Vacuum Tube Accessories

Adapters

Tube adapters have many applications; allowing use of less expensive tube types, changing the tone of your amp or for use as a socket saver.
S-H170X Standoff - #6-32, Male-Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X
Starting at $2.25
S-H172X Standoff - #6-32, Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X
$2.20
P-STKY-1 Keyway - Replacement piece for octal tubes
Package of 4
Do you have valuable octal type tubes that work fine except the keyway has been broken off the base? Fix it with this simple and inexpensive product. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.
$10.00
P-ST9-601 Socket - Belton, 9 Pin, Miniature, Bottom Mount
Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
  • Chassis hole: ¾”
  • Mounting Centers: 1-1/8”
  • Bottom mount

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.95
P-ST9-162 Socket - 9 Pin Miniature, Ceramic Base, Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
$3.06
P-YJR Solid State Rectifier - Yellow Jackets® YJR, For 5AR4, 5U4, 5Y3
The YJR is a direct plug-in replacement adapter for use in most amplifiers that use 5AR4/GZ34, 5U4, 5Y3 or similar full-wave rectifier tubes. The YJR converts your amp's vacuum tube rectifier to a solid state rectifier, reducing tube sag for a tighter sound and feel. The tube rectifier can easily be swapped back in when sag is desired. This Yellow Jacket® is a solid state device and as such does not come with vacuum tubes.
  • Converts most audio amplifiers which use a vacuum tube rectifier 5AR4/GZ34, 5U4 or 5Y3 to a solid state device.
  • Safe for all common amplifiers and transformers.

All Yellow Jackets® have a one year warranty against manufacturer defects.
$14.95
P-ST9-620 Socket - Belton, 9 Pin PC Mount Standoff
(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.75
P-ST8-193X Socket - 8 Pin Octal, Ceramic PC Mount
8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • PC mount
  • 1” tail diameter
  • Available with standard or gold pins
Starting at $2.44
P-ST8-600 Socket - 8 Pin, Phenolic
8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1” to 1-1/8” chassis hole required
  • 1-1/2” mounting centers
$4.69
P-ST9-165 Socket - 9 Pin, Ceramic Base with Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
$3.06
P-ST8-250MB Socket - 8 Pin Octal, Saddle Plate, Black, Bottom Mount
Plastic octal tube socket commonly used for power tubes in many amps.
  • Chassis hole: 1 ⅛"
  • Mounting Centers: 1 ½"
  • Bottom mount
$3.69
T-SSR01 Solid State Rectifier - For 5AR4, 5U4, 5Y3 Tubes
Solid State Rectifier Direct plug-in replacement for 5AR4, 5U4 and 5Y3 rectifier vacuum tubes in amplifiers with center tapped secondary power transformer. Use when less 'sag' is desired in the power supply; just switch back to the tube rectifier when 'sag' is desired.
$9.95
P-ST9-217X Socket - 9 Pin, Ceramic, PC Mount
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom, PC mount
  • ¾” chassis hole required
  • ¾” tail diameter
Starting at $1.95
P-ST8-250MT Socket - 8 Pin Octal, Saddle Plate, Black, Top Mount
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1-1/16” chassis hole required
  • 1 ½" mounting centers
$3.69
P-ST8-801 Socket - 8 Pin Octal, Ceramic, with Separate Retaining Ring
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • Spade type pins
  • 1-1/16” to 1-1/8” chassis hole required
  • 1-7/16” oblong mounting centers
$1.95
P-ST9-900 Socket Saver - 9 Pin Miniature
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.06
P-ST7-816 Socket - 7 Pin, Miniature, Ceramic, with Aluminum Shield
7-pin tube socket commonly used for preamp tubes. Shield Included.
  • Top mount
  • 1-7/8” shield height
  • 5/8” chassis hole required
  • 7/8” mounting centers
  • Includes Shield
$1.13
P-ST8-809 Socket - 8 Pin Octal, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
  • Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
$2.44
P-ST9-610 Socket - 9 Pin, Chassis Mount
9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Top mount
  • 3/4” chassis hole required
  • 1” mounting centers
$3.69
P-ST8-1000 Socket Saver - 8-Pin
8 pin octal socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$9.95
P-ST9-301 Socket - 9 Pin, Ceramic with Center Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.56
P-ST4-194 Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
  • Bottom mount
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers
$3.13
P-ST8-209MIP-PC Socket - Belton, 8 Pin Octal, Micalex, MIP, PC Mount
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom, PC mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with saddle of extruded screw hole
  • Short leads
$3.50
P-ST8-802 Socket - 8 Pin Ceramic, High Quality
8-pin premium ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.
  • Premium quality
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • 1-1/16” chassis hole required
  • 1-7/16” oblong mounting centers
$7.50
Don't see what you're looking for? Send us your product suggestions!