Vacuum Tube Accessories

P-ST9-AWS Socket - Belton, 9 Pin, for Auto-Wave Soldering
Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.
  • 3/4” PC hole
  • 1-1/8” mounting centers

Features:
  • Safety attachment with 3 positions of mounting pins
  • Easy mount with the precise designed tube pins
  • Glassfiber filled PPS insulating material
$2.75
P-ST9-601 Socket - Belton, 9 Pin, Miniature, Bottom Mount
Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
  • Chassis hole: ¾”
  • Mounting Centers: 1-1/8”
  • Bottom mount

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.95
P-ST9-600 Socket - Belton, 9 Pin, Miniature, Top Mount
9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with collar attached socket
  • 1-⅛" mounting centers
  • Fits ¾" chassis hole
  • Top mount
$2.95
P-ST8-209MIP Socket - Belton, Micalex, 8 pin octal, MIP
High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:
  • Panel saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorus bronze terminal pin with solder plating
  • Glassfiber filled PPS insulating material.
$3.50
P-ST8-209MIPPCL Socket - Belton, Micalex, 8 Pin, Octal PC Mount, Long Lead
Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” oblong mounting centers

Features:
  • Paddle saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Long leads
$3.50
P-ST7-222 Socket -7 Pin, Miniature, Standoff Ceramic PC Mount
7-pin ceramic tube socket with PC pins commonly used for tubes such as the 6X4 rectifier.
  • PC mount
  • 11/16” chassis hole required
  • 11/16" tail diameter
$2.19
P-ST8-1000 Socket Saver - 8-Pin
8 pin octal socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$9.95
P-ST8-2000 Socket Saver - 8-Pin with Bracket
8 pin socket saver with bracket. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$11.95
P-ST9-900 Socket Saver - 9 Pin Miniature
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.06
T-SSR01 Solid State Rectifier - For 5AR4, 5U4, 5Y3 Tubes
Solid State Rectifier Direct plug-in replacement for 5AR4, 5U4 and 5Y3 rectifier vacuum tubes in amplifiers with center tapped secondary power transformer. Use when less 'sag' is desired in the power supply; just switch back to the tube rectifier when 'sag' is desired.
$9.95
P-YJR Solid State Rectifier - Yellow Jackets® YJR, For 5AR4, 5U4, 5Y3
The YJR is a direct plug-in replacement adapter for use in most amplifiers that use 5AR4/GZ34, 5U4, 5Y3 or similar full-wave rectifier tubes. The YJR converts your amp's vacuum tube rectifier to a solid state rectifier, reducing tube sag for a tighter sound and feel. The tube rectifier can easily be swapped back in when sag is desired. This Yellow Jacket® is a solid state device and as such does not come with vacuum tubes.
  • Converts most audio amplifiers which use a vacuum tube rectifier 5AR4/GZ34, 5U4 or 5Y3 to a solid state device.
  • Safe for all common amplifiers and transformers.

All Yellow Jackets® have a one year warranty against manufacturer defects.
$14.95
P-SPACERS Spacers - Metal, Grab Bag, 20 pieces
Package of 20
Assortment of metal 'stand off' spacers. 20 pieces.
$1.00
S-H172X Standoff - #6-32, Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X
$2.20
S-H170X Standoff - #6-32, Male-Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X
Starting at $2.25
P-TB8-1-2 Terminal Board - 1 x 8 Pin Socket
Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.
$18.95
P-TB9-1-3 Terminal Board - 1 x 9 Pin Socket
Single socket. 3 rows/6 lugs per row, 6 mounting holes. Board dimensions 3 ¾" x 3". Terminals are not pre-wired.
$24.25
P-TB8-2-2 Terminal Board - 2 x 8 Pin Socket
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$33.95
P-TB9-2-2 Terminal Board - 2 x 9 Pin Socket, 2 rows of lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$27.50
P-TB9-2-3 Terminal Board - 2 x 9 Pin Socket, 3 rows of lugs
Dual socket. 3 rows/10 lugs per row, 4 mounting holes. Board dimensions 5 ½" x 3 ¾". Terminals are not pre-wired.
$34.95
P-TB9-MK3 Terminal Board - 2 x 9 Pin Socket, for Dynaco Mark III
For Dynaco Mark III. Dual socket, 2 rows/11 lugs per row, 4 mounting holes. Board dimension 4.25" x 3.45". 0.125" thickness.
$25.75
P-TB9-3-2 Terminal Board - 3 x 9 Pin Socket
Three socket. 2 rows/ 14 lugs per row, 6 mounting holes. Board dimensions 6 ¾" x 3". Terminals are not pre-wired.
The distance between tube socket centers is 2.18".
$40.25
P-TC4-1 Terminal Strip - Ceramic, 1 Row, 4 slots, 2.5mm thread
Ceramic terminal strip, 1 row, 4 slots, 2.5mm thread.
$3.24
S-TVBV Tool - Vacuum Base Vise, 40mm
Mini vise. Great for securing small, light-weight components like potentiometers, tube sockets and switches while soldering or de-soldering. Clamp opens to 40 mm max.
$6.95
P-SP4-477 Tube Base - 4-Pin
$4.90
Don't see what you're looking for? Send us your product suggestions!