Vacuum Tube Accessories

P-ST9-900 Socket Saver - 9 Pin Miniature, for reducing wear and tear
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.06
On Backorder
P-ST9-AWS Socket - Belton, 9 Pin, for Auto-Wave Soldering
Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.
  • 3/4” PC hole
  • 1-1/8” mounting centers

Features:
  • Safety attachment with 3 positions of mounting pins
  • Easy mount with the precise designed tube pins
  • Glassfiber filled PPS insulating material
$2.75
P-ST9-AWS-C Socket - 9 Pin, Ceramic, for Auto-Wave Soldering
9-pin ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.81
P-ST9-AWS-CHINA Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.44
P-STKY-1 Keyway - Replacement piece for octal tubes
Package of 4
Do you have valuable octal type tubes that work fine except the keyway has been broken off the base? Fix it with this simple and inexpensive product. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.
$10.00
P-TB8-1-2 Terminal Board - one 8 Pin socket, 2 x 6 lugs
Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.
$18.95
P-TB8-2-2 Terminal Board - two 8 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$33.95
P-TB9-1-3 Terminal Board - one 9 Pin socket, 3 x 6 lugs
Single socket. 3 rows/6 lugs per row, 6 mounting holes. Board dimensions 3 ¾" x 3". Terminals are not pre-wired.
$24.25
On Backorder
P-TB9-2-2 Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$27.50
P-TB9-2-3 Terminal Board - two 9 Pin sockets, 3 x 10 lugs
Dual socket. 3 rows/10 lugs per row, 4 mounting holes. Board dimensions 5 ½" x 3 ¾". Terminals are not pre-wired.
$34.95
P-TB9-3-2 Terminal Board - three 9 Pin sockets, 2 x 14 lugs
Three socket. 2 rows/ 14 lugs per row, 6 mounting holes. Board dimensions 6 ¾" x 3". Terminals are not pre-wired. The distance between tube socket centers is 2.18".
$40.25
P-TB9-MK3 Terminal Board - two 9 Pin sockets, for Dynaco Mark III
For Dynaco Mark III. Dual socket, 2 rows/11 lugs per row, 4 mounting holes. Board dimension 4.25" x 3.45". 0.125" thickness.
$25.75
P-YJR Solid State Rectifier - Yellow Jackets® YJR, For 5AR4, 5U4, 5Y3
The YJR is a direct plug-in replacement adapter for use in most amplifiers that use 5AR4/GZ34, 5U4, 5Y3 or similar full-wave rectifier tubes. The YJR converts your amp's vacuum tube rectifier to a solid state rectifier, reducing tube sag for a tighter sound and feel. The tube rectifier can easily be swapped back in when sag is desired. This Yellow Jacket® is a solid state device and as such does not come with vacuum tubes.
  • Converts most audio amplifiers which use a vacuum tube rectifier 5AR4/GZ34, 5U4 or 5Y3 to a solid state device.
  • Safe for all common amplifiers and transformers.

All Yellow Jackets® have a one year warranty against manufacturer defects.
$14.95
P-OH-507 Socket - Leslie, 6 Pin Female, wavy washer
6 pin female socket with wavy washer, for Leslies.
$26.95
P-SBRKT Bracket - for 8 Pin vacuum tube sockets
Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.
$0.62
P-SBRKT2 Bracket - for 9 Pin vacuum tube socket
Washer fits around sockets to hold them to chassis.
$0.50
P-SG11X Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $0.62
P-SH12-1-31 Mounting Plate - for wavy washer sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.86
P-SH2-104-2 Washer - Wavy, for P-ST8-810 mounting
Works with P-ST8-810 for mounting without screws.
$0.60
P-SP4-477 Tube Base - 4 pin replacement, 1.36" diameter
Replacement 4-pin tube base for use with tubes such as the 811A or 300B.
$4.90
P-SP4-477C Tube Base - 4 pin, ceramic, 1.25" diameter
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
$2.83
Save 51%
Originally: $5.75
P-SP8-47X Tube Base - 8 Pin octal, 1.25" diameter
Colors Available:
Used for vacuum tube octal plug or coil form. 1-¼" dia. x 7/8" high.
$3.41
P-SP8-477 Tube Base - 8 Pin, Gold Coated Pins, 1.57" diameter
8 pin tube base with gold coated pins.
Outer Diameter: 1.57"
Inner Diameter: 1.52"
Height (not including pins or keyway): 0.80"
$4.03
P-SP8-478 Tube Base - 8 Pin, Gold Coated Pins, 1.20" diameter
8 pin tube base with gold pins.
Outer Diameter: 1.20"
Inner Diameter: 1.16"
Height (not including pins or keyway): 0.79"
$4.03
Don't see what you're looking for? Send us your product suggestions!