Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.

Medium mu triode and a sharp cutoff pentode. The pentode section may be used as an IF amplifier or a reactance tube; the triode section is well suited for use in low-frequency-oscillator, sync clipper, sync separator, and phase splitter circuits.
$15.90

Miniature sharp cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Its low grid-plate capacitance and high transconductance make it especially suited for high-frequency wide-band applications
$7.90

Miniature remote-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include small size, low grid-plate capacitance, and high transconductance
$6.90

Sharp cut-off general purpose amplifier. With the exception of heater and capacitance ratings, the electrical characteristics are similar to those of the 6C6.
$6.90

Pentode amplifier having a remote control grid characteristic and utilizing the miniature construction. As a RF amplifier, it is characterized by high transconductance and low grid-plate capacitance.
$8.90

Metal sharp-cutoff pentode designed for use as a biased detector or high-gain amplifier.
$6.90

Sharp-cutoff pentode of the 9-pin miniature type intended for use as an audio amplifier in applications requiring reduced microphonics, leakage noise, and hum.
$12.90

Medium mu triode and sharp cutoff pentode in the 9 pin miniature construction. It is intended for use as a combined VHF oscillator and mixer in television receivers.
$9.90

Miniature remote-cutoff pentode designed for use as a radio-frequency or intermediate frequency amplifier in compact, battery-operated equipment.
$4.90

Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
$6.90

Miniature tube which contains a sharp-cutoff pentode and a triode in one envelope. Each section has a separate cathode and is electrically independent. Primarily intended as a combined triode oscillator and pentode mixer in television receivers.
$7.90

The 6K6GT is an indirectly heated cathode type power amplifier pentode designed for service in the output stages of AC, AC/DC and storage battery operated receivers.
$11.90

Miniature tube which contains a sharp-cutoff pentode and a medium-mu triode. Each section has a separate cathode and is electrically independent.
$6.90

The T-12SK7 is the same as the 6SK7 except for heater ratings.
$6.90

Triode-pentode in the 9 pin miniature construction. It is designed for use as a frequency changer in television receivers.
$6.90

Pentode for use as RF, IF, or video amplifying valve or mixing valve in television receivers.
$4.90

The 12AU6 is a pentode amplifier having a sharp cut-off control characteristic using the miniature construction. With high transconductance, low grid-plate capacitance, it is intended for service as either an RF or AF amplifier.
$5.90

Miniature, remote-cutoff pentode designed primarily for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include low grid-plate capacitance, relatively high transconductance, and low heater current.
$6.90

Remote-cutoff pentode designed for use as a high-gain radio or intermediate-frequency amplifier. Features of the tube include high transconductance, low grid-plate capacitance, and a dual cathode connection
$6.90

Miniature power pentode designed primarily for use as the video output amplifier in television receivers. Like the 12BY7, it features high transconductance, high power sensitivity, and low interelectrode capacitances.
$13.90

Miniature diode sharp-cutoff pentode designed for use as a combined detector, audio-frequency amplifier, and automatic-volume-control tube in compact, battery-operated receivers.
$6.90

Miniature sharp-cutoff pentode designed primarily for use as a high gain radio-frequency or intermediate-frequency amplifier. Low grid-plate capacitance and high transconductance make it especially suited for high-frequency wide-band applications.
$9.90

Heater-cathode type of tube intended for use in compact, light-weight equipment. Because of its small size, the 6AK6 can be used singly or in push-pull to effect a more compact design of power-line receivers.
$4.90

Miniature power amplifier pentode designed for use in the power output stage of compact, battery operated equipment. It is particularly useful in three-way portable receivers which employ 90-volta batteries.
$8.90