Vacuum Tube Accessories

S-B247X Tube Boxes - generic, for storing vacuum tubes
Heavy plain white boxes with dividers to cushion tube. Minimum order of 10 per size.
Starting at $0.19
A minimum order of at least 10 is required.
P-SBRKT2 Bracket - for 9 Pin vacuum tube socket
Washer fits around sockets to hold them to chassis.
$0.50
P-SH2-104-2 Washer - Wavy, for P-ST8-810 mounting
Works with P-ST8-810 for mounting without screws.
$0.60
P-SBRKT Bracket - for 8 Pin vacuum tube sockets
Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.
$0.62
P-ST7-815 Socket - 7 Pin, Miniature, Ceramic, with Shield Base
7-pin tube socket with shield base commonly used for preamp tubes
  • Top mount
  • 5/8” chassis hole required
  • 7/8” mounting centers
  • Shield Base
$0.94
P-ST9-MAG Socket - 9 Pin, Ceramic, Magnoval, bottom or top mount
9-pin premium ceramic tube socket used for magnoval (EL504/EL519 size) base tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for vintage amplifiers and other equipment.
$0.95
P-ST7-816 Socket - 7 Pin, Miniature, Ceramic, with Aluminum Shield
7-pin tube socket commonly used for preamp tubes. Shield Included.
  • Top mount
  • 1-7/8” shield height
  • 5/8” chassis hole required
  • 7/8” mounting centers
  • Includes Shield
$1.13
P-SG11X Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $1.15
P-ST9-511 Socket - 9 pin miniature, ceramic, bottom or top mount
Ceramic tube socket commonly used for preamp tubes or EL84 power tubes.
  • Chassis hole: 7/8”
  • Mounting Centers: 1-1/8”
  • Bottom or top mount
$1.38
P-ST9-224 Socket - 9 Pin, PC Mount, Black Plastic
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • ¾” chassis hole required (bottom mount)
  • 3/4” tail diameter
$1.39
P-ST9-212 Socket - 9 Pin, Ceramic with Center Shield and Shield Base
9-pin ceramic tube socket with attached shield base commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • P-SS9-325 and P-SS9-325XL are compatible tube shields.
$1.56
P-ST9-301 Socket - 9 Pin, Ceramic with Center Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.56
P-ST9-302 Socket - 9 Pin, Ceramic with Center Shield, Top Mount
9-pin ceramic tube socket with center shield commonly used for preamp tubes or EL84 power tubes
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.56
P-ST9-400 Socket - 9 Pin, Miniature, Ceramic, Chassis Mount
9-pin tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom mount
  • 1-15/16” shield height
  • 25/32”/ .76” chassis hole required
  • 1-1/8” mounting centers
$1.56
P-ST9-300 Socket - 9 Pin, Plastic, ¾" mounting hole, top mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers

Please note: This socket will not work with tube retainer S-H144
$1.65
P-SH12-1-31 Mounting Plate - for wavy washer sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.86
P-SP8-500 Plug - 8-Pin octal tube base, Black Plastic
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
$1.88
P-ST9-215 Socket - 9 Pin, Miniature, Plastic, PC Mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes.
  • Standoff, PC mount
  • 3/4” tail diameter
$1.88
P-ST8-801 Socket - 8 Pin Octal, Ceramic, with Separate Retaining Ring
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • Spade type pins
  • 1-1/16” to 1-1/8” chassis hole required
  • 1-7/16” oblong mounting centers
$1.95
P-ST9-217X Socket - 9 Pin, Ceramic, PC Mount, bottom or PC mount
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom, PC mount
  • ¾” chassis hole required
  • ¾” tail diameter
Starting at $1.95
P-ST7-814 Socket - 7 Pin, Miniature, Ceramic with Mounting Ring
Ceramic 7-pin socket with center shield and mounting bracket.
  • Convenient top or bottom mounting capabilities
  • 5/8” chassis hole required
  • 7/8” mounting centers
$2.19
P-ST9-213 Socket - 9 Pin, Miniature, with Shielded Base
9-pin phenolic tube socket with attached shield base.
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket
$2.19
P-ST9-213-PC Socket - 9 Pin, Miniature, PC mount, with Shielded Base
Top mount, mounting centers = 1", chassis hole = ¾".
$2.19
P-ST9-214X Socket - 9 Pin, Miniature, Ceramic PC, China
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 13/16” tail diameter
  • Available with standard or gold pins
Starting at $2.19
Don't see what you're looking for? Send us your product suggestions!