 12AL5, Dual Diode
Combines two independent diode units in the 7-pin miniature construction. Its high perveance permits high efficiency in either FM or AM detector service.
$7.90
T-1LA6 Vacuum Tube - 1LA6, Heptode
Low-voltage, low-current drain battery type pentagrid converter. It is designed for service as an oscillator and mixer in superheterodyne receivers which require only 90 volts of "B" battery and a single dry cell "A" battery.
$11.90
T-1LD5 Vacuum Tube - 1LD5, Diode, Pentode
Diode-audio pentode designed especially for service as a combined diode detector and pentode audio amplifier. The diode plate is located at the negative end of the filament.
$5.90
T-1LH4 Vacuum Tube - 1LH4, Diode, Triode
Tube combining a single diode and a high-mu triode in one bulb. It is designed for service as a diode detector, AVC rectifier, and as a resistance coupled amplifier.
$4.90
T-6BN4A Vacuum Tube - 6BN4A, Triode, HF
Miniature medium-mu triode designed for as a radio-frequency amplifier in a VHF television tuner.
$1.95
Save 50%
Originally: $3.90
T-6F6GT Vacuum Tube - 6F6GT, Pentode, Power Amplifier
Pentode amplifier designed for application in power output stages of receivers
$27.90
T-6HF5 Vacuum Tube - 6HF5, Beam Power Amplifier
Beam-power pentode in the 12 pin compactron construction. It is designed primarily for use as the horizontal-deflection amplifier in color television receivers.
$24.90
T-7A4_XXL Vacuum Tube - 7A4 / XXL, Triode, Medium-MU
Medium-mu triode using the lock-in construction. It is designed for use as an oscillator, detector, or amplifier. It is characterized by moderately high transconductance. It is particularly applicable for service in the higher frequencies.
$9.90
T-12BH7A Vacuum Tube - 12BH7A, Triode, Dual, Medium MU
Miniature, medium-mu twin triode designed primarily for use as a vertical-deflection amplifier in television receivers. The two sections may be employed in parallel, or as a combined vertical-deflection amplifier and vertical oscillator.
$29.90
T-6SC7 Vacuum Tube - 6SC7, Triode, Dual, HI-MU
High-mu twin triode designed primarily for use as an AF voltage amplifier. Featuring a special shielding arrangement to reduce hum, the tube is well suited for low-level audio amplifier service.
$19.90
T-6V6-SDM-MP-GT Vacuum Tube - 6V6-SD-M, Groove Tubes, Matched Pair
The 6V6 is a low-output power tube (12-18 watts) often used in Fender® amplifiers, including the Champ®, Deluxe™, Dual Professional, Vibro-King®, Princeton®, Vibrolux® and others. It has a very warm, round and soft response with rich harmonics, and distorts easily. One of the best choices ever produced for rehearsal and recording amplifiers. Our most premium design, for long life and professional performance. The choice for many pro players who use Groove Tubes in their favorite amps for recording and rehearsal; fully captures the spirit and sound of tube amps from the '50s and '60s to the present.
$55.00
T-7C5 Vacuum Tube - 7C5, Tetrode, Beam Power
Beam power amplifier tetrode designed for service in the output stage of a-c or battery-operated equipment. It is capable of supplying high-power output, power sensitivity, and efficiency with low percentages of third and higher order harmonics.
$9.90
T-14B6 Vacuum Tube - 14B6, Dual Diode, Triode
Combined high-mu triode and double diode using the 8 pin lock-in construction. It is designed for use as a diode detector, AVC rectifier, and an impedance or resistance coupled amplifier.
$6.40
T-1LE3_1LF3 Vacuum Tube - 1LE3 / 1LF3, Triode
Low-voltage, low-current drain, battery type triode. It is designed for service as an oscillator, detector, or amplifier in receivers using 90 volts "B" battery and a single dry cell "A" battery.
$7.90
T-3S4_DL92 Vacuum Tube - 3S4 / DL92, Pentode, Power
Filamentary type power output pentode in the miniature construction. It is characterized by economy of filament power and ability to perform well at low plate supply voltages such as encountered in portable equipment.
$4.90
T-5965-A Vacuum Tube - 5965-A, Dual Triode
Miniature twin-triode primarily designed for service in computer applications. Each triode section features a high zero-bias plate current, a sharp-cutoff characteristic, and a separate cathode connection.
$4.90
T-6BS8 Vacuum Tube - 6BS8, Dual Triode
Miniature, medium-mu twin triode designed for use as a VHF cascode amplifier. In this application, section two (pins 1, 2, and 3) is intended for the input section.
$2.95
Save 50%
Originally: $5.90
T-6F5_H63 Vacuum Tube - 6F5 / H63, Triode
General purpose high-mu triode. It is designed for service as a high gain resistance coupled amplifier in AC and AC - DC operated receivers.
$6.90
T-7B6 Vacuum Tube - 7B6, Dual Diode, Triode
Combined high-mu triode and double diode using the 8 pin lock-in construction. It is designed for use as a diode detector, AVC rectifier, and an impedance or resistance coupled amplifier.
$4.75
Don't see what you're looking for? Send us your product suggestions!