Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
T-6BC8_6BZ8 Vacuum Tube - 6BC8 / 6BZ8, Dual Triode
Miniature, medium-mu, semi-remote cutoff twin triode intended for application as a VHF cascode amplifier in a television receiver.
$5.90
T-117Z3 Vacuum Tube - 117Z3, Half-wave rectifier, miniature type
Heater, for unipotential cathode. 117 volts AC-DC.
$4.90
T-5750_6BE6W Vacuum Tube - 5750 / 6BE6W, Heptode
Miniature pentagrid converter designed for use as a combined mixer and oscillator in superheterodyne circuits.
$4.90
T-6005_6AQ5W Vacuum Tube - 6005 / 6AQ5W, Tetrode, Beam Power
Miniature beam-power pentode for use as an audio-frequency power amplifier. In this application the tube is capable of delivering an output of approximately 4.5 watts.
$9.90
T-7B8 Vacuum Tube - 7B8, Heptode
Pentagrid converter designed to perform the combined functions of the oscillator and mixer in superheterodyne receivers
$1.95
Save 50%
Originally: $3.90
T-12AT7_ECC81 Vacuum Tube - 12AT7 / ECC81, Triode, Dual, HI-MU
The 12AT7 is a miniature, high-mu, twin triode designed for use as a grounded-grid radio-frequency amplifier or as a combined oscillator and mixer at frequencies below approximately 300 megacycles.
$14.90
T-12SK7GT Vacuum Tube - 12SK7GT, Pentode, Remote Cut-Off, RF
Single ended cathode type super control pentode primarily designed for amplifier service in radio or intermediate frequency circuits. In properly designed superheterodyne circuits it may also be used as a mixer tube.
$6.90
T-12SL7GT Vacuum Tube - 12SL7GT, Triode, Dual, HI-MU
High-mu twin triode designed for use in resistance-coupled circuits as a voltage amplifier or phase inverter. Except for heater characteristics and ratings, the 12SL7GT is identical to the 6SL7GT.
$6.90
T-5670_2C51W Vacuum Tube - 5670 / 2C51W, Triode, Dual
Miniature medium-mu twin triode each section of which as a separate cathode connection. The tube is suited for use in a wide variety of general-purpose amplifier and mixer circuits as well as numerous multi-vibrator and oscillator applications.
$4.90
T-5Y3GT Vacuum Tube - 5Y3GT, Rectifier, Full Wave
Filamentary twin-diode designed for full-wave rectifier operation in power supplies that have d-c output current requirements up to approximately 125 milliamperes.
$29.45
T-6386-GLP-JJ Vacuum Tube - 6386-LGP, JJ Electronics, Gold Pin
The impossible search for tubes to use in your high end studio equipment is over. JJ Electronic has spared no effort in creating a tube that meets the quality demands of working studios with the JJ 6386-LGP. This solidly constructed tube features gold pins.
$125.95
T-6DA6_EF89 Vacuum Tube - 6DA6 / EF89, Pentode
High-slope R.F. pentode particularly suitable for use in F.M. receivers.
$24.95
T-KT66-TUNG-X Vacuum Tube - KT66, Tung-Sol Reissue
Premium power beam tetrode, a reissue of the famous “Bluesbreaker” tube. Full tone with plenty of chime and powerful bass.
  • High quality & cost-effective
  • Originally a British equivalent to 6L6 and a mainstay of the British hi-fi industry
  • Used in '50s - '60s hi-fi favorites such as the Heath W-5M and many Leak amplifiers
Starting at $35.95
T-0Z4-A Vacuum Tube - 0Z4-A, Rectifier, Full Wave, Gas
The 0Z4A is a gas-filled, double diode employing an ionic-heated cathode. Its principal application is as a full-wave power rectifier in equipment with vibrator type power supplies.
$3.90
T-12V6GT Vacuum Tube - 12V6GT, Tetrode, Beam Power
Beam pentode designed primarily for use in the audio output stage of a-c and storage-battery-operated equipment. It is capable of supplying high power output with high sensitivity, high efficiency, and low third and higher-order harmonic distortion.
$6.90
T-1LN5 Vacuum Tube - 1LN5, Pentode (VT179)
Sharp-cutoff pentode designed for use as a radio-frequency, intermediate frequency, or audio-frequency amplifier in battery operated receivers.
$6.25
T-1N5GT_1P5GT Vacuum Tube - 1N5GT / 1P5GT, Pentode, Sharp Cut-Off, RF
Filamentary type sharp cut-off pentode voltage amplifier. It is designed for service in low-drain battery-operated receivers as an RF, IF, or AF amplifier.
$5.90
T-50A5 Vacuum Tube - 50A5, Tetrode, Beam Power
Beam power amplifier designed primarily for use in the output stage of a-c/d-c receivers. The 50A5 features high power sensitivity and high efficiency when operated at relatively low plate and screen voltages.
$4.90
T-6A8GT Vacuum Tube - 6A8GT, Pentagrid Converter
Pentagrid converter designed for service as a combined oscillator and mixer in AC, storage battery, and AC-DC operated receivers
$29.90
Out of Stock
T-7G7_1232 Vacuum Tube - 7G7 / 1232, Pentode
Sharp cut-off pentode voltage amplifier designed for use in television or other high-frequency amplifiers where the low impedance circuits required result in low gain which may be partially compensated for by use of a high transconductance tube.
$13.90
T-5726_6AL5W Vacuum Tube - 5726 / 6AL5W, Dual Diode
Twin diode miniature type intended for applications where dependable performance under shock and vibration is paramount. The 5726 is a "premium" version of the 6AL5W
$2.45
Save 50%
Originally: $4.90
T-2A3-40-JJ Vacuum Tube - 2A3, JJ Electronics
The JJ Electronic 2A3 features a robust construction in a beautiful thick glass envelope. The JJ 2A3 offers 40 Watts of plate dissipation which far surpasses the headroom of other 2A3 tubes by 25 Watts. The single plate build and increased ratings give this tube the highest reliability. The JJ 2A3 has amazing detail and clarity with excellent separation.
Starting at $129.95
T-6189_12AU7WA Vacuum Tube - 6189 / 12AU7WA, Triode, Dual, Medium MU
Miniature medium-mu twin triode suitable for a wide variety of general-purpose amplifier, oscillator, and multivibrator applications.
$14.95
T-6AK6 Vacuum Tube - 6AK6, Pentode
Heater-cathode type of tube intended for use in compact, light-weight equipment. Because of its small size, the 6AK6 can be used singly or in push-pull to effect a more compact design of power-line receivers.
$4.90
Don't see what you're looking for? Send us your product suggestions!