Vacuum Tube Accessories

Adapters

Tube adapters have many applications; allowing use of less expensive tube types, changing the tone of your amp or for use as a socket saver.
S-H170X Standoff - #6-32, Male-Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X
Starting at $2.25
S-H172X Standoff - #6-32, Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X
$2.20
P-STKY-1 Keyway - Replacement piece for octal tubes
Package of 4
Do you have valuable octal type tubes that work fine except the keyway has been broken off the base? Fix it with this simple and inexpensive product. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.
$10.00
P-ST9-601 Socket - Belton, 9 Pin, Miniature, Bottom Mount
Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
  • Chassis hole: ¾”
  • Mounting Centers: 1-1/8”
  • Bottom mount

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.95
P-ST9-162 Socket - 9 Pin Miniature, Ceramic Base, Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
$3.06
P-YJR Solid State Rectifier - Yellow Jackets® YJR, For 5AR4, 5U4, 5Y3
The YJR is a direct plug-in replacement adapter for use in most amplifiers that use 5AR4/GZ34, 5U4, 5Y3 or similar full-wave rectifier tubes. The YJR converts your amp's vacuum tube rectifier to a solid state rectifier, reducing tube sag for a tighter sound and feel. The tube rectifier can easily be swapped back in when sag is desired. This Yellow Jacket® is a solid state device and as such does not come with vacuum tubes.
  • Converts most audio amplifiers which use a vacuum tube rectifier 5AR4/GZ34, 5U4 or 5Y3 to a solid state device.
  • Safe for all common amplifiers and transformers.

All Yellow Jackets® have a one year warranty against manufacturer defects.
$14.95
P-ST9-620 Socket - Belton, 9 Pin PC Mount Standoff
(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.75
P-ST9-165 Socket - 9 Pin, Ceramic Base with Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
$3.06
T-SSR01 Solid State Rectifier - For 5AR4, 5U4, 5Y3 Tubes
Solid State Rectifier Direct plug-in replacement for 5AR4, 5U4 and 5Y3 rectifier vacuum tubes in amplifiers with center tapped secondary power transformer. Use when less 'sag' is desired in the power supply; just switch back to the tube rectifier when 'sag' is desired.
$9.95
P-ST9-217X Socket - 9 Pin, Ceramic, PC Mount
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom, PC mount
  • ¾” chassis hole required
  • ¾” tail diameter
Starting at $1.95
P-ST9-900 Socket Saver - 9 Pin Miniature
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.06
P-ST9-610 Socket - 9 Pin, Chassis Mount
9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Top mount
  • 3/4” chassis hole required
  • 1” mounting centers
$3.69
P-ST8-1000 Socket Saver - 8-Pin
8 pin octal socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$9.95
P-ST9-301 Socket - 9 Pin, Ceramic with Center Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.56
P-ST9-302 Socket - 9 Pin, Ceramic with Center Shield, Top Mount
9-pin ceramic tube socket with center shield commonly used for preamp tubes or EL84 power tubes
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.56
P-ST9-212 Socket - 9 Pin, Ceramic with Center Shield and Shield Base
9-pin ceramic tube socket with attached shield base commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • P-SS9-325 and P-SS9-325XL are compatible tube shields.
$1.56
P-ST9-213 Socket - 9 Pin, Miniature, with Shielded Base
9-pin phenolic tube socket with attached shield base.
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket
$2.19
T-7199-ADT Adapter - Adapts 6GH8A to use Instead of 7199 Tube
This adapter allows you to convert 6GH8A tubes to use instead of the hard to find 7199, 6GH8A not included.
Find the 6GH8A Tube Here
$23.00
P-ST9-214X Socket - 9 Pin, Miniature, Ceramic PC, China
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 13/16” tail diameter
  • Available with standard or gold pins
Starting at $2.19
P-ST9-223 Socket - 9 Pin, Standoff Ceramic PC Mount
9-pin ceramic tube socket with stand-off mounting. commonly used for preamp tubes or EL84 power tubes.
  • Standoff, PC mount
  • 0.822” outer diameter
  • 3/4” tail diameter
$2.19
T-7199-ADT-SET Adapter - use 6GH8A Instead of 7199 tube, 6GH8A Included
Package of 2
Includes:
  • (1) T-7199-ADT
  • (1) T-6GH8A
$26.25
P-YJS-X Tube Converter - Yellow Jackets®, YJS
The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. The YJS is for amps with fixed bias power tubes. (Fixed bias tubes have their cathode connected directly to ground and a negative DC voltage applied to their control grid). All Yellow Jackets® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
Starting at $44.95
Save 0%
Originally: $44.95
P-ST9-224 Socket - 9 Pin, PC Mount, Black Plastic
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • ¾” chassis hole required (bottom mount)
  • 3/4” tail diameter
$1.19
P-ST9-700-PC Socket - Belton, 9 Pin, Crimped with Shield Base, PC mount
Belton 9-pin tube socket, crimped with shield base. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Top mount, PC pins
  • 3/4” tail diameter
  • 1-1/8” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with collar attached socket
$2.95
Don't see what you're looking for? Send us your product suggestions!