The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum TubesThe first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Maximum of Reliability - Outstanding Tonal Quality! The all-new TAD 12BH7A-STR combines the best sonic and mechanical performance of the NOS RCA black plate with advantages of the GE version.
9 pin miniature preamp tube (Amplification Factor = 100). This is the ubiquitous Chinese 12AX7 with added selection. The gain is high and the American "Groove Tubes" must be filtering out the noisiest ones. Great chiming tone with sweet, warm midrange excellent for Marshall® and Fender® amps. Smooth distortion characteristics and one of the highest-output preamp tubes in the GT 12AX7 line, with very consistent quality
The TAD ECC83 WA Selected provides a stunning warm tone, thick midrange and sweet natural harmonics. We designed it with a triple mica construction for low noise performance. Perfect for clean or moderate gain preamps as well as for high-gain amps from V2 position. Its great dynamics, low noise operation and balanced warm tone make the TAD ECC83 WA to be an excellent all-rounder with great value for money.
Octal rectifier tube (Max DC output current = 125 mA) An indirectly heated diode intended for rectification of commercial-frequency alternating current. It has a 140 mA maximum output and filament voltage of 5 V and a filament current of 2 A ± 0.2 mA.
Combines two diode units and a high-mu triode in a single envelope. Each section uses a common cathode. It is intended for service as a combined detector, AVC source, and high gain audio amplifier.
9 pin miniature preamp tube (Amplification Factor = 100). This Russian tube has strong lows and bright highs. Its lows demand attention when playing full bar chords. In overdrive, it offers a lot of crunchy fizz.
Octal rectifier tube (Max DC output current = 250 mA)
A new take on the classic 12AX7 preamp tube. While it uses the same rugged build and thick glass as other JJ preamp tubes, this tube differs in construction from the typical 12AX7 in that it features a medium-long plate, which provides a dynamic and open sound with a rich forward sounding mid range. This tube offers low noise and low microphonics.
The JJ Electronic EF806S is a high quality reproduction of the classic EF86. This pentode features a robust construction with the internal shielding used in the original tubes. The JJ EF806 can be used in any EF86 circuit including microphones and amplifiers.
Starting at $26.66
Superior directly heated rectifier Diode. Replacement for all 5U4 types, including NOS-style "big bottle" tubes.
9 pin miniature preamp tube (Amplification Factor = 100). The Chinese 12AX7B is very similar in tone to its standard Chinese cousin, but the Bs seem to average in at slightly lower gain and noise.
A high performance, long plate version of the ECC82 / 12AU7. Like all JJ preamp tubes, these are built into a rugged package using the spiral filament and robust plate structure resulting in low microphonics and high reliability. The long plate version of this tube differs from the standard version with its stronger and fuller sound which offers a wider and more balanced frequency response.
Starting at $11.97
Miniature half-wave rectifier for use in line-operated equipment having series-connected heaters. The heater is tapped to permit operation of a panel lamp.
Combines a high mu triode and two independent diode units in the 7-pin miniature construction. It permits a single tube to function as detector, AVC rectifier, and audio amplifier.
Superior medium-Mu Twin Triode for use in preamplifier and driver circuits. Standard replacement for all circuits requiring 12AU7/ECC82 types.
Starting at $12.42
The JJ Electronic EZ81 is a noval based rectifier with a rugged construction. These tubes are an excellent choice for guitar amps such as 18W Marshalls and Hi-Fi amplifiers as well. This tube will work in any EZ81 or 6CA4 application.
Superior medium-mu twin triode driver tube for hifi use. 3.5 watts dissipation per plate. New design of excellent quality
Starting at $15.98
Miniature heater-cathode type twin diode designed for full-wave rectifier operation in compact power supplies. The tube is intended for service in automobile and a-c radio receivers.
Cathode type rectifier designed particularly for use in automobile receivers.
Filamentary twin-diode designed for full-wave rectifier operation in power supplies that have d-c output current requirements up to approximately 125 milliamperes.
Mullard 12AU7 / ECC82 dual triode preamp tube. Made in Russia.
The Perfect Choice for Stereo Audio Applications - Ideal as a Balanced Driver. Latest revision providing great musical performance and rich tone. This TAD 12AU7A / ECC82 has especially strong systems which are selected to provide two symmetric triodes. The perfect choice for stereo audio applications and ideal as a balanced driver.
Premium directly heated heavy duty rectifier Diode. Re-issue of the most popular rectifier valve ever built by Mullard. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied.
- Low internal voltage drop & controlled heater warm up time
- Excellent choice for both Hifi and instrument amplification
- Replacement/upgrade for all 5AR4/GZ34 types