Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
New Old Stock (NOS)
Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
Vacuum Tube - 50L6GT, Beam Power Amplifier
The 50L6GT is designed for service in the output stage of ac/dc receivers. It delivers a high power output with high power sensitivity from low supply voltages.
$9.90
Vacuum Tube - 6136 / 6AU6WA, Pentode, Sharp Cut-Off
Miniature sharp-cutoff pentode designed primarily for use as a high gain radio-frequency or intermediate-frequency amplifier. Low grid-plate capacitance and high transconductance make it especially suited for high-frequency wide-band applications.
$9.90
Vacuum Tube - 6005 / 6AQ5W, Tetrode, Beam Power
Miniature beam-power pentode for use as an audio-frequency power amplifier. In this application the tube is capable of delivering an output of approximately 4.5 watts.
$9.90
Vacuum Tube - 12DT8, Triode, Dual
General-purpose high-mu twin triode of the 9-pin miniature type intended for use as an rf amplifier and as a combined oscillator-mixer in fm tuners. This tube is also useful in a wide variety of applications in radio and television receivers.
$9.90
Vacuum Tube - 6U7G, Pentode, Remote Cut-Off
Triple grid remote cut-off amplifier. It is suitable for use with AVC in RF and IF amplifiers and minimizes cross modulation. Its electrical characteristics are similar to those of the 6D6.
$9.90
Vacuum Tube - 11MS8, Triode, Pentode
Miniature type used in combined vertical-deflection-oscillator and vertical-deflection-amplifier applications in black and white television receivers. Requires miniature 9-contact socket.
$9.90
Vacuum Tube - 6KD8 / 6U8A, Triode, Pentode
Medium mu triode and sharp cutoff pentode in the 9 pin miniature construction. It is intended for use as a combined VHF oscillator and mixer in television receivers.
$9.90
Vacuum Tube - 6AQ5A / 6HG5, Tetrode, Beam Power
Miniature beam-power pentode designed for use in the audio-frequency power output stage of television and radio receivers. It may also be used as a triode-connected vertical deflection amplifier in television receivers.
$9.90
Vacuum Tube - 6DQ6A-B / 6GW6, Beam Power Amplifier
High-perveance beam power pentode designed for use as a horizontal deflection amplifier tube in high efficiency deflection circuits of television receivers.
$9.90
Vacuum Tube - 6N7GT, Dual Triode, Power Amplifier
Heater-cathode type twin triode designed for use as a class B power amplifier in the output stage of a-c or battery operated equipment. It may be used in other applications such as a biased detector, oscillator phase inverter or class A amplifier
$10.90
Vacuum Tube - 6GK6, Beam Power Amplifier
General-purpose power pentode that may be used either in audio output amplifier or video power output amplifier stages of television receivers.
$10.90
Vacuum Tube - 6679 / 12AT7, Dual Triode
Miniature high-mu twin triode suitable for use as a grounded-grid amplifier or as a frequency converter at frequencies below approximately 300 megacycles. Its electrical characteristics are essentially equivalent to those of the 12AT7.
$10.90
Out of Stock
Vacuum Tube - 6U10, Triode, Triple
Compactron containing two medium-mu triodes and one high-mu triode.
$10.95
Vacuum Tube - 1LA6, Heptode
Low-voltage, low-current drain battery type pentagrid converter. It is designed for service as an oscillator and mixer in superheterodyne receivers which require only 90 volts of "B" battery and a single dry cell "A" battery.
$11.90
Vacuum Tube - 6AS7GA, Dual Triode, Low MU
High current, twin power triode widely used in electronically regulated power supplies. The high perveance of this tube permits it to pass large currents at low plate voltages, thus providing for efficient series regulation. Except for the use of a T-12 glass envelope, the 6AS7GA is identical to the 6AS7G.
$11.90
Vacuum Tube - 6K6GT, Pentode, Power Amplifier
The 6K6GT is an indirectly heated cathode type power amplifier pentode designed for service in the output stages of AC, AC/DC and storage battery operated receivers.
$11.90
Vacuum Tube - 6BY5G, Dual Rectifier
Isa full-wave high-vacuum rectifier designed for damper service in television deflection circuits. It can also be used in conventional rectifier applications.
$11.90
Vacuum Tube - 7F8, Dual Triode
Twin triode designed for use as a grounded-grid radio-frequency amplifier or as a frequency converter at frequencies up to 300 megacycles.
$11.90
Vacuum Tube - 12DQ6B / 12GW6, Beam Power Amplifier
Beam power pentode primarily designed for use as the horizontal-deflection amplifier in television receivers.
$11.90
Vacuum Tube - 6202 / 6X4WA, Rectifier, Full Wave
Miniature full-wave high-vacuum rectifier intended for use in power supplies which have low d-c output-current requirements.
$11.90
Vacuum Tube - 6J7GT, Pentode, Sharp Cut-Off
Sharp cut-off general purpose amplifier. With the exception of heater and capacitance ratings, the electrical characteristics are similar to those of the 6C6.
$11.90
Vacuum Tube - 6BG6G-GA, Beam Power Amplifier
Beam-power pentode designed primarily for use as the horizontal deflection amplifier in television receivers. Electrically and physically, the 6BG6GA is a replacement for the 6BG6G
$11.90