Vacuum Tube Accessories

15 x 15" egg crate packing box designed for storing tubes. Supplied unassembled. Each size is capable of holding a different number of tubes. For cartons see S-B127X

Heavy plain white boxes with dividers to cushion tube. Minimum order of 10 per size.

Do you have valuable octal type tubes that work fine except the keyway has been broken off the base? Fix it with this simple and inexpensive product. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.

New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.

Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.

• Chassis hole: ¾”
• Mounting Centers: 1-1/8”
• Bottom mount

Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber fileld PPS Insulating material
• Easy mount with collar attached socket

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 7/8” chassis hole required
• 1-1/8” mounting centers
• Includes shield

The YJR is a direct plug-in replacement adapter for use in most amplifiers that use 5AR4/GZ34, 5U4, 5Y3 or similar full-wave rectifier tubes. The YJR converts your amp's vacuum tube rectifier to a solid state rectifier, reducing tube sag for a tighter sound and feel. The tube rectifier can easily be swapped back in when sag is desired. This Yellow Jacket® is a solid state device and as such does not come with vacuum tubes.

• Converts most audio amplifiers which use a vacuum tube rectifier 5AR4/GZ34, 5U4 or 5Y3 to a solid state device.
• Safe for all common amplifiers and transformers.

All Yellow Jackets® have a one year warranty against manufacturer defects.

8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1” to 1-1/8” chassis hole required
• 1-1/2” mounting centers

(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber fileld PPS Insulating material
• Easy mount with collar attached socket

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 3/4” chassis hole required
• 1-1/8” mounting centers
• Includes shield

8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.

• PC mount
• 1” tail diameter
• Available with standard or gold pins

Plastic octal tube socket commonly used for power tubes in many amps.

• Chassis hole: 1 ⅛"
• Mounting Centers: 1 ½"
• Bottom mount

Rubber ring for retainer S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"

Vacuum tube base clip. Grips tube base with teeth to securely hold tube in place. For use with octal sockets with 1-½" mounting centers.

7-pin tube socket commonly used for preamp tubes. Shield Included.

• Top mount
• 1-7/8” shield height
• 5/8” chassis hole required
• 7/8” mounting centers
• Includes Shield

Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.

Solid State Rectifier Direct plug-in replacement for 5AR4, 5U4 and 5Y3 rectifier vacuum tubes in amplifiers with center tapped secondary power transformer. Use when less 'sag' is desired in the power supply; just switch back to the tube rectifier when 'sag' is desired.

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes

• Bottom, PC mount
• ¾” chassis hole required
• ¾” tail diameter

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
• Mounting Centers: 1-1/2” with oblong mounting holes

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1-1/16” chassis hole required
• 1 ½" mounting centers

Extra long (70mm) aluminum tube shield for noval tubes. Ideal for tubes that are longer than a standard preamp tube such as the 6CG7, 12BH7, etc.

• Includes shield base
• Designed for longer than standard pre-amp tubes
• Sold individually
• Compatible with P-ST9-212

8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.

• Convenient top or bottom mount capabilities
• Includes mounting bracket
• Spade type pins
• 1-1/16” to 1-1/8” chassis hole required
• 1-7/16” oblong mounting centers

Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.