Transistors

2N5088 NPN Bipolar Junction Transistor in TO-92 package
$0.20

NPN Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.
- Max collector to emitter voltage = 45 V
- Max collector to base voltage = 45 V
- Max emitter to base voltage = 6.5 V
- Max collector current = 0.2 A (continuous)
$0.15

General purpose low level, low noise amplifier. Silicon NPN transistor.
$0.39

General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects.
$0.18

The BC184 is a general purpose NPN transistor in a TO-92 case. The BC184 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. BC184 was used in various Colorsound pedals - Jumbo Tone Bender, Supa Tone Bender, Power Boost, etc. It was also used in the Schaller Fuzz, and has been used in fuzz pedals from well-known builders such as Skreddy Pedals, D*A*M, and Stu Castledine.
$0.30

The BC183 is a general purpose NPN transistor in a TO-92 case. The BC183 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC183 is available in three different gain ranges: BC183A, BC183B, and BC183C. Type hfe (IC=2mA, VCE=5V, f=1KHz) BC183A 125-260 BC183B 240-500 BC183C 450-900
Starting at $0.30

PF5102 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
- Max drain to gate voltage = 40 V
- Max gate to source voltage = -40 V
- Max forward gate current = 50 m
$1.90

2N2222A in a TO-92 package. The 2N2222A is a NPN transistor commonly used in fuzz pedals. Typical Applications:
- Signal processing
- Switching
- Amplification
$0.30

The BC547 is a silicon general purpose NPN transistor in a TO-92 package. The BC547’s typical applications include signal processing, amplification, and switching. The BC547 is available in two different gain ranges: BC547B and BC547C. Type hFE (IC=2mA, VCE=5V) BC547B 200-450 BC547C 420-800
$0.30

General purpose low-power PNP bipolar junction transistor, used frequently in hobbyist electronic projects. For the NPN 2N3904 see P-Q2N3904
$0.28

2N5087 PNP Bipolar Junction Transistor in TO-92 package. For the NPN 2N5087 see P-Q2N5088
$0.28

2N5458 N-channel JFET in a TO-92 package. The 2N5458 is an N−channel junction field effect transistors, depletion mode (Type A), designed for audio and switching applications. Features
- N−Channel for Higher Gain
- Drain and Source Interchangeable
- High AC Input Impedance
- High DC Input Resistance
- Low Transfer and Input Capacitance
- Low Cross−Modulation and Intermodulation Distortion
$1.39

The 2N4125 is a general purpose silicon NPN transistor in a TO-92 case. The 2N4125 is primarily intended for general purpose amplification. It is a popular choice for silicon fuzz pedals due to its low hFE specifications. It has also been used in a variety of classic pedals such as the Phase 90.
$0.25

The BC549 is a silicon general purpose NPN transistor in a TO-92 package. The BC549’s typical applications include signal processing, amplification, and switching. The BC549 is available in two different gain ranges: BC549B and BC549C. Type hFE (IC=2mA, VCE=5V) BC549B 200-450 BC549C 420-800
Starting at $0.30

2N5457 N-Channel JFET in a TO-92 package. The 2N5457 is designed primarily for audio and switching applications.
- Max drain to gate voltage = 25 V
- Max gate to source voltage = -25 V
- Max forward gate current = 10 mA
$1.45

2N7000 N-channel enhancement mode field effect transistors. 2N7000 MOSFETs are used in many DIY projects such as boost and distortion effects pedals.
Features:
Features:
- Voltage Controlled Small Signal Switch
- High Saturation Current Capability
- Rugged and Reliable
- High Density Cell Design for Low RDS(ON)
$0.50

Surface mount MMBFJ201 JFETs presoldered to TO-92 adapter boards. Use wire, clipped component leads, or pin headers to easily attach these adapters to PCBs using TO-92 footprints for J201s. These JFETs can be found in many effects pedals, synthesizers, and other projects. The J201 / MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources. The pinout is marked on the PCB and is DSG when facing the component side.
$1.65

NPN Darlington transistor (TO-92 package) - designed for applications requiring extremely high current gain at collector currents to 1.0A.
- Max collector to emitter voltage = 30 V
- Max collector to base voltage = 30 V
- Max emitter to base voltage = 10 V
- Max collector current = 1.2 A (continuous)
$0.49

MOSFET BS170 N-Channel Transistor. Used in MOD® Kits.
Note - this is a fragile component! Use caution not to overheat or break leads.
Note - this is a fragile component! Use caution not to overheat or break leads.
$1.25

J113 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
- Max drain to gate voltage = 35 V
- Max gate to source voltage = -35 V
- Max forward gate current = 50 mA
$0.49

2N4061 PNP transistors. This is a silicon PNP transistor in a TO-92 package. The 2N4061 has been used in a variety of effects pedals and is most notably used in the Zonk Machine II.
$0.50

The BC182 is a general purpose NPN transistor in a TO-92 case. The BC182 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC182 has a more narrow hFE range than the BC183 which can be helpful for certain builds.
$0.30

J112 N-Channel JFET in a TO-92 package. Designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
$0.49

J201 N-Channel JFET in a TO-92 package. The J201 is designed primarily for low level audio and general purpose applications with high impedance signal sources.
- Max drain to gate voltage = 40 V
- Max gate to source voltage = -40 V
- Max forward gate current = 50 mA
$4.95