Vacuum Tube Accessories

7-pin tube socket with shield base commonly used for preamp tubes

• Top mount
• 5/8” chassis hole required
• 7/8” mounting centers
• Shield Base

7-pin ceramic tube socket with PC pins commonly used for tubes such as the 6X4 rectifier.

• PC mount
• 11/16” chassis hole required
• 11/16" tail diameter

8-pin premium ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.

• Premium quality
• Convenient top or bottom mount capabilities
• Includes mounting bracket
• 1-1/16” chassis hole required
• 1-7/16” oblong mounting centers

Ceramic socket for loctal (sometimes spelled loktal) tubes such as the T-35Z3 rectifier. These loctal sockets have eight eyelets for the outside pins and an eyelet for the large center pin. Chassis hole details:

• 1” to 1.1875” depending on mounting
  
  • 1” hole for bottom mounting
  • 1.1875” hole for top mounting
• 1.5” mounting centers with oblong mounting holes

Ceramic Tube socket used for octal power tubes, PC mount

• Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/8”, Bottom: 1-1/4”)
• Mounting Centers: 1-1/2” with oblong mounting holes
• PC mount pins

8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.

• PC mount
• 1” tail diameter
• Available with standard or gold pins

8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.

• Convenient top or bottom mount capabilities
• Includes mounting bracket
• 1-1/16” to 1-1/8” chassis hole required
• 1-7/16” oblong mounting centers

8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.

• Convenient top or bottom mount capabilities
• Includes mounting bracket
• Spade type pins
• 1-1/16” to 1-1/8” chassis hole required
• 1-7/16” oblong mounting centers

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
• Mounting Centers: 1-1/2” with oblong mounting holes

Plastic octal tube socket commonly used for power tubes in many amps.

• Chassis hole: 1 ⅛"
• Mounting Centers: 1 ½"
• Bottom mount

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1-1/16” chassis hole required
• 1 ½" mounting centers

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”)
• Mounting Centers: 1-1/2” with oblong mounting holes

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Bottom mount
• Includes mounting bracket
• 1” chassis hole required
• 1 ¼" mounting centers

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• 1-1/8” / 1.14” chassis hole required
• Snap-in Mounting

*Uses P-SH12-1-31 or P-SH2-104-2

8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1 3/16" to 1 ¼".chassis hole required
• 1-1/2” mounting centers

*Please Note: The S-H142 tube clip is not compatible with this socket.

8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1” to 1-1/8” chassis hole required
• 1-1/2” mounting centers

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 7/8” chassis hole required
• 1-1/8” mounting centers
• Includes shield

Ceramic tube socket commonly used for preamp tubes or EL84 power tubes.

• Chassis hole: 7/8”
• Mounting Centers: 1-1/8”
• Bottom or top mount

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes. Features:

• Top mount
• 3/4” tail diameter
• 1-1/8” mounting center

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.

• Top mount
• 3/4” chassis hole required
• 1” mounting centers

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 3/4” chassis hole required
• 1-1/8” mounting centers
• Includes shield

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes

• Bottom mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

9-pin ceramic tube socket with attached shield base commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 7/8” chassis hole required
• 1-1/8” mounting centers
• P-SS9-325 and P-SS9-325XL are compatible tube shields.

9-pin ceramic tube socket with center shield commonly used for preamp tubes or EL84 power tubes

• Top mount
• 3/4” chassis hole required
• 1-1/8” mounting centers