Vacuum Tube Accessories

Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.

• 3/4” PC hole
• 1-1/8” mounting centers

Features:

• Safety attachment with 3 positions of mounting pins
• Easy mount with the precise designed tube pins
• Glassfiber filled PPS insulating material

7-pin ceramic plate socket used for 6C33B,829B and 3E29 sized tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .

• Bottom mount
• 1 ¼" chassis hole required
• 1-⅞" x 1-⅞" oblong mounting centers

9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes

• PC mount
• ¾” chassis hole required (bottom mount)
• 3/4” tail diameter

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”)
• Mounting Centers: 1-1/2” with oblong mounting holes

9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:

• Center PCB hole diameter -0.73"
• Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")

Ceramic 7-pin socket with center shield and mounting bracket.

• Convenient top or bottom mounting capabilities
• 5/8” chassis hole required
• 7/8” mounting centers

9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes

• Top mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

Please note: This socket will not work with tube retainer S-H144

Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• 1-1/8” / 1.14” chassis hole required
• Snap-in Mounting

*Uses P-SH12-1-31 or P-SH2-104-2

8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.

• PC mount
• 1” tail diameter
• Available with standard or gold pins

9-pin ceramic tube socket with center shield commonly used for preamp tubes or EL84 power tubes

• Top mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
• Mounting Centers: 1-1/2” with oblong mounting holes

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 7/8” chassis hole required
• 1-1/8” mounting centers
• Includes shield

High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:

• Panel saddle mounting
• Easy mount with the saddle of extruded screw hole
• Phosphorus bronze terminal pin with solder plating
• Glassfiber filled PPS insulating material.

Ceramic tube socket commonly used for preamp tubes or EL84 power tubes.

• Chassis hole: 7/8”
• Mounting Centers: 1-1/8”
• Bottom or top mount

7-pin tube socket commonly used for preamp tubes. Shield Included.

• Top mount
• 1-7/8” shield height
• 5/8” chassis hole required
• 7/8” mounting centers
• Includes Shield

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 3/4” chassis hole required
• 1-1/8” mounting centers
• Includes shield

Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.

• Convenient top or bottom mount capabilities
• 1-1/4” chassis hole required
• 1-1/2” oblong mounting centers

Features:

• Paddle saddle mounting
• Easy mount with the saddle of extruded screw hole
• Phosphorous bronze pin terminal with tin plating
• Glassfiber filled PPS Insulating material
• Long leads

Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.

• Chassis hole: ¾”
• Mounting Centers: 1-1/8”
• Bottom mount

Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber fileld PPS Insulating material
• Easy mount with collar attached socket

Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes. This version has circular extruded holes.

9-pin phenolic tube socket with attached shield base.

• Top mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket

Plastic octal tube socket commonly used for power tubes in many amps.

• Chassis hole: 1 ⅛"
• Mounting Centers: 1 ½"
• Bottom mount

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes. Features:

• Top mount
• 3/4” tail diameter
• 1-1/8” mounting center

Works with P-ST8-810 for mounting without screws.