Vacuum Tube Accessories

Belton micalex tube socket commonly used for preamp tubes or EL84 power tubes

• Fits ¾" chassis hole diameter
• See P-SS9-400 for a compatible tube shield

High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:

• Panel saddle mounting
• Easy mount with the saddle of extruded screw hole
• Phosphorus bronze terminal pin with solder plating
• Glassfiber filled PPS insulating material.

9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes.

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber filled PPS Insulating material
• Easy mount with collar attached socket
• 1-⅛" mounting centers
• Fits ¾" chassis hole
• Top mount

Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.

• Chassis hole: ¾”
• Mounting Centers: 1-1/8”
• Bottom mount

Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber fileld PPS Insulating material
• Easy mount with collar attached socket

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 3/4” chassis hole required
• 1-1/8” mounting centers
• Includes shield

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• 1-1/8” / 1.14” chassis hole required
• Snap-in Mounting

*Uses P-SH12-1-31 or P-SH2-104-2

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”)
• Mounting Centers: 1-1/2” with oblong mounting holes

Plastic octal tube socket commonly used for power tubes in many amps.

• Chassis hole: 1 ⅛"
• Mounting Centers: 1 ½"
• Bottom mount

Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes. This version has circular extruded holes.

9-pin ceramic tube socket with attached shield base commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 7/8” chassis hole required
• 1-1/8” mounting centers
• P-SS9-325 and P-SS9-325XL are compatible tube shields.

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
• Mounting Centers: 1-1/2” with oblong mounting holes

Ceramic 7-pin socket with center shield and mounting bracket.

• Convenient top or bottom mounting capabilities
• 5/8” chassis hole required
• 7/8” mounting centers

8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.

• Convenient top or bottom mount capabilities
• Includes mounting bracket
• Spade type pins
• 1-1/16” to 1-1/8” chassis hole required
• 1-7/16” oblong mounting centers

8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1” to 1-1/8” chassis hole required
• 1-1/2” mounting centers

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 7/8” chassis hole required
• 1-1/8” mounting centers
• Includes shield

8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1 3/16" to 1 ¼".chassis hole required
• 1-1/2” mounting centers

*Please Note: The S-H142 tube clip is not compatible with this socket.

7-pin tube socket commonly used for preamp tubes. Shield Included.

• Top mount
• 1-7/8” shield height
• 5/8” chassis hole required
• 7/8” mounting centers
• Includes Shield

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes

• Bottom mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Bottom mount
• Includes mounting bracket
• 1” chassis hole required
• 1 ¼" mounting centers

Ceramic tube socket commonly used for preamp tubes or EL84 power tubes.

• Chassis hole: 7/8”
• Mounting Centers: 1-1/8”
• Bottom or top mount

4-pin ceramic tube socket.

• Bottom mount
• 1-1/4” chassis hole required
• 1-1/2” mounting centers

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.

• Top mount
• 3/4” chassis hole required
• 1” mounting centers

8-pin premium ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.

• Premium quality
• Convenient top or bottom mount capabilities
• Includes mounting bracket
• 1-1/16” chassis hole required
• 1-7/16” oblong mounting centers

9-pin phenolic tube socket with attached shield base.

• Top mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket