Transformers & Chokes

Fender

Fender® - Founded in Fullerton California by Leo Fender, Fender Musical Instruments Corp is the world's foremost manufacturer of guitars, basses, amplifiers and related equipment dating back to the 1940's.

Hammond

Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
P-T290-MARSHALL Transformer - Hammond, Guitar Amplifier, replacement for Marshall
  • Replacements for Marshall amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $85.88
Save 11%
Originally: $96.50
P-T166F30 Transformer - Hammond, Low Voltage / Filament, Open, 30 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 30 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
$22.25
Save 11%
Originally: $25.00
Note: special order items require additional lead time. See our page on special order items.
P-TF37610 Transformer - Fender®, Power, for '65 Twin Reverb Reissue
Made precisely to the original Fender® specifications. Drop-in replacement for '65 Twin Reverb Reissue. Made in the USA. 120V Primary.
$71.16
Save 11%
Originally: $79.95
On Backorder
P-T109L Transformer - Hammond, 2W Audio Miniature Epoxy Potted
Special Order Item
Features:
  • Perfect for audio input, line matching, isolation or output transformer applications.
  • 2 watt (± 1.5 dB, 300 Hz. - 50 kHz.).
  • Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187" length).
  • Power level ratings are maximum at lowest frequency rating
  • Power can be increased slightly at higher frequencies.
  • Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
$29.49
Save 11%
Originally: $33.14
Note: special order items require additional lead time. See our page on special order items.
P-T126B Transformer - Hammond, Tube Driver Interstage
Special Order Item
Audio watts: 4
Impedance: 5k ohms
D.C. Resistance: 178 ohms
Inductance: 44 henries
Rated D.C. Bias Current: 30 mA
Features:
  • Designed for driver use ONLY in single ended tube output amplifiers. These units replace coupling capacitor circuits for improved sound.
  • Closed style with minimum 8" long leads.
  • All models use bifilar wound windings for exceptional coupling and bandwidth.
  • Minimum frequency response 20 Hz. - 20 Khz (± 1db max. ref. 1 Khz.).
  • The core is gapped to support the specified D.C.
$90.23
Save 11%
Originally: $101.38
Note: special order items require additional lead time. See our page on special order items.
P-T145J Transformer - Hammond, Audio Chassis Mount Driver, 4k primary
Special Order Item
  • Application: Driver
  • Primary Impedance: 4000 ohms
  • Secondary Impedance: 600 ct
  • Primary D.C.: 8 mA
  • Primary D.C. Resistance: 340 ohms
  • Secondary D.C. Resistance: 24 ohms
  • Output: 135 mW
  • Dimensions A: 1.63
  • Dimensions B: 0.88
  • Dimensions C: 0.81
  • Dimensions D: 1.38

Features:
  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
  • Net weight: 0.5 oz.
$19.56
Save 11%
Originally: $21.98
Note: special order items require additional lead time. See our page on special order items.
P-T145N Transformer - Hammond, Audio Chassis Mount Driver, 10k primary
Special Order Item
  • Application: Driver
  • Primary Impedance: 10000 ohms
  • Secondary Impedance: 2000 ct
  • Primary D.C.: 5 mA
  • Primary D.C. Resistance: 700 ohms
  • Secondary D.C. Resistance: 89 ohms
  • Output: 135 mW
  • Dimensions A: 1.63
  • Dimensions B: 0.88
  • Dimensions C: 0.81
  • Dimensions D: 1.38

Features:
  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz.
$19.56
Save 11%
Originally: $21.98
Note: special order items require additional lead time. See our page on special order items.
P-T162F120 Transformer - Hammond, Power, Low Voltage PC Mount Dual Primary
Special Order Item
  • Operate on 50/60 Hz current
  • Low profile, split bobbin design.
  • Dual winding secondaries, non-concentrically wound
  • Units are designed so that all windings must be used
  • Low primary to secondary coupling - no electrostatic shield required.
  • Universal dual primary 115/230V
  • High insulation - Hipot of 2,500V RMS.
  • Class B insulation - 130 degrees C.
$7.47
Save 11%
Originally: $8.39
Note: special order items require additional lead time. See our page on special order items.
P-T166C50 Transformer - Hammond, Low Voltage / Filament, Open, 50 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 50 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
$21.74
Save 11%
Originally: $24.43
Note: special order items require additional lead time. See our page on special order items.
P-T166EA24 Transformer - Hammond, Low Voltage / Filament, Open, 24 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 24 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
$14.16
Save 11%
Originally: $15.91
Note: special order items require additional lead time. See our page on special order items.
P-T166X-36 Transformer - Hammond, Low Voltage / Filament, Open, 36 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 36 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
Starting at $21.24
Save 11%
Originally: $23.87
Note: special order items require additional lead time. See our page on special order items.
P-T166G60 Transformer - Hammond, Low Voltage / Filament, Open, 60 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 60 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
$24.28
Save 11%
Originally: $27.28
Note: special order items require additional lead time. See our page on special order items.
P-T166J16 Transformer - Hammond, Low Voltage / Filament, Open, 16 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 16 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
$10.80
Save 11%
Originally: $12.14
Note: special order items require additional lead time. See our page on special order items.
P-T166K18 Transformer - Hammond, Low Voltage / Filament, Open, 18 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 18 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
$14.41
Save 11%
Originally: $16.19
Note: special order items require additional lead time. See our page on special order items.
P-T166X-5 Transformer - Hammond, Low Voltage / Filament, Open, 5 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 5 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
Starting at $18.30
Save 11%
Originally: $20.56
Note: P-T166R5: 8 A is a special order item.
P-T167X-25 Transformer - Hammond, Low Voltage / Filament, Enclosed, 25 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 25 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
Starting at $33.06
Save 11%
Originally: $37.15
Note: special order items require additional lead time. See our page on special order items.
P-T167J36 Transformer - Hammond, Low Voltage / Filament, Enclosed, 36 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 36 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
$37.68
Save 11%
Originally: $42.34
Note: special order items require additional lead time. See our page on special order items.
P-T167L50 Transformer - Hammond, Low Voltage / Filament, Enclosed, 50 VCT
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • Secondary 50 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
$52.17
Save 11%
Originally: $58.62
Note: special order items require additional lead time. See our page on special order items.
P-T169C Transformer - Hammond, Isolation, 100VA
Special Order Item
Capacity: 100 VA
Features:
  • Primary 115VAC, 60 Hz.
  • Secondary taps @ 90, 100, 110, 115, 120 & 130VAC
  • Electrostatic shield between primary & secondary
  • Connection by flexible leads, 8" minimum length
  • Perfect for critical line voltage needs (examples: older "classic" tube equipment or Japanese 100V equipment).
  • CSA certified (# LR3902)
  • Remember - These units do NOT convert line frequency
$65.21
Save 11%
Originally: $73.27
Note: special order items require additional lead time. See our page on special order items.
P-T176D Transformer - Hammond, Step-Up, 500VA
Special Order Item
Capacity: 500VA Features:
  • Single winding does not provide isolation, for use where equipment is already isolated and only voltage change is required.
  • World wide applications, 50 or 60 Hz.
$143.32
Save 11%
Originally: $161.03
Note: special order items require additional lead time. See our page on special order items.
P-T182L6 Transformer - Hammond, Toroidal Power, Chassis Mount, 30VA
Special Order Item
Specifications
  • VA: 30
  • VAC Secondary (RMS) Series: 12V C.T. @ 2.5A
  • VAC Secondary (RMS) Parallel: 6V @ 5A

Features:
  • Dual Secondary
  • Open Toroid Center
  • Low profile, lightweight, cool running - due to high efficiency toroidal design
  • Dual 117/234 VAC primary, 50/60 Hz.
$60.67
Save 11%
Originally: $68.17
Note: special order items require additional lead time. See our page on special order items.
P-T186E10 Transformer - Hammond, Low Voltage, Single Primary, 10V 5A
Special Order Item
Secondary VAC: 10V C.T.
Current: 5 A
VA Rating: 50
Features:
  • Single Primary 115VAC
  • Operates on 50/60 Hz.
  • Combination solder or quick connect terminals.
  • Split bobbin construction eliminates the need for an electrostatic shield.
  • Hi-pot tested to 2 KV RMS.
  • Economical open style, channel frame - chassis mount design
  • UL recognized & CSA certified.
$17.02
Save 11%
Originally: $19.12
Note: special order items require additional lead time. See our page on special order items.
P-T187X Transformer - Hammond, Low Voltage, Single Primary, 120VCT
Special Order Item
  • Single Primary 115VAC
  • Operates on 50/60 Hz.
  • Combination solder or quick connect terminals.
  • Split bobbin construction eliminates the need for an electrostatic shield.
  • Hi-pot tested to 2 KV RMS.
  • Economical open style, channel frame - chassis mount design
  • UL recognized & CSA certified.
Starting at $9.12
Save 11%
Originally: $10.25
Note: special order items require additional lead time. See our page on special order items.
P-T187E12 Transformer - Hammond, Low Voltage, Dual Primary, 12.6V 4A
Special Order Item
Secondary VAC: 12.6V C.T.
Current: 4 A
VA Rating: 50.4
Features:
  • Dual Primary 115/230VAC
  • Operates on 50/60 Hz.
  • Combination solder or quick connect terminals.
  • Split bobbin construction eliminates the need for an electrostatic shield.
  • Hi-pot tested to 2 KV RMS.
  • Economical open style, channel frame - chassis mount design
  • UL recognized & CSA certified.
$17.38
Save 11%
Originally: $19.53
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!