Vacuum Tube Accessories

P-SAYJ Tube Converter - Yellow Jackets®, YJS, Converter Only
Converter-only version of the P-YJS now available for a limited time. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. The YJS is for amps with fixed bias power tubes.
$33.38
Save 11%
Originally: $37.50
P-SAYJ-C Tube Converter - Yellow Jackets®, YJC, Converter Only
Converter-only version of the P-YJC now available for a limited time. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJC is similar to the YJS, but for use in amps with cathode-biased power tubes. Cathode-biased power tubes have a bias resistor connected from their cathode to ground.
$33.38
Save 11%
Originally: $37.50
P-SAYJ-SHORT Tube Converter - Yellow Jackets®, YJShort, Converter Only
Converter-only version of the P-YJShort now available for a limited time. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJShort is shorter than the standard YJS converter, allowing for use in amps that do not have room for the standard converters.
$40.05
Save 11%
Originally: $45.00
P-SAYJ-TRIODE Tube Converter - Yellow Jackets®, YJS, Triode Version, Converter Only
Converter-only version of the P-YJS-T now available for a limited time. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. The YJS is for amps with fixed bias power tubes.
$33.38
Save 11%
Originally: $37.50
P-SBRKT Bracket - for 8 Pin Socket
Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.
$0.55
Save 11%
Originally: $0.62
P-SBRKT2 Bracket - for 9 Pin Socket
Washer fits around sockets to hold them to chassis.
$0.45
Save 10%
Originally: $0.50
P-SG11X Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $0.55
Save 11%
Originally: $0.62
P-SH12-1-31 Mounting Plate - for sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.66
Save 11%
Originally: $1.86
P-SH2-104-2 Washer - Wavy
Works with P-ST8-810 for mounting without screws.
$0.36
Save 10%
Originally: $0.40
P-SP4-477 Tube Base - 4-Pin
$4.36
Save 11%
Originally: $4.90
P-SP4-477C Tube Base - 4-Pin, Ceramic
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
$5.12
Save 11%
Originally: $5.75
P-SP8-476 Tube Base - 8 Pin, Octal, Black
Used for octal plug or coil form. 1-¼" dia. x 7/8" high.
$3.03
Save 11%
Originally: $3.41
P-SP8-477 Tube Base - 8 Pin, Gold Coated Pins, 1.57" diameter
8 pin tube base with gold coated pins.
Outer Diameter: 1.57"
Inner Diameter: 1.52"
Height (not including pins or keyway): 0.80"
$3.59
Save 11%
Originally: $4.03
P-SP8-478 Tube Base - 8 Pin, Gold Coated Pins, 1.20" diameter
8 pin tube base with gold pins.
Outer Diameter: 1.20"
Inner Diameter: 1.16"
Height (not including pins or keyway): 0.79"
$3.59
Save 11%
Originally: $4.03
P-SP8-479 Tube Base - 8 Pin, Octal, Brown
8 pin octal tube base, brown.
Inside Diameter = 1 3/16"
Height = 7/8"
$3.03
Save 11%
Originally: $3.41
P-SP8-500 Plug - 8-Pin octal tube base, Black Plastic
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
$1.67
Save 11%
Originally: $1.88
P-SPACERS Spacers - Metal, Grab Bag, 20 pieces
Package of 20
Assortment of metal 'stand off' spacers. 20 pieces.
$0.89
Save 11%
Originally: $1.00
P-SS9-161 Tube Shield - 9 Pin Mini, Bayonet, J Slot, 1-½" Tall, Aluminum
NOS (Eby) aluminum tube shield (no base), spring loaded, for short 9 pin miniature tubes like NOS 6386 with 1.50" seated height. (Too short to fit more common 9 pin miniature tubes like 12AX7 with 1.94" seated height).
$0.31
Save 11%
Originally: $0.35
P-SS9-162 Tube Shield - 9 Pin Miniature, 1-½" Tall with Bayonet Base
Made in China. Aluminum tube shield (with base), spring loaded, for short 9 pin miniature tubes like NOS 6386 with 1.50" seated height. (Too short to fit more common 9 pin miniature tubes like 12AX7 with 1.94" seated height).
$1.38
Save 11%
Originally: $1.55
P-SS9-325-X Tube shield - for 9-pin miniature, aluminum, multiple colors
Colors Available:
Protect your preamp tubes and customize them to suit your style with these colorful aluminum tube shields.
Starting at $1.05
Save 11%
Originally: $1.18
P-SS9-325XL Tube Shield - For 9-Pin, Aluminum, Extra Long
Extra long (70mm) aluminum tube shield for noval tubes. Ideal for tubes that are longer than a standard preamp tube such as the 6CG7, 12BH7, etc.
  • Includes shield base
  • Designed for longer than standard pre-amp tubes
  • Sold individually
  • Compatible with P-ST9-212
$1.38
Save 11%
Originally: $1.55
P-SS9-400 Tube Shield - High Quality, Fits P-ST9-700 with Spring
New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.
$1.74
Save 11%
Originally: $1.95
P-SS9-600 Tube Shield - Belton, Push Twist for Socket P-ST9-AWS
2" tall, for use with P-ST9-AWS. Push/twist to chassis, no mounting centers. Belton manufacture. Aluminum sleeve with natural coil spring. Spring length: 26mm
$2.45
Save 11%
Originally: $2.75
P-SS9-601 Tube Shield - 2", China
2" tall, for use with P-ST9-AWS or P-ST9-AWS-CHINA
$2.31
Save 11%
Originally: $2.60
Don't see what you're looking for? Send us your product suggestions!