Vacuum Tube Accessories

P-ST9-212 Socket - 9 Pin, Ceramic with Center Shield and Shield Base
9-pin ceramic tube socket with attached shield base commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • P-SS9-325 and P-SS9-325XL are compatible tube shields.
$1.56
P-SP8-477 Tube Base - 8 Pin, Gold Coated Pins, 1.57" diameter
8 pin tube base with gold coated pins.
Outer Diameter: 1.57"
Inner Diameter: 1.52"
Height (not including pins or keyway): 0.80"
$4.03
On Backorder
P-SP8-500 Plug - 8-Pin octal tube base, Black Plastic
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
$1.88
P-ST9-164 Socket - 9 Pin, Ceramic, PC Mount with Aluminum Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount with PC pins
  • 1-15/16” shield height
  • 7/8” chassis hole required
  • 1” mounting centers
  • 13/16” tail diameter
  • Includes shield
$2.81
P-SG11X Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $0.62
P-ST4-191 Socket - 4 Pin, Ceramic Plate
Bottom mount ceramic socket has bossed mounting holes and recessed rivets to allow sub-panel mounting. Socket fits 300B, 811 size tubes.
$4.94
P-ST9-AWS-C Socket - 9 Pin, Ceramic, for Auto-Wave Soldering
9-pin ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.81
P-ST8-2000 Socket Saver - 8-Pin with Bracket
8 pin socket saver with bracket. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$11.95
P-SP8-479 Tube Base - 8 Pin, Octal, Brown
8 pin octal tube base, brown.
Inside Diameter = 1 3/16"
Height = 7/8"
$3.41
P-ST9-221G Socket - 9 Pin, Ceramic, PC Mount, Gold Pins
9-pin ceramic tube socket with gold pins commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 7/8” tail diameter
  • Gold pins
$3.69
P-ST8-800 Socket - 8 Pin Octal, Ceramic
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • 1-1/16” to 1-1/8” chassis hole required
  • 1-7/16” oblong mounting centers
$2.44
P-SH12-1-31 Mounting Plate - for sockets
When hole in chassis is too large to mount Type s sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.86
P-SP4-477 Tube Base - 4-Pin
$4.90
P-SP8-478 Tube Base - 8 Pin, Gold Coated Pins, 1.20" diameter
8 pin tube base with gold pins.
Outer Diameter: 1.20"
Inner Diameter: 1.16"
Height (not including pins or keyway): 0.79"
$4.03
P-ST9-215 Socket - 9 Pin, Miniature, Plastic, PC Mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes.
  • Standoff, PC mount
  • 3/4” tail diameter
$1.88
P-ST9-AWS Socket - Belton, 9 Pin, for Auto-Wave Soldering
Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.
  • 3/4” PC hole
  • 1-1/8” mounting centers

Features:
  • Safety attachment with 3 positions of mounting pins
  • Easy mount with the precise designed tube pins
  • Glassfiber filled PPS insulating material
$2.75
P-SS9-162 Tube Shield - 9 Pin Miniature, 1-½" Tall with Bayonet Base
Made in China. Aluminum tube shield (with base), spring loaded, for short 9 pin miniature tubes like NOS 6386 with 1.50" seated height. (Too short to fit more common 9 pin miniature tubes like 12AX7 with 1.94" seated height).
$1.55
P-ST9-700-PC Socket - Belton, 9 Pin, Crimped with Shield Base, PC mount
Belton 9-pin tube socket, crimped with shield base. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Top mount, PC pins
  • 3/4” tail diameter
  • 1-1/8” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with collar attached socket
$2.95
P-ST9-AWS-CHINA Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.44
P-ST9-213-PC Socket - 9 Pin, Miniature, PC mount, with Shielded Base
Top mount, mounting centers = 1", chassis hole = ¾".
$2.31
P-SBRKT2 Bracket - for 9 Pin Socket
Washer fits around sockets to hold them to chassis.
$0.50
P-ST7-813 Socket - 7 Pin, Large, Ceramic for 813, Chinese
7-pin ceramic plate socket used for 813 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting. Made in China
  • Bottom mount
  • 1 ¼" chassis hole required
  • 1-⅞" x 1-⅞" oblong mounting centers
$4.94
P-ST7-311 Socket - 7 Pin, Ceramic for 1625
7-pin ceramic plate socket used for 1625 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .
  • Bottom mount
  • 1”- 1 ¼" chassis hole required
  • 1-13/16” oblong mounting centers
$4.94
P-TB9-MK3 Terminal Board - 2 x 9 Pin Socket, for Dynaco Mark III
For Dynaco Mark III. Dual socket, 2 rows/11 lugs per row, 4 mounting holes. Board dimension 4.25" x 3.45". 0.125" thickness.
$25.75
Don't see what you're looking for? Send us your product suggestions!