Transistors

J201 N-Channel JFET in a TO-92 package. The J201 is designed primarily for low level audio and general purpose applications with high impedance signal sources.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 mA

J201 N-Channel JFET in a TO-92 package made by Siliconix. The J201 is designed primarily for low level audio and general purpose applications with high impedance signal sources.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 mA

Surface mount MMBFJ201 JFETs presoldered to TO-92 adapter boards. Use wire, clipped component leads, or pin headers to easily attach these adapters to PCBs using TO-92 footprints for J201s. These JFETs can be found in many effects pedals, synthesizers, and other projects. The J201 / MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources. The pinout is marked on the PCB and is DSG when facing the component side.

Transistor MJ15015, TO-3 Case, NPN
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V

Transistor MJ15022, TO-3 Case, NPN PowerBase power transistors designed for high power audio, disk head positioners and other linear applications. Features

• High Safe Operating Area (100% Tested) −2 A @ 80 V
• High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc

Transistor MJ15023, TO-3 Case, PNP
PowerBase power transistors designed for high power audio, disk head positioners and other linear applications.
Features

• High Safe Operating Area (100% Tested) −2 A @ 80 V
• High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc

Transistor MJ15025, TO-3 Case The MJ15025 is a power transistor designed for high-power audio, disk head positioners, and other linear applications Features:

• High Safe Operating Area: -2A @ 80 V
• High DC Current Gain hFE = 15 (Min) @ IC = 8 Adc

MPF102 N-Channel JFET in a TO-92 package. The MPF102 is designed for electronic switching applications such as low ON resistance analog switching.

• Max drain to gate voltage = 25 V
• Max gate to source voltage = -25 V
• Max forward gate current = 10 mA

MPS 6531, NPN general purpose amp, 40V, TO-92 Case.

MPS 6533, PNP general purpose amp, 40V, TO-92 Case.

NPN Darlington transistor (TO-92 package) - designed for applications requiring extremely high current gain at collector currents to 1.0A.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 1.2 A (continuous)

MPSA14 NPN Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 0.5 A (continuous)

NPN low noise transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 45 V
• Max collector to base voltage = 45 V
• Max emitter to base voltage = 6.5 V
• Max collector current = 0.2 A (continuous)

MPSA63 PNP Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = -30V
• Max collector to base voltage = -30 V
• Max emitter to base voltage = -10 V
• Max collector current = -0.5 A (continuous)

MPSA63 PNP Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = -30V
• Max collector to base voltage = -30 V
• Max emitter to base voltage = -10 V
• Max collector current = -0.5 A (continuous)

OC139 NPN germanium transistors. The OC139 is a popular NPN for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The NPN polarity allows for use with standard pedal power supplies. The dot indicates the collector lead. The OC139 can be found in the EarthQuaker Devices Bows germanium preamp.

OC43 PNP germanium transistors. The OC43 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

Adzam (Mazda) brand OC45 PNP germanium transistors. The OC45 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

Valvo brand OC45 PNP germanium transistors. The OC45 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

OC46 PNP germanium transistors. The OC46 is a popular PNP for fuzz pedals and boost effects. It can be found in vintage electronics and modern fuzz pedals. This transistor is in a black glass SO-2 package with long leads commonly found on germanium transistors.

PF5102 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 m

Alternistors are specifically designed for applications which are required to switch highly inductive loads. To accomplish this, a special chip has been designed which effectively offers the same performance as two thyristors (SCRs) wired inverse parallel (back to back); hence the alternistor has better turn-off behavior than a standard triac.

Designed for full-wave triggering in Triac phase control circuits, half-wave SCR triggering application and as voltage level detectors. Used in most Peavey linear power amplifier designs through 2000 including CS/M/DECA series power amps, IPA300, and all models using 402/602/304S/204S power modules.

• Low Switching Voltage — 8 Volts Typical
• Uniform Characteristics in Each Direction
• Low On-State Voltage — 1.7 Volts Maximum
• Low Off-State Current — 0.1 mA Maximum

SDS 7204 transistor, 300 V, 10 mA, Case-30.