Vacuum Tube Accessories

P-ST9-601 Socket - Belton, 9 Pin, Miniature, Bottom Mount
Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
  • Chassis hole: ¾”
  • Mounting Centers: 1-1/8”
  • Bottom mount

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.95
P-ST8-600 Socket - 8 Pin, Phenolic
8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1” to 1-1/8” chassis hole required
  • 1-1/2” mounting centers
$4.69
P-ST9-162 Socket - 9 Pin Miniature, Ceramic Base, Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
$3.06
P-ST9-165 Socket - 9 Pin, Ceramic Base with Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
$3.06
P-ST8-250MB Socket - 8 Pin Octal, Saddle Plate, Black, Bottom Mount
Plastic octal tube socket commonly used for power tubes in many amps.
  • Chassis hole: 1 ⅛"
  • Mounting Centers: 1 ½"
  • Bottom mount
$3.69
P-ST8-193X Socket - 8 Pin Octal, Ceramic PC Mount
8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • PC mount
  • 1” tail diameter
  • Available with standard or gold pins
Starting at $2.44
P-ST9-217X Socket - 9 Pin, Ceramic, PC Mount
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom, PC mount
  • ¾” chassis hole required
  • ¾” tail diameter
Starting at $1.95
P-SP8-500 Plug - 8-Pin octal tube base, Black Plastic
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
$1.88
P-SG11X Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $0.62
P-ST9-301 Socket - 9 Pin, Ceramic with Center Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.56
P-ST9-620 Socket - Belton, 9 Pin PC Mount Standoff
(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.75
P-ST8-801 Socket - 8 Pin Octal, Ceramic, with Separate Retaining Ring
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • Spade type pins
  • 1-1/16” to 1-1/8” chassis hole required
  • 1-7/16” oblong mounting centers
$1.95
P-ST7-816 Socket - 7 Pin, Miniature, Ceramic, with Aluminum Shield
7-pin tube socket commonly used for preamp tubes. Shield Included.
  • Top mount
  • 1-7/8” shield height
  • 5/8” chassis hole required
  • 7/8” mounting centers
  • Includes Shield
$1.13
P-ST8-809 Socket - 8 Pin Octal, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
  • Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
$2.44
P-ST8-250MT Socket - 8 Pin Octal, Saddle Plate, Black, Top Mount
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1-1/16” chassis hole required
  • 1 ½" mounting centers
$3.69
P-ST8-1000 Socket Saver - 8-Pin
8 pin octal socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$9.95
P-ST9-212 Socket - 9 Pin, Ceramic with Center Shield and Shield Base
9-pin ceramic tube socket with attached shield base commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • P-SS9-325 and P-SS9-325XL are compatible tube shields.
$1.56
P-ST9-900 Socket Saver - 9 Pin Miniature
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.06
On Backorder
P-ST9-302 Socket - 9 Pin, Ceramic with Center Shield, Top Mount
9-pin ceramic tube socket with center shield commonly used for preamp tubes or EL84 power tubes
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.56
P-ST9-610 Socket - 9 Pin, Chassis Mount
9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Top mount
  • 3/4” chassis hole required
  • 1” mounting centers
$3.69
P-ST9-213 Socket - 9 Pin, Miniature, with Shielded Base
9-pin phenolic tube socket with attached shield base.
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket
$2.19
P-ST4-194 Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
  • Bottom mount
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers
$3.13
P-ST7-222 Socket -7 Pin, Miniature, Standoff Ceramic PC Mount
7-pin ceramic tube socket with PC pins commonly used for tubes such as the 6X4 rectifier.
  • PC mount
  • 11/16” chassis hole required
  • 11/16" tail diameter
$2.19
P-ST8-210M Socket - 8 Pin, 1" Chassis Hole, 1-¼" Mounting Centers
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Bottom mount
  • Includes mounting bracket
  • 1” chassis hole required
  • 1 ¼" mounting centers
$4.06
Don't see what you're looking for? Send us your product suggestions!