Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
New Old Stock (NOS)
Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
Vacuum Tube - 6GU7, Dual Triode, Medium MU
Medium-mu twin triode of the 9 pin miniature type intended for use in the matrixing circuits of color television receivers. It can also be used in phase-inverter, multivibrator, and general-purpose amplifier applications
$7.90
Vacuum Tube - 6HF8, Triode, Pentode
High-mu triode and sharp-cutoff pentode in the 9 pin miniature construction. It is intended for use in color and black-and-white television receivers.
$6.90
Vacuum Tube - 7199, Triode, Pentode
Triode-pentode designed primarily for high fidelity audio applications. The pentode section is particularly suited to preamplifier service while the triode section is intended for use as a phase inverter.
$69.90
Vacuum Tube - 83V, Rectifier, Full Wave
Power rectifier with low internal voltage drops. It is designed for service in AC operated receivers that require high currents
$25.60
Vacuum Tube - 12AL5, Dual Diode
Combines two independent diode units in the 7-pin miniature construction. Its high perveance permits high efficiency in either FM or AM detector service.
$7.90
Vacuum Tube - 3C24 / 24G, Triode
Medium-mu triode - modulator, oscillator, amplifier.
$19.90
Out of Stock
Vacuum Tube - 5750 / 6BE6W, Heptode
Miniature pentagrid converter designed for use as a combined mixer and oscillator in superheterodyne circuits.
$4.90
Vacuum Tube - 5902, Tetrode, Beam Power
The premium subminiature type 5902 is a beam power pentode designed for use as an audio amplifier. It is intended for operation under conditions of severe shock, vibration, high temperature, and high altitude.
$9.90
Vacuum Tube - 5933 / 807W, Tetrode, Beam Power
Rugged beam amplifier tube designed for use in mobile transmitters or amplifiers which may be submitted to shock or vibration.
$21.55
Vacuum Tube - 6146B / 8298A, Beam Power Amplifier
Tube having high efficiency and high power sensitivity for use in mobile and stationary equipment. It is rated as an af power amplifier and modulator, a linear rf power amplifier, and a Class C rf power amplifier and oscillator.
$44.90
Vacuum Tube - 6669 / 6AQ5A, Tetrode, Beam Power
Miniature beam-power pentode designed for use as an audio-frequency power amplifier.
$14.90
Vacuum Tube - 6AH4GT, Triode
High perveance triode for use as a vertical deflection amplifier in television receivers.
$19.90
Vacuum Tube - 6DL4 / EC88, Triode
Triode intende for use as a grounded grid UHF amplifier for bands IV and V.
$7.90
Vacuum Tube - 6DQ6A-B / 6GW6, Beam Power Amplifier
High-perveance beam power pentode designed for use as a horizontal deflection amplifier tube in high efficiency deflection circuits of television receivers.
$9.90
Vacuum Tube - 6G5 / 6U5, Tuning Indicator
High-vacuum, heater-cathode type of tube designed to indicate visually, by means of a fluorescent target, the effects of change in the controlling voltage. The tube, therefore, is essentially a voltage indicator
$69.90
Vacuum Tube - 6J7GT, Pentode, Sharp Cut-Off
Sharp cut-off general purpose amplifier. With the exception of heater and capacitance ratings, the electrical characteristics are similar to those of the 6C6.
$11.90
Vacuum Tube - 6JG6A, Beam Power Amplifier
Beam power tube with separate grid-no.3 base-pin terminal for "snivets" control. It is designed for horizontal-deflection-amplifier service in Low-B+ black-and-white TV receivers.
$49.90
Vacuum Tube - 6L6, Tetrode, Beam Power, Metal
The 6L6 is designed with high power sensitivity and high efficiency for service in the output stages of AC receivers. They are capable of delivering an output at all power levels with a very low percentage of harmonic distortion.
$29.90
Vacuum Tube - 6L7, Heptode
Mixer tube designed for service with a separate oscillator as the first detector in superheterodyne receivers. The control grid is of the remote cut-off type which allows the use of AVC and minimizes cross-modulation.
$5.90
Vacuum Tube - 6N7GT, Dual Triode, Power Amplifier
Heater-cathode type twin triode designed for use as a class B power amplifier in the output stage of a-c or battery operated equipment. It may be used in other applications such as a biased detector, oscillator phase inverter or class A amplifier
$10.90
Vacuum Tube - 6SB7-Y, Pentagrid Converter
Pentagrid metal tube designed for use as a combined mixer and oscillator in superheterodyne circuits. Especially useful in FM receiver service below 120 megacycles.
$6.65
Vacuum Tube - 7G7 / 1232, Pentode
Sharp cut-off pentode voltage amplifier designed for use in television or other high-frequency amplifiers where the low impedance circuits required result in low gain which may be partially compensated for by use of a high transconductance tube.
$13.90
Vacuum Tube - 10BQ5, Beam Power Amplifier, output pentode
The 10BQ5 is an output pentode designed for application in medium power hi-fi amplifiers. A pair of tubes in class AB, push-pull conventional operation yields an output of up to 17 watts at 4% distortion (without feedback).
$6.90
Vacuum Tube - 12SC7, Dual Triode, HI-MU
The type 12SC7 is a twin-triode amplifier designed for use as an audio amplifier or phase inverter. Special shielding arrangement in the base permits operation at a low hum level.
$5.90