Transformers & Chokes

P-C194A Choke - Hammond, for Fender Deluxe, Deluxe Reverb, etc.
Replacement for Fender Deluxe, Deluxe Reverb, Vibrolux, Vibrolux Reverb Equivalent to Manufacturer part number 125C3A & 022707 Specifications:
  • Inductance ± 15%: 4 H
  • D.C. Current: 50 mA

Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.
$16.42
P-C194B Choke - Hammond, for Fender Bandmaster, Dual Showman, etc.
Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super Equivalent to Manufacturer part number 125C1A & 022699 Specifications:
  • Inductance ± 15%: 4 H
  • D.C. Current: 90 mA

Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.
$17.86
P-C194C Choke - Hammond, replacement for Marshall Plexi JCM800
Replacement for Marshall Plexi JCM 800.
Specifications:
  • Inductance ± 15%: 40 H
  • D.C. Current: 50 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$35.12
P-C194D Choke - Hammond, Replacement for Vox AC30 reissue
Replacement for Vox AC30 reissue
Specifications:
  • Inductance ± 15%: 5 H
  • D.C. Current: 150 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$37.63
P-C194E Choke - Hammond, Replacement for Vox AC30 vintage
Replacement for Vox AC30 vintage
Specifications:
  • Inductance ± 15%: 30 H
  • D.C. Current: 100 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$34.36
P-C194G Choke - Hammond, Replacement for Marshall Plexi
Replacement for Marshall Plexi Specifications:
  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA

Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$22.14
P-CF22699 Filter Choke - 90 mA, for Fender® Twin, Super, Dual Showman
Replacement for Fender Twin, Super, and Dual Showman. Equivalent to #125C1A & #022699.
$13.95
P-CF22707 Filter Choke - 50 mA for Fender® Deluxe & Vibrolux
Replacement for Fender Deluxe and Vibrolux. Equivalent to #125C3A & #022707.
$12.95
On Backorder
P-T1750A Transformer - Hammond, Output for Fender, 3.5W 22.8kΩ
Replacement for Reverb Driver Equivalent to manufacturer part number #125A20B & #022921 Warning: Not all amplifier models of the same name use the same transformer model.
$18.44
P-T1750B Transformer - Hammond, Output replacement for Fender, 10W 5482Ω
Special Order Item
Replacement for Reverb Driver - Vibro King Equivalent to manufacturer part number #24038 Warning: Not all amplifier models of the same name use the same transformer model.
$40.36
Out of Stock
P-T1750C Transformer - Hammond, Output replacement for Fender, 5W 5kΩ / 8kΩ
Replacement for Bronco (AA764, AB764, Blackface, Silverface), Champ (Tweed, 5C1, 5E1, 5F1, AA764, Blackface, Silverface, Vibro Blackface), Harvard (6G10), Princeton (Tweed, 5B2, 5C2, 5D2, 5E2, 5F2, 5F2A). Equivalent to manufacturer part number #125A35A and #022905 Warning: Not all amplifier models of the same name use the same transformer model.
$33.80
P-T1750E Transformer - Hammond, Output replacement for Fender, 15W 8kΩ
Replacement for Princeton Reverb, Tweed Deluxe Equivalent to manufacturer part number #125A10B and #022913 Warning: Not all amplifier models of the same name use the same transformer model.
$38.42
P-T1750F Transformer - Hammond, Output replacement for Fender, 15W 6950Ω
Special Order Item
Replacement for Blues Junior Equivalent to manufacturer part number #49969 Warning: Not all amplifier models of the same name use the same transformer model.
$47.16
Note: special order items require additional lead time. See our page on special order items.
P-T1750G Transformer - Hammond, Output for Yorkville/Traynor 50W
Special Order Item
Replacement for Yorkville/Traynor 50W General
Specifications
  • Power: 50 W
  • Primary Impedance: 3,800 Ω CT
  • Secondary Impedance: 4Ω, 8Ω, 16Ω
  • Coil Type: Paper
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$165.71
Note: special order items require additional lead time. See our page on special order items.
P-T1750H Transformer - Hammond, Output replacement for Fender, 20W 6.6kΩ
Replacement for Deluxe, Deluxe Reverb Equivalent to manufacturer part number #125A1A & #022640 Warning: Not all amplifier models of the same name use the same transformer model.
$38.42
P-T1750J Transformer - Hammond, Output replacement for Fender, 35W 4kΩ
Replacement for Pro-Reverb, Tremolux, Vibrolux Equivalent to manufacturer part number #125A6A and #022848 Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here. Specifications:























Primary: 4,000 C.T.Ω
Secondary:
Power: 35 W
Amp Type: Push-Pull
Coil Type: Plastic Bobbin

Features:
  • Designed for drop in replacement of original units
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used and design specs were kept as close as possible to the original part to preserve the stock "tone".
$50.37
P-T1750JA Output Transformer - Hammond, for Fender Hot Rod Deluxe, 40W 4.25kΩ
Replacement for Hot Rod Deluxe
Equivalent to manufacturer part number #50438
Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
Specifications:


Primary:
4,250 C.T.Ω


Secondary:
4Ω, 8Ω


Power:
40 W


Amp Type:
Push-Pull


Core Type:
Paper


Features:
  • Designed for drop in replacement of original units
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used and design specs were kept as close as possible to the original part to preserve the stock "tone".
$59.21
P-T1750K Transformer - Hammond, Output replacement for Fender, 50W 4kΩ
Replacement for Tweed Bassman, Super Reverb Equivalent to manufacturer part number #125A9A and #022855 Warning: Not all amplifier models of the same name use the same transformer model.
$78.89
P-T1750L Transformer - Hammond, Output replacement for Fender, 50W 4.2kΩ
Replacement for Bassman Equivalent to manufacturer part number #125A13A and #022871 Warning: Not all amplifier models of the same name use the same transformer model.
$77.60
P-T1750M Transformer - Hammond, Output for Fender, 50W 4.2kΩ, general
General Replacement Equivalent to manufacturer part number #125A13A and #022871 Warning: Not all amplifier models of the same name use the same transformer model.
$78.89
P-T1750N Transformer - Hammond, Output for Marshall, 50W 3.2kΩ
Replacement for JMP, JCM800 Specifications
  • Primary: 3,200 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull

Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$86.55
P-T1750NA Transformer - Hammond, Output replacement for Marshall, 30W 6kΩ
Special Order Item
Replacement for JTM30
Specifications
  • Primary: 6,000 C.T.Ω
  • Secondary: 8Ω, 16Ω
  • Power: 30W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$54.59
Note: special order items require additional lead time. See our page on special order items.
P-T1750P Transformer - Hammond, Output for Marshall, 50W 126, 500, 2kΩ
Special Order Item
Replacement for JCM900
Specifications
  • Primary: 126, 500, 2000Ω
  • Secondary: 2Ω, 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$112.88
Note: special order items require additional lead time. See our page on special order items.
P-T1750Q Transformer - Hammond, Output for Marshall, 50W 7371Ω
Replacement for JTM45
Specifications
  • Primary: 7,371 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$99.06
Don't see what you're looking for? Send us your product suggestions!