Vacuum Tube Accessories
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $0.56
Save 10%
Originally: $0.62
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
$1.69
Save 10%
Originally: $1.88
8 pin octal tube base, brown.
Inside Diameter = 1 3/16"
Height = 7/8"
Inside Diameter = 1 3/16"
Height = 7/8"
$3.07
Save 10%
Originally: $3.41
Replacement 4-pin tube base for use with tubes such as the 811A or 300B.
$4.41
Save 10%
Originally: $4.90
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
$5.18
Save 10%
Originally: $5.75
Washer fits around sockets to hold them to chassis.
$0.45
Save 10%
Originally: $0.50
Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.
$0.56
Save 10%
Originally: $0.62
8 pin tube base with gold coated pins.
Outer Diameter: 1.57"
Inner Diameter: 1.52"
Height (not including pins or keyway): 0.80"
Outer Diameter: 1.57"
Inner Diameter: 1.52"
Height (not including pins or keyway): 0.80"
$3.63
Save 10%
Originally: $4.03
Used for octal plug or coil form. 1-¼" dia. x 7/8" high.
$3.07
Save 10%
Originally: $3.41
8 pin tube base with gold pins.
Outer Diameter: 1.20"
Inner Diameter: 1.16"
Height (not including pins or keyway): 0.79"
Outer Diameter: 1.20"
Inner Diameter: 1.16"
Height (not including pins or keyway): 0.79"
$3.63
Save 10%
Originally: $4.03