Transformers & Chokes

P-TF37610 Transformer - Fender®, Power, for '65 Twin Reverb Reissue
Made precisely to the original Fender® specifications. Drop-in replacement for '65 Twin Reverb Reissue. Made in the USA. 120V Primary.
$79.95
P-RC-3 Choke - One Electron, Audio, PRC-3, 225H for Preamp Output
The PRC-3 audio choke from One Electron was designed as a plate load for the output of either a high quality line amplifier or a phono preamp.
$69.95
P-T125H Transformer - Hammond, Output, 8 W, 10k Primary
Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187
$37.00
P-T125J Transformer - Hammond, Output, 8 W, 2.5k or 4k Primary
Special Order Item
Specifications Audio Watts: 8 Primary Impendance (Ohms): 2.5k/4K center-tapped Secondary Impendance (Ohms): 6/8 - 3.2/4 Mounting centers: 2-13/16u-bracket Weight: 1.0 lb.
$35.23
Note: special order items require additional lead time. See our page on special order items.
P-T125X Transformer - Hammond, Universal Push-Pull
  • Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits).
  • Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz).
  • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.
  • Tables provided with transformer listing 90 pre-calculated impedance ratios.
Starting at $36.82
Note:
P-T125B: 5 W / 45 mA
P-T125D: 10 W / 70 mA
are special order items.
Note: some of these items are special order items.
P-T125XSE Transformer - Hammond, Universal Single Ended
  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE).
  • For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
  • Open style with minimum 12" long primary & secondary leads leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.
Starting at $45.84
Note: P-T125GSE: 25 W / 100 mA is a special order item.
P-T1650X Transformer - Hammond, Tube Output, Push-Pull
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
Starting at $85.25
Note: P-T1650W: 280 W / 1.9 kΩ is a special order item.
P-T1650XA Transformer - Hammond, Tube Output, Easy Wire Secondary
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
Starting at $112.58
Note:
P-T1608A: 10 W / 8 kΩ
P-T1650NA: 60 W / 4.3 kΩ
P-T1650PA: 60 W / 6.6 kΩ
P-T1650RA: 100 W / 5 kΩ
P-T1650TA: 120 W / 1.9 kΩ
are special order items.
Note: some of these items are special order items.
P-T162XSEA Transformer - Hammond, Output, Single-Ended, 30 W
Special Order Item
  • Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.
Starting at $151.64
Save 21%
Originally: $193.01
Note: special order items require additional lead time. See our page on special order items.
P-T1750X-FENDER Transformer - Hammond, Output, replacement for Fender
  • Replacements for Fender Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $18.44
P-T1750X-MARSHALL Transformer - Hammond, Output, replacement for Marshall
  • Replacements for Marshall Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $37.50
P-T1750X-VOX Transformer - Hammond, Output, replacement for Vox
  • Replacements for Vox Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $95.44
P-T31 Transformer - Output, 8 W, Single Ended
Specifications
  • Power: 8 W
  • Primary Impedance: 5,000 Ω single-ended
  • Secondary Impedance: 8 Ω
  • Primary DC Resistance (Red to Blue): 230 Ω
  • Mounting Centers: 2.375"
  • Mounting Type: U-bracket
  • Weight: 0.7 lbs
$15.50
P-TF22848-X Transformer - Fender® Replacement, Output, 35 W
Replacement for Pro Reverb, Tremolux, Vibrolux, Bandmaster, and Vibroverb. Equivalent to #125A6A & #022848.
Starting at $43.00
P-TF22871 Transformer - Fender® Replacement, Output, 50 W, 4 Ohm
Replacement for Bassman heads. Equivalent to #125A13A & #022871.
$69.95
P-TF22905 Transformer - Fender® Replacement, Output, 8 W, 3.2 Ohm
Replacement for Fender Champ, VibroChamp, and Bronco amps, 4 ohms.
Equivalent to #125A35A & #022905.
$34.95
P-TF22913 Transformer - Replacement for Fender®, Output, 12W, 8Ω
Generic replacement for Fender Princeton Reverb, Tweed Deluxe, 8 ohms. Transformer is not manufactured by Fender, but is equivalent to #125A10B & #022913.


Specifications


Audio Power
12 W (RMS)


Primary Impedance
8,000 Ω


Secondary Impedance
8 Ω


Mounting Centers
2.875"


Mounting Type
Vertical


Weight
1.0 lbs


Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
$39.95
P-TF26477 Transformer - Fender®, Power, for Tone Master
Fender® Original Tone Master Power Transformer. Equivalent to #026477.
$179.95
P-TF36483 Transformer - Fender®, Power, for '59 Bassman Reissue
Fender® Original '59 Bassman Reissue Power Transformer. Equivalent to #036483.
$89.95
P-TF36485 Transformer - Fender®, Output, 50 W, 2 Ω
Fender® Original '59 Bassman Reissue output transformer. Equivalent to #036485.
$51.95
P-TF41318 Transformer - Fender® Replacement, Output, 25 Watt, 8 Ohm
Replacement for Deluxe and Deluxe Reverb, 8 ohms.
Equivalent to #125A1A & #041318.
$36.24
On Backorder
P-TF49969 Transformer - Output, Replacement for Blues Junior, 15 W
Fender Original Blues Junior output transformer.
Equivalent to #049969.
15 watts.
$25.15
On Backorder
P-TF50438 Transformer - Fender®, Output, Hot Rod Deluxe and Blues Deluxe
Fender Original Hot Rod Deluxe and Blues Deluxe output transformer. 40 watts. Equivalent to #050438.
$41.50
P-TM0100 Transformer - Marshall Replacement, Output, 100 W
Great for upgrading later issue Marshall™ amps. Gives great classic sound.
Good replacement for JMP and JCM 800s. for EL34!
$81.95
Don't see what you're looking for? Send us your product suggestions!