The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
New Old Stock (NOS)Our new-old-stock tubes were made by the major U.S. manufacturers, along with a small number of European manufacturers and are tested and guaranteed.
Vacuum TubesThe first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 6AU6A / EF94, Pentode, Sharp Cut-Off
Miniature sharp cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Its low grid-plate capacitance and high transconductance make it especially suited for high-frequency wide-band applications
Vacuum Tube - 35W4, Rectifier, Half Wave
Miniature half-wave rectifier for use in line-operated equipment having series-connected heaters. The heater is tapped to permit operation of a panel lamp.
Vacuum Tube - 6V6GT, Chinese
Chinese 6V6GT Available in Singles, Matched Pairs or Matched Quads - please select from list.
Starting at $13.02
Vacuum Tube - 6X4 / EZ90, Rectifier, Full Wave
Miniature heater-cathode type twin diode designed for full-wave rectifier operation in compact power supplies. The tube is intended for service in automobile and a-c radio receivers.
Vacuum Tube - 6BE6 / EK90, Heptode
Miniature heptode primarily designed to perform the combined functions of the mixer and oscillator in superheterodyne circuits in both the standard broadcast and FM bands.
Vacuum Tube - 12BA6 / HF93, Pentode, Remote Cut-Off
Pentode amplifier having a remote control grid characteristic and utilizing the miniature construction. As a RF amplifier, it is characterized by high transconductance and low grid-plate capacitance.
Vacuum Tube - 811A, Triode, Power Amplifier, China
Chinese 811A Available in Singles or Matched Pairs - please select from list.
Starting at $26.04
Vacuum Tube - 6AQ5A / 6HG5, Tetrode, Beam Power
Miniature beam-power pentode designed for use in the audio-frequency power output stage of television and radio receivers. It may also be used as a triode-connected vertical deflection amplifier in television receivers.
Vacuum Tube - 6BA6 / EF93, Pentode, Remote Cut-Off
Miniature remote-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include small size, low grid-plate capacitance, and high transconductance
Vacuum Tube - 12BE6 / HK90, Heptode
Miniature pentagrid converter designed to perform simultaneously the combined functions of the mixer and oscillator in superheterodyne receivers. The tube is suitable for use in the standard broadcast and FM bands.
Vacuum Tube - 6C4 / EC90, Triode, Medium-MU
Miniature, medium-mu triode suitable for use in a wide variety of general purpose applications. It is especially useful as a local oscillator in high-frequency and very-high-frequency receiver circuits.
Vacuum Tube - 50L6GT, Beam Power Amplifier
The 50L6GT is designed for service in the output stage of ac/dc receivers. It delivers a high power output with high power sensitivity from low supply voltages.
Vacuum Tube - 6AN8A, Triode, Pentode
Medium mu triode and a sharp cutoff pentode. The pentode section may be used as an IF amplifier or a reactance tube; the triode section is well suited for use in low-frequency-oscillator, sync clipper, sync separator, and phase splitter circuits.
Vacuum Tube - 35Z5GT, Rectifier, Half Wave
Heater-cathode type diode designed for use as a half-wave rectifier in ac/dc receivers. A heater tap is provided to permit operation with a panel lamp.
Vacuum Tube - 6SJ7, Pentode, Sharp Cut-Off
Metal sharp-cutoff pentode designed for use as a biased detector or high-gain amplifier.
Out of Stock
Vacuum Tube - 12AV6, Diode, Dual Triode
Combines a high mu triode and two independent diode units in the 7-pin miniature construction. It permits a single tube to function as detector, AVC rectifier, and audio amplifier.
Vacuum Tube - 6X5GT / EZ35, Rectifier, Full Wave
Cathode type rectifier designed particularly for use in automobile receivers.
Vacuum Tube - 6K7G, Pentode, Remote Cut-Off, RF
The 6K7G is an indirectly heated pentode of the vari-mu (remote cut-off) type for use in the RF or IF stages of radio equipment.
Vacuum Tube - 6GH8A, Triode, Pentode
Miniature tube which contains a sharp-cutoff pentode and a medium-mu triode. Each section has a separate cathode and is electrically independent.
Vacuum Tube - 35L6GT, Beam Power Amplifier
Beam pentode primarily designed for use in the audio frequency power output stage of radio receivers. Features include high power sensitivity and high efficiency at relatively low plate and screen voltages.
Vacuum Tube - 6AL5 / 6EB5, Dual Diode
The 6AL5 combines two independent diode units in the 7 pin miniature construction. Its high perveance permits high efficiency in either FM or AM detector service.
Vacuum Tube - 6SK7, Pentode, Remote Cut-Off, RF
Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
Vacuum Tube - 6L6WGC, Black Plate, Made in China
6L6WGC - Black Plate, Made in China
Starting at $17.30
Vacuum Tube - 6SQ7, Diode, Dual Triode
Metal duplex-diode high-mu triode. It is intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers.