Transformers & Chokes

1600 Series

Hammond has been producing tube output transformers continuously for over 75 years, constantly improving and tweaking their performance. The output transformer is one of the most critical components in a audiophile amplifier. These excellent designs have survived the years and continue to provide great choices for replacement or new build applications.
P-RC-3 Choke - One Electron, Audio, PRC-3, 225H for Preamp Output
The PRC-3 audio choke from One Electron was designed as a plate load for the output of either a high quality line amplifier or a phono preamp.
$62.26
Save 11%
Originally: $69.95
P-C1536X Choke - 0.17 - 250, Heavy Duty Hash Choke
Molded powdered iron core.
1-1/4 long axial leads.
High inductance & high current.
L measured at 1 Khz. Inductance: 250 µH20% tolerance
DC resistance ohms: .17
Self Resonant Frequency (MHz): 1.5
Maximum DC current amps: 2.5
Coil diameter (in): .43
Core Length (in): 1.25
$0.96
Save 11%
Originally: $1.08
P-T154-P-T156-X Filter Choke - Hammond, Open Bracket
Features
  • Economical "open bracket" - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.
Starting at $11.40
Save 11%
Originally: $12.81
Note:
P-T155B: 6 mH / 2 A
P-T159ZC: 60 mH / 2 A
P-T156M: 3 H / 100 mA
P-T157Q: 3.5 H / 150 mA
P-T156L: 5 H / 75 mA
P-T154G: 9 H / 40 mA (700 ohm)
P-T155C: 60 H / 8 mA
are special order items.
Note: some of these items are special order items.
P-T1650X Transformer - Hammond, Tube Output, Push-Pull
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
Starting at $75.87
Save 11%
Originally: $85.25
Note: P-T1650W: 280 W / 1.9 kΩ is a special order item.
P-T1650XA Transformer - Hammond, Tube Output, Easy Wire Secondary
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
Starting at $100.20
Save 11%
Originally: $112.58
Partially Out of Stock
Note:
P-T1608A: 10 W / 8 kΩ
P-T1650NA: 60 W / 4.3 kΩ
P-T1650PA: 60 W / 6.6 kΩ
P-T1650RA: 100 W / 5 kΩ
P-T1650TA: 120 W / 1.9 kΩ
are special order items.
Note: some of these items are special order items.
P-T162XSEA Transformer - Hammond, Output, Single-Ended, 30 W
Special Order Item
  • Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.
Starting at $134.96
Save 11%
Originally: $151.64
Note: special order items require additional lead time. See our page on special order items.
P-T193X Filter Choke - Hammond, D.C. choke, Enclosed
  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 8" long leads.
  • Units will exhibit less inductance at slightly higher currents or more at lower currents.
  • Perfect for high voltage power supply filtering, case matches power transformers & tube audio output transformers.
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
  • For more sizes and voltages (open - bracket mount type) - see P-T154-P-T156-X
  • Operating temperature range is -40C to 85C
Starting at $34.40
Save 11%
Originally: $38.65
Partially Out of Stock
Note:
P-T193T: 0.05 H / 2 A
P-T193N: 3 H / 500 mA
P-T193P: 5 H / 500 mA
P-T193G: 10 H / 150 mA
P-T193M: 10 H / 300 mA
P-T193Q: 10 H / 500 mA
P-T193B: 12 H / 100 mA
P-T193C: 20 H / 100 mA
are special order items.
Note: some of these items are special order items.
P-T290-FENDER Transformer - Hammond, Guitar Amplifier, replacement for Fender
Replacement for Fender Champ, Vibro Champ, Princeton, Princeton Reverb, Tweed Deluxe Equivalent to Fender part number 125P1B & 022772 Primary:120 VAC, 60 Hz. For 240V version, see P-T290AEX Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Plastic Core
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
Starting at $32.26
Save 11%
Originally: $36.25
P-TM800-C-CE Filter Choke - Marshall Replacement, for JCM800
Replacement filter choke for Marshall JCM800s.
$22.21
Save 11%
Originally: $24.95
P-RC-1 Choke - One Electron, Audio, PRC-1, for Shunt Feed SE Output
The PRC-1 audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes.
$75.65
Save 11%
Originally: $85.00
P-RC-2 Choke - One Electron, Audio, PRC-2, for Shunt Feed SE Output
The PRC-2 audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes.
$62.26
Save 11%
Originally: $69.95
P-H1600-A Switch - Rotary Impedance Selector, for Hammond 1600A series
Includes: 3 pole, 3 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G) (See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)
$10.64
Save 11%
Originally: $11.95
P-C194A Choke - Hammond, for Fender Deluxe, Deluxe Reverb, etc.
Replacement for Fender Deluxe, Deluxe Reverb, Vibrolux, Vibrolux Reverb Equivalent to Manufacturer part number 125C3A & 022707 Specifications: Inductance ± 15% 4 H D.C. Current 50 mA Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$14.61
Save 11%
Originally: $16.42
P-C194B Choke - Hammond, for Fender Bandmaster, Dual Showman, etc.
Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super Equivalent to Manufacturer part number 125C1A & 022699 Specifications:
  • Inductance ± 15%: 4 H
  • D.C. Current: 90 mA

Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.
$15.90
Save 11%
Originally: $17.86
P-C194C Choke - Hammond, replacement for Marshall Plexi JCM800
Replacement for Marshall Plexi JCM 800.


Inductance ± 15%
40 H


D.C. Current
50 mA


Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$31.26
Save 11%
Originally: $35.12
P-C194D Choke - Hammond, Replacement for Vox AC30 reissue
Replacement for Vox AC30 reissue


Inductance ± 15%
5 H


D.C. Current
150 mA


Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$33.49
Save 11%
Originally: $37.63
P-C194E Choke - Hammond, Replacement for Vox AC30 vintage
Replacement for Vox AC30 vintage


Inductance ± 15%
30 H


D.C. Current
100 mA


Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$30.58
Save 11%
Originally: $34.36
P-CF22699 Filter Choke - 90 mA, for Fender® Twin, Super, Dual Showman
Replacement for Fender Twin, Super, and Dual Showman. Equivalent to #125C1A & #022699.
$12.42
Save 11%
Originally: $13.95
P-CF22707 Filter Choke - 50 mA for Fender® Deluxe & Vibrolux
Replacement for Fender Deluxe and Vibrolux. Equivalent to #125C3A & #022707.
$11.53
Save 11%
Originally: $12.95
P-C194G Choke - Hammond, Replacement for Marshall Plexi
Replacement for Marshall Plexi Specifications:
  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA

Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$19.70
Save 11%
Originally: $22.14
Don't see what you're looking for? Send us your product suggestions!