Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
New Old Stock (NOS)
Our new-old-stock tubes were made in the U.S. by the major manufacturers, with several types made in Western Europe or Japan. All NOS tubes are tested and guaranteed.
Vacuum Tube - 6DN7, Triode, Dissimilar Double
Dissimilar double-triode designed for use as a combined vertical-deflection oscillator and amplifier in television receivers. Section 1 is intended for service as an oscillator and section 2 as an amplifier.
$8.75
Vacuum Tube - 6GM8 / ECC86, Dual Triode
Frame-grid twin triode designed for low supply voltage applications. It is especially suitable for instrumentation/industrial use as a direct-coupled wide band amplifier and for automobile radio as an RF amplifier and self-oscillating mixer.
$24.90
Vacuum Tube - 7199, Triode, Pentode
Triode-pentode designed primarily for high fidelity audio applications. The pentode section is particularly suited to preamplifier service while the triode section is intended for use as a phase inverter.
$69.90
Out of Stock
Vacuum Tube - 7B6, Dual Diode, Triode
Combined high-mu triode and double diode using the 8 pin lock-in construction. It is designed for use as a diode detector, AVC rectifier, and an impedance or resistance coupled amplifier.
$4.75
Vacuum Tube - 1LA6, Heptode
Low-voltage, low-current drain battery type pentagrid converter. It is designed for service as an oscillator and mixer in superheterodyne receivers which require only 90 volts of "B" battery and a single dry cell "A" battery.
$11.90
Vacuum Tube - 2A3, Triode
Filament type triode power amplifier. It is designed for service in the output stage of audio amplifiers where high output and low harmonic distortion is desired.
$179.90
Vacuum Tube - 5693, Pentode, Sharp Cut-Off
Sharp cutoff pentode intended for critical industrial applications where 10,000 hour life, extreme uniformity, rigid construction, and exceptional stability are paramount.
$19.90
Out of Stock
Vacuum Tube - 6AX5GT, Rectifier, Full Wave
Full-wave rectifier of the heater-cathode type intended for use in AC operated and automobile receivers. Because of its heater-cathode construction it has the same heating time as that of other heater-cathode types in the receiver.
$5.90
Vacuum Tube - 6C8G, Dual Triode
General purpose twin triode having two independent units, with all electrodes brought out to separate terminals.
$6.95
Vacuum Tube - 5881 / 6L6WGB, Tetrode, Beam Power
The 5881 is the electrical equivalent to types 6L6 and 6L6GC except that the plate and screen dissipation ratings have been increased approximately 20 percent.
$59.90
Vacuum Tube - 5Z4, Rectifier, Full Wave
The 5Z4 is designed for service as a power rectifier in AC operated receivers.
$8.90
Vacuum Tube - 6CA5 / 6EH5, Tetrode, Beam Power
Miniature beam power pentode designed for service as an audio output amplifier. It features high power sensitivity at relatively low plate and screen voltages.
$3.90
Vacuum Tube - 6ES8 / ECC189, Dual Triode, Remote Cut-Off
Semi-remote cutoff double triode designed for use as a cascode VHF amplifier. It features extremely high gm, low capacitance, and low noise.
$6.90
Vacuum Tube - 6SL7WGT, Dual Triode, HI-MU
Rugged high mu twin triode designed for service as a resistance coupled amplifier or phase inverter in applications requiring resistance to shock and vibrations.
$40.95
Vacuum Tube - 7062 / E180CC, Dual Triode
Special quality double triode designed for use in computer circuits.
$13.90
Vacuum Tube - 13EM7 / 15EA7, Triode, Dissimilar Double
Dissimilar double-triode designed for use as a combined vertical deflection oscillator and amplifier in television receivers
$6.90
Vacuum Tube - 12SG7, Pentode, Semi-Remote Cut-Off
Semi-remote cut off pentode voltage amplifier in the octal metal construction. It features high transconductance with low grid-plate capacitance and a dual cathode connection to minimize effects of common cathode circuit coupling.
$5.35
Vacuum Tube - 43, Pentode
Glass type power amplifier pentode designed especially for use in the output stage of a-c/d-c receivers. The 43 is identical in electrical characteristics to the type 25A6 tube.
$7.90
Vacuum Tube - 6AC10, Triple Triode
Compactron containing three high-mu triodes. It is designed for use primarily as a color-difference amplifier in color television receivers.
$7.90
Vacuum Tube - 6AZ8, Triode, Pentode
Medium mu triode and a semi-remote cutoff pentode in the 9 pin miniature construction. It is intended for general purpose applications in both monochrome and color television receivers.
$12.90
Vacuum Tube - 6JZ6, Beam Power Amplifier
Compactron beam-power pentode designed for use in the horizontal deflection amplifier in television receivers. A separate connection is provided for the beam plates to minimize "snivets".
$8.90
Vacuum Tube - 10BQ5, Beam Power Amplifier, output pentode
The 10BQ5 is an output pentode designed for application in medium power hi-fi amplifiers. A pair of tubes in class AB, push-pull conventional operation yields an output of up to 17 watts at 4% distortion (without feedback).
$6.90