Vacuum Tube Accessories

P-ST9-620 Socket - Belton, 9 Pin PC Mount Standoff
(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.75
P-ST8-193X Socket - 8 Pin Octal, Ceramic PC Mount
8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • PC mount
  • 1” tail diameter
  • Available with standard or gold pins
Starting at $2.44
P-SG11X Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $0.62
P-ST9-217X Socket - 9 Pin, Ceramic, PC Mount
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom, PC mount
  • ¾” chassis hole required
  • ¾” tail diameter
Starting at $1.95
P-SP8-500 Plug - 8-Pin octal tube base, Black Plastic
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
$1.88
P-ST9-900 Socket Saver - 9 Pin Miniature
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.06
P-ST8-209MIP-PC Socket - Belton, 8 Pin Octal, Micalex, MIP, PC Mount
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom, PC mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with saddle of extruded screw hole
  • Short leads
$3.50
P-ST8-209MIPPCL Socket - Belton, Micalex, 8 Pin, Octal PC Mount, Long Lead
Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” oblong mounting centers

Features:
  • Paddle saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Long leads
$3.85
P-ST9-223 Socket - 9 Pin, Standoff Ceramic PC Mount
9-pin ceramic tube socket with stand-off mounting. commonly used for preamp tubes or EL84 power tubes.
  • Standoff, PC mount
  • 0.822” outer diameter
  • 3/4” tail diameter
$2.19
P-ST9-214X Socket - 9 Pin, Miniature, Ceramic PC, China
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 13/16” tail diameter
  • Available with standard or gold pins
Starting at $2.19
P-ST7-222 Socket -7 Pin, Miniature, Standoff Ceramic PC Mount
7-pin ceramic tube socket with PC pins commonly used for tubes such as the 6X4 rectifier.
  • PC mount
  • 11/16” chassis hole required
  • 11/16" tail diameter
$2.19
P-SP8-479 Tube Base - 8 Pin, Octal, Brown
8 pin octal tube base, brown.
Inside Diameter = 1 3/16"
Height = 7/8"
$3.41
P-ST8-807-PC Socket - 8 Pin Octal, ⅞" Fits in 1" Hole with Bracket PC Mount
Ceramic Tube socket used for octal power tubes, PC mount
  • Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/8”, Bottom: 1-1/4”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
  • PC mount pins
$2.44
P-ST9-224 Socket - 9 Pin, PC Mount, Black Plastic
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • ¾” chassis hole required (bottom mount)
  • 3/4” tail diameter
$1.19
P-ST9-700-PC Socket - Belton, 9 Pin, Crimped with Shield Base, PC mount
Belton 9-pin tube socket, crimped with shield base. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Top mount, PC pins
  • 3/4” tail diameter
  • 1-1/8” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with collar attached socket
$2.95
P-ST9-164 Socket - 9 Pin, Ceramic, PC Mount with Aluminum Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount with PC pins
  • 1-15/16” shield height
  • 7/8” chassis hole required
  • 1” mounting centers
  • 13/16” tail diameter
  • Includes shield
$2.81
P-ST9-610-PC Socket - 9 Pin, PC Mount
9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
Features:
  • Top mount
  • 3/4” tail diameter
  • 1-1/8” mounting center
$3.44
P-ST9-AWS Socket - Belton, 9 Pin, for Auto-Wave Soldering
Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.
  • 3/4” PC hole
  • 1-1/8” mounting centers

Features:
  • Safety attachment with 3 positions of mounting pins
  • Easy mount with the precise designed tube pins
  • Glassfiber filled PPS insulating material
$2.75
P-SH12-1-31 Mounting Plate - for sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.86
P-ST9-225 Socket - 9 Pin, Ceramic, PC Mount, with center shield
9-pin ceramic tube socket with center shield lug and PC pins commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 7/8” chassis hole required
  • ⅞" tail diameter
$2.19
P-ST9-221G Socket - 9 Pin, Ceramic, PC Mount, Gold Pins
9-pin ceramic tube socket with gold pins commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 7/8” tail diameter
  • Gold pins
$3.69
P-SH2-104-2 Washer - Wavy
Works with P-ST8-810 for mounting without screws.
$0.60
P-SP4-477 Tube Base - 4-Pin
Replacement 4-pin tube base for use with tubes such as the 811A or 300B.
$4.90
P-SP4-477C Tube Base - 4-Pin, Ceramic
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
$2.83
Save 51%
Originally: $5.75
Don't see what you're looking for? Send us your product suggestions!