Transformers & Chokes

Hammond

Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
P-T125H Transformer - Hammond, Output, 8 W, 10k Primary
Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187
$37.00
P-T125J Transformer - Hammond, Output, 8 W, 2.5k or 4k Primary
Special Order Item
Specifications Audio Watts: 8 Primary Impendance (Ohms): 2.5k/4K center-tapped Secondary Impendance (Ohms): 6/8 - 3.2/4 Mounting centers: 2-13/16u-bracket Weight: 1.0 lb.
$35.23
Note: special order items require additional lead time. See our page on special order items.
P-T125X Transformer - Hammond, Universal Push-Pull
  • Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits).
  • Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz).
  • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.
  • Tables provided with transformer listing 90 pre-calculated impedance ratios.
Starting at $36.82
Note:
  • 5 W / 45 mA
  • 10 W / 70 mA
are special order items.
Note: some of these items are special order items.
P-T125XSE Transformer - Hammond, Universal Single Ended
  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE).
  • For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
  • Open style with minimum 12" long primary & secondary leads leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.
Starting at $45.84
Note: 25 W / 100 mA is a special order item.
P-T1650X Transformer - Hammond, Tube Output, Push-Pull
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
Starting at $85.25
Note: 280 W / 1.9 kΩ is a special order item.
P-T1650XA Transformer - Hammond, Tube Output, Easy Wire Secondary
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
Starting at $112.58
Note:
  • 10 W / 8 kΩ
  • 60 W / 4.3 kΩ
  • 60 W / 6.6 kΩ
  • 100 W / 5 kΩ
  • 120 W / 1.9 kΩ
are special order items.
Note: some of these items are special order items.
P-T162XSEA Transformer - Hammond, Output, Single-Ended, 30 W
Special Order Item
  • Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.
Starting at $151.64
Save 21%
Originally: $193.01
Note: special order items require additional lead time. See our page on special order items.
P-T1750X-FENDER Transformer - Hammond, Output, replacement for Fender
  • Replacements for Fender Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $18.44
Partially Out of Stock
Note:
  • 5W | 5k/8kΩ | 3.2/8/16Ω
  • 10W | 5482Ω | 8Ω
  • 15W | 6.95kΩ | 8Ω
  • 40W | 4kΩ | 4/8/16Ω
  • 50W | 4kΩ | 2/4/8Ω
  • 60W | 4.2kΩ | 2/4/8Ω
  • 100W | 2kΩ | 4/8/16Ω
  • 135W | 2kΩ | 4/8 Ω
are special order items.
Note: some of these items are special order items.
P-T1750X-MARSHALL Transformer - Hammond, Output, replacement for Marshall
  • Replacements for Marshall Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $37.50
Note:
  • 30-60W | 6kΩ | 8/16 Ω
  • 50W | 126/500/2kΩ | 2/4/8/16Ω
  • 100W | 126/500/2kΩ | 2/4/8/16Ω
are special order items.
Note: some of these items are special order items.
P-T1750X-VOX Transformer - Hammond, Output, replacement for Vox
  • Replacements for Vox Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $95.44
Note:
  • 30W | 4kΩ | 8/16Ω | Paper
  • 30W | 4kΩ | 8/16Ω | Bobbin
are special order items.
Note: some of these items are special order items.
Don't see what you're looking for? Send us your product suggestions!